Off Road Vintage Go Kart Kit Build Project

[@GoPowerSports]

Hope you guys enjoy the kit as much as we do!

[@kevinfeldtmose3990]

wow

[@luckyhakeem3958]

Dengan bahan dan peralatan yang lengkap, sangat memadai …👍

[@mikekrause910]

You can buy a car for what this thing costs

[@vinnyavalanche]

Highway robbery, yall should be ashamed of yourselves charging nearly 2k for a box of pieces when we have to build it! Pathetic money grab. It's an off road go kart for christ sakes not a used car. 2k kiss my ass

[@LuisAlfonsoLopezEspinoza]

​@@luckyhakeem3958❤

[@TheREALOC1972]

I bought one of these for $5 about 5 years ago at an real estate auction but the motor was to run around my 15 acre property, I took it home stripped it down painted the frame with Sand colored truck bed liner and then put it back together and threw a 80cc Suzuki dirt bike engine and rear wheel sprocket on it . That thing absolutely rips.

[@PetroKingRacing120]

With this kit, you get many levels of value! The ability to customize to your preference, and memories of building and sending it with your kiddo!! I’ve had a few and plan to build more.

[@GoPowerSports]

Very true! Thanks for checking out!

[@kevinbaker6168]

I would recommend drilling and taping your spindles for grease fittings. Over the life of the go kart that will add many years of use without unlubed wear on the front end.

[@garyhenry3103]

I wish that all instructional videos where this well made. Great job guys.

[@GoPowerSports]

Thank you!

[@paulhamlet951]

I agree. One of the clearest and most well done videos. Great job.

[@bullfrogjay4383]

I love the design of this cart ! If I ever build one, it will be with this kit.

[@GoPowerSports]

Thanks!

[@sicks6six]

A while back I looked for someone selling a full off road DIY kit in the UK and no one was. Some would sell you an engine. Someone else the wheels and steering. Etc etc but nobody had put all the components together in one package. And no welding needed as well.. bonus. You should ship to UK.

[@wise_guy_93]

Очень классный багги! Всё сделано удобно и ничего лишнего. Порадовала конструкция передней подвески из пружин. Первый раз такое вижу на подобных багги. 👍 Хотелось бы ещё заднюю подвеску увидеть на подобной машине. 🤔

[@GoPowerSports]

Party on.

[@charlesphillips3982]

For sure a must buy, I think I'm gonna look into a Honda motor for mine but will probably settle for a 212cc from Harbor freight.

[@BOSAKOMBO24]

Saya dari Indonesia..dan sedang dalam proses meniru car ini...semoga saya berhasil belajar dari video anda..terima kasih banyak kawan

[@GoPowerSports]

Party on

[@dubbydixon2410]

Manco Dingo the holy grail , they Pour the foundation for carting, Badass vintage carts

[@GoPowerSports]

For sure, we love it.

[@mikesbarn1858]

Brief side note. The steering spindles beak off frequently. I welded a piece of angle iron to the top and cut 1/8 inch off the bottom to compensate. Never had another problem.

[@iruconji1777]

Can you provide more detail?

[@Tom-h3s4x]

Why is it that, at age 55, I am still quite certain that I NEED a couple of these?

[@Echoes265]

Because we are Cool and Younger than many 20 year Old Biden Supporter i guess🕶️

[@PopJacare]

ditto!!!!😂😂😂

[@rangedayryan1057]

Because boys don't get older, just more tired

[@Gruuvin1]

50 here, and I want one too, even though I know getting in it, and out of it, ain't gonna be pretty at all!

[@IvanRx76]

Go for it!!!!

[@NE_Pigeons]

Very nice thorough video! Prior to watching this I was totally clueless on the building a gokart but this really helped!

[@GoPowerSports]

Glad it helped!

[@BeetleSmasher]

I’m ordering a 212 tillotson hemi electric start engine, and a 30 series belt for my gokart can’t wait. love what y’all do

[@dahourebiai9402]

Good

[@brianargo1659]

Looks like the steering spindles could use some plastic washers to help it to work a little smoother since it doesn't have a way to hold some kind of grease. Especially with that spring putting pressure down on it. But either way. Cool little set up 👍

[@fabiojaneiro5614]

Projeto muito legal , vou fazer um igual aqui no Brasil valeu

[@williamgibble8361]

I have a vintage mini bike project I need to finish!! Cool stuff !!

[@starpuss]

*Looks Like a Great Kit!!!*

[@buddywaldon5329]

Love this cart guys, but... all steering and wheel end nuts should be castle nuts with cotter pins. Lock nuts will probably never come lose, but what if they do. Remember, that front left wheel is spinning against the nut. If the wheel bearing fails, it could screw that wheel right off. Would hate to see yall face any trouble. With all that said, I love the simplicity of the kit. No doubt its quality. My 5 year old would love it.

[@123locona]

Bom trabalho, projeto ficou muito bom! Quero fazer agora aqui no Brasil

[@alohabobbylaguna1702]

Go Power Sports you are a great Company

[@GoPowerSports]

Thanks!

[@robertogolonmunoz5962]

incredible work, excellent project and greetings from Guatemala.

[@alexisgimenez8591]

Buenas noches. Muy bueno tú proyecto. Felicitaciones. De casualidad puedes publicar la distancia entre el eje delantero al eje trasero? Y los HP del motor. Gracias Saludos .

[@jeffreyangel497]

Love it. Very clear tutorial. Hope i can build one soon out of this video😊😊😊

[@GoPowerSports]

Much appreciated, thanks for checking us out!

[@mademania]

high level of manufacturing 👍

[@YkDvKidd]

The way you’re running through it my boy 😂💯💯 fastest build I seen yet lol gud stuff man .

[@GoPowerSports]

You already know!

[@shawnjohnson737]

I might have to buy this gocart

[@MrPlumber27]

You guys are just down the road from me !

[@keithstewart1979]

Looks like I'll need to tear down my rear axel and move the lock collars to the outside of the bearings. Also need bigger risers because those 1" don't raise up a 420/40series enough.

[@scootersonlyrepair6773]

Just buy 2 more and add them to the outside

[@jimjim129]

Did u put a 420 on this exact kart?

[@jimjim129]

Did u put a 420 on this exact kart?

[@keithstewart1979]

@@jimjim129 yes sir

[@keithstewart1979]

@@jimjim129 yeah, I have a couple of vids on my page.

[@bertgrau3934]

That looks like a good kit. I want to build one a little heavier and more power like a V twin with 22-25 horsepower and high speed.

[@HARLINSVIKINGLIFELNC]

Now All ya Need!!! is a 4stroke 250 KX Dirtbike motor!! & yer' READY!! TO GO!!>>

[@devenbelanger8463]

That looks like a solid kit but if you are mechanically inclined at all just build your own. No engine included and to ship to a residential area it’s 1299 plus another 450 for shipping. You’ll spend less than that in materials

[@THECHOSENONE-bk7xg]

I was just about to say. Final price with shipping is out there for a basic kart frame setup only

[@devenbelanger8463]

@@THECHOSENONE-bk7xg ya. Almost 2k is a little much

[@jonwodziak4167]

2k you can get an atv...

[@kricketman12]

im sure this is the best kart built but 1500 kart plus 300 to 500 shipping ill pass

[@rome79735]

Good point Bryan, so with that kind of price, heck I'll just to the local store and purchase one there and bring it back.

[@michaelclarke4629]

For that price, I can purchase rotax 125 senior race kart used

[@donaldconnolly220]

my uncle built go carts for sears....he used all american parts....brigs and stratton engines.....welded up the frames...useing american steel...

[@GoPowerSports]

Sounds like one legit guy!

[@fatbuddycat]

Darn you Taylor!!!! I'm already daydreaming!!

[@justinulrich2128]

Looks fun for a little dirt track. But idk about spending almost $2000 after taxes and shipping. Think I just stick with video. Thanks guys

[@adamclinton195atgmail7]

Do you need parts??

[@arduinomaquinas]

Wow, awesome kart 👏👏👏

[@GoPowerSports]

Thank you! Cheers!

[@JasonBlake-e9l]

Nice job pal.can u give me a price for the kit plus can u ship to Ireland??? Jay....

[@jacquesdutron9954]

Wow, this is awesome. I need few of them. Thx a lot

[@GoPowerSports]

Glad you like them!

[@jenkins9279]

I wish I could just buy this whole kit for my silver fox frame.

[@stanlucas665]

Another cool build guys

[@16driver16]

Best design ever!

[@c3bam1]

Awesome build...it’ll probably take me six months to complete this build! 😅😂😂😂

[@JeriDro]

off road with no suspension, sounds fun!

[@dillenarmstrong5907]

No way I have this same frame!!

[@rhs7129]

I would buy one in a heart beat

[@williamgibble8361]

One stop shopping!!

[@charleswilliams8197]

That's a very nice looking go cart I really wish that they had this type of cart when I was younger because I really know that I would of found a way to purchase one for myself for real people for real okay thanks Charles Williams

[@GoPowerSports]

Good thing you can get one now!

[@nathansilva1605]

é melhor projeto que já. para ser tão simples. você vende esse projeto ?

[@mikesbarn1858]

Sweet. Can’t wait to see full send.

[@juraganlas2637]

cool go kart boss

[@mastertam]

Great kit and well explanation video. Just wondering will there be configuration to have a reverse gear mounted to the torque converter?

[@mikedean8294]

This is a good vidio well thought about thanks go power sports

[@Eueminhasideias]

Uma obra de arte

[@GoPowerSports]

brap brap

[@arduinomaquinas]

Subscribed 🇧🇷😉👍

[@outlawflyer7868]

Have you guys done a video on "how to chose the right live axle kit for your go-kart" and if not, will you. I wan't to put a live axle on my daughters go kart but I have no idea which to chose from. Thank you...

[@scootersonlyrepair6773]

There are not a lot of options just get one that fits. And get the 4 bolt hubs the extra twisting force whilst turning is not great for the 3 bolt.

[@pbjealousy2348]

Sass’s

[@themanofquality3582]

Indonesia present👋🇮🇩

[@davidbean5807]

Use an old pair of pliers and weld a washer on each outside of the jaws sticking out. Use to help pinch springs.

[@EDINEIDEJESUS-z6w]

Párabens dá hora vou fazer um também

[@bobby5139]

Cant wait to see the next video.looks fun to drive

[@jairoponce1487]

Excelente Bendiciones

[@suherman6119]

Great... The best and simple design bro... 👍

[@GoPowerSports]

Thank you! Cheers!

[@brianargo1659]

I bet u could weld a washer on top and bottom of the spindle just big enough for that king pin bolt to go through it but tap a grease fitting on the side of it and the u could fill it up with grease👍

[@mr.braapalicious]

Looks like a well thought out kit! Congrats.

[@dylindambrosio8353]

why on earth would they go metric and imperial for the hardware... bad form peter bad form

[@thusitharathnayaka1521]

Nice job boss

[@nigeenhessamijanisch8559]

Ever had any problems holding the axle sprockets in place with just lock collars? Most things I've read encourage welding as the lock collars can come loose from time to time

[@techworksinfo]

Good work bro

[@GoPowerSports]

Thank you so much 😀

[@moselomika9423]

I like your project Expand it to my place too Good

[@tjkoker]

So jealous. You're doing what I always. dreamed of doing. Great product. Cheers.

[@centeguahan3760]

KZbin videos? it's not that hard actually. all you'll need is a camera, a Google account(such as the one you commented from, or create a new one Specifically for your audience) & an Audience of course! 😊 there's many videos on here explaining how to start your channel up if you're interested. hope this helps with your future life goals! 👍🏾

[@brianoneal1415]

I sure wish u could supply a catalog

[@gilvanalbuquerque4044]

trabalho magnífico, parabéns

[@rumandredbull22rummy57]

Wish u guys had a shop in Canada was gonna order some parts but shipping was twice the cost of what I wanted

[@adamclinton195atgmail7]

What do you need???

[@jimmy-mj5ex]

Just ordered some parts from you guys for my Coleman haha🤟🏻

[@78347820]

Same! I'm building a cammed out stage 4 Propoint 420cc (gx390 clone) for it and gopowersports always seems to have the parts I need even when nobody else has them in stock.

[@dereklea1183]

Would love to build one of these. I’m 6’ 2” tall and don’t believe I could fit well with this kart.

[@tomortale2333]

WOW JUST A LOT TO IT ALLL...

[@GoPowerSports]

Right?

[@joshuarogers5233]

Great job Taylor

[@ahautochanel]

Good I like it

[@GoPowerSports]

Thanks for checking it out!

[@forkjob]

Is it the responsibility of the purchaser to finish weld the axle bearing hangers?

[@Sanya_PitBagger]

Сборка отличная, жаль стоит не мало

[@GararIngvarsson]

I am impressed and the video is very good

[@marionunez9516]

Nice job! Great work.

[@nextlevelgarage3481]

Very good job 👍🏻

[@ephraimmichel3923]

Good job bro.🔥🔥🔥

[@GoPowerSports]

Thanks!

[@chax2004]

Can you sub out the knobbies for slicks in the kit?

[@GoPowerSports]

You if you purchase this kit as a roller.

[@mushroomon]

Nice I have something like that but my opinion I rather the old thunder ⚡ carts.the belt doesn't do good on grass.but gokart are fun..

[@GoPowerSports]

Fair enough!

[@robertbeaulieu8721]

The thing that stood out the most was no burs on the metal parts all bolts nuts were easy to thread and all parts actually fit where were they manufactured?

[@GoPowerSports]

The Frame and Hardware came from the USA.

[@rsz90182]

I got one for $30 at a metal scrap yard in perfect original condition and original wheels.

[@Wilson_Racing]

Do you sell the thick keyed washer that goes on the driver pulley? I have to use a regular washer and it doesn't really work as well

[@markanthonypetra]

I'm considering building a Cycle Kart out of this kit.....I was wondering how it would steer with the 17 inch Honda CT90 wheels with no Ackerman built into the front axle/spindles?

[@nickw3867]

Rear wheels are a .01 interference fit on the axle. Once I had it on enough to realize the problem, it was too late to stop so I smoked it down with a pipe wrench and a 250lbft impact driver. Any suggestions on how to get the wheel back off in the future?

[@morgankovarik3649]

Is it just me or do others question the strength of the 4 tack welds on the bearing brackets?

[@ryanmakurat3769]

Can't believe they haven't commented about this yet...?

[@morgankovarik3649]

@@ryanmakurat3769 don't think they really care.

[@harryrenner4016]

I prefer to use pillow blocks on my kart over flanged bearings.

[@morgankovarik3649]

As do I Harry.

[@DracolegacyOfficial]

that camera really hates changing focus

[@stevejohnson8703]

Those lock collars on bearings should turn till tight with rotation. Sounds backward but it's not. Back when they first came out they came with instructions, before you were born.

[@SHSPVR]

I agree I not fan of those type wheel bearing I perf them with spacer in side

[@harryrenner4016]

I prefer to use pillow blocks on my kart instead flanged bearings.

[@la-a3ro]

im soo getting it

[@Hitycooking]

Nice work brother 👍👍👍

[@pisitumporn3851]

The front suspension geometry should be improve like a go-kart

[@shakyhandpictures2185]

You need to ship one of these to the boys at cars and cameras, increase your exposure by 10x. They really do give you guys more than your monies worth when you ship them stuff for their projects! Just sayin! Cheers !

[@Picklejam08]

What are you talking about? GoPowerSports does plenty of product promotions on Cars and Cameras and Red Beard's Garage. GoPowerSports understands product marketing and exposure on KZbin and their return on investment for free products shipped to KZbin shows for their projects. Why do you offer crazy obvious advise like this? Do you think these people are stupid? That's why they have a successful business. Go get your MBA.

[@DiogoAlmeida-hy9sq]

hello, very good congratulations! Do you have a drawing with the measurements of the structure?

[@GoPowerSports]

Love that you love it!

[@lucasmelo4151]

Top de mais , parabéns 👏👏👏

[@sheriff-larue7770]

Wow, gold plated frame at 1200 bucks

[@DaddyDanu]

is it me or you guys also hearing the theme song of the game Freedom Fighter. Just herd Isabella Angelina saying " the chief will see you now"