Govee Outdoor Permanent Lights (Subscriber Install) @GOVEE

Here are the products used in this video
"Amazon and the Amazon logo are trademarks of Amazon.com, Inc. or its affiliates"
All products used in this video are in links below...
Govee 100 ft Outdoor Permanent Lighting
www.amazon.com/dp/B0BCQ3C4T2?...
Govee 50ft Outdoor Permanent Lighting
www.amazon.com/Govee-Permanen...
LED Clips
www.amazon.com/dp/B0B2KM17F4/...
BTF-3 PIn 18 Awg LED Addressable Wire
www.amazon.com/dp/B07SKGTCWQ/...
CrocSee Electrical Heat Shrink Sleeves(Solder Filled)
www.amazon.com/CrocSee-Connec...
Heat Gun
www.amazon.com/Wagner-Variabl...
Ryobi Brad Nail Gun Brushless 18Gauge
www.amazon.com/Ryobi-One-18GA...
1" Brad Nails
www.amazon.com/meite-Length-G...
2"x2" Wood Squares
www.amazon.com/gp/product/B07...
Amacool Bladeless Neck-fan
www.amazon.com/dp/B08XZBDWG1/...
FrSara Neck Fan
www.amazon.com/dp/B08FZJKCJ9/...
Ryobi Glue Gun
www.amazon.com/dp/B0BP9YM9LT/...

[@jbsdiytv]

My Pinterest account has been deactivated. Sorry everyone. I have placed all the products in the description. (3dots) You also find them here as well. lnk.bio/jbsdiytv

[@ItsTrizzy262]

Good thing the new pro's come in black

[@jbsdiytv]

That’s true, I’ve done many pro installs now and wish I didn’t have to spray all those strands. We like working with the pros. Still don’t know why they have not released the module driver for these pros

[@chipburns4123]

Those look good and you used the correct crimps! Too bad you didnt use the audio feature for the lights in sync with the background music😂

[@jbsdiytv]

Lmao😂 man, you’re right I should have. This short video has the most views on all my social platforms. Insane

[@EBdiesel08]

🇺🇸🇺🇸🇺🇸🇺🇸🇺🇸

[@thebigdoghimself]

I used wire channels with 3m tape for mine, completly hides the wire and eliminates nails or screws. I did have to cut the tracks to 15.5 inches to fit in between the LED housings.

[@arjunc2266]

That’s exactly what I was thinking of doing! What wire channel did you use (solid/flex?), and how many inches away from the wall did you install your lights? I am trying to find some wire channels that are super slim, and just enough to conceal the skinny wire in between the RBG modules.

[@thebigdoghimself]

@@arjunc2266 I posted links but youtube deleted them. here are the amazon asin track 2x per 50' of lights B08NP6VJ3T and teh adhesive tape MYFAMIREA

[@thebigdoghimself]

@@arjunc2266 I mounted mine about 5" from the wall and that was because my eve on the front of my house is only 6" wide, you will have to play with it to see how you like it. I tend to prefer it closer to the front because the trim hides the wires.

[@surfer8210]

@@thebigdoghimself Do you have a link to the channels which you’ve used?

[@rgarcia83]

The string lights doesn't seem to be covering the entire wall as the pictures claim to be. I'm I wrong?

[@jbsdiytv]

Hi. I’m not sure I understand the question. The lights were placed 2” off the wall

[@richardforysiak5926]

Are you able to cut the wire and add some blank wire when going from diffrent roof lines.

[@jbsdiytv]

Hi there and thanks for watching. If you have just one small jump that is about 3ft then it’s doable but if you have multiple(at least 5) jumps then you will need to try and keep those under 2ft. On the first generation lights, the 100ft kit comes with one 12ft blank extension. The 150ft comes with two. On the Pros, comes with one 12ft blank extension and two 4ft. Hope this helps you

[@JeremyR7902]

Taping mine for paint as we speak, did it still light up the same? Notice any accidental overspray on the lens when testing?

[@jbsdiytv]

Hi there. Just spraying a little farther away near the lens. There wasn’t any difference

[@asmraroundtheworld6870]

What are those clips called did you get them at Amazon

[@jbsdiytv]

Visit my Pinterest link at the top and go to saved items on the site. There is a board for all Govee products. You can also find them on my other Govee videos. Let me know if you can’t don’t them and I’ll add them in this video description. Thanks for watching

[@_Paul.]

The Pinterest link didn't work for me

[@jbsdiytv]

The Pinterest account has been deactivated and the clips are not available on Amazon. Visit AliExpress. It's called RGBCCT Official Store. 10mm

[@dexterneighbors1180]

Can brad nailer be used on metal instead of wood?

[@jbsdiytv]

Sorry, thought I responded on this comment. No, I would not recommend it. You literally have to find each rafter that holds that and to nail exactly on that spot, it will be a pain. The nail on just bare metal has no grab. You will need a fine thread screw with a fine point tip so it can grasp the metal

[@mambawatts]

Will a 100 ft govee enough for just the front side of a regular house

[@jbsdiytv]

That’s really difficult to determine because one’s house may be bigger from the front than another. Use google earth to measure end points of your roof

[@user-qu9bs6tm7u]

Where can I find the black Grover lights

[@jbsdiytv]

There are links in my description. They are the Govee Pros. There are also links in my description I’m my other videos

[@Supplemental-Income]

How did you paint then?

[@jbsdiytv]

Hi there. Take a look at one of my shorts that shows my process of getting the lights prepped and painted. It’s the soffit color match. It’s painters touch spray and clear coat protectant

[@USNGaribay]

But why?

[@jbsdiytv]

Why what??

[@mihaeladog7187]

What about aluminium eavestrough

[@jbsdiytv]

Use these pins in the small holes to hold your lights in place amzn.to/47GmE7i

[@Jesus-un6ek]

What happened in September

[@jbsdiytv]

The date is on the video, google it and you’ll see what happen and maybe reconsider your comment

[@robertivey8519]

Very tacky. Screams lower middle class

[@UnknownUser_0000]

If you're here, you were considering them. 🤡

[@jbsdiytv]

@UnknownUser_0000 😂🏆

[@CyprusTM]

@@UnknownUser_0000 You left the clown speachless :)

[@23marsh66]

😂​@@CyprusTM