14 күн бұрын
Жыл бұрын
Жыл бұрын
Пікірлер
@naushinamukhtar1968 21 сағат бұрын
Wonderful 🎉
@naushinamukhtar1968 21 сағат бұрын
Awesome 🫶👍🙌 can’t wait to have our home 🏡 this lights 😊
@naushinamukhtar1968 2 күн бұрын
Interested! I am located in San Antonio please can you all share installation details
@jbsdiytv 2 күн бұрын
@naushinamukhtar1968 hi there and thank you for your interest in a Govee outdoor permanent lighting install. Under the description there are two links that you can reach us at. We will ask a few questions about your linear feet of roofline, model type of lights and pricing. You can also reach us at the number on the business card at the end of this video. We look forward to hearing from you🙂
@Banana69999 5 күн бұрын
Can the power adapter be either on the end or start of the wires?
@jbsdiytv 4 күн бұрын
No, the power adapter and controller need to be directionally to properly perform like they should. Each end has a male connection and female connection. The female connection is the start of the strand. The controller where the lights get hooked up is a male connection with 3 prongs
@Banana69999 7 күн бұрын
What if one bulb goes out, do you need to replace the whole strand or just the one?
@jbsdiytv 4 күн бұрын
If one bulb goes out you can splice the product with a new bulb. That is an option but why do that when Govee backs their products with warranties and they have exceptional customer service. All you will have to do is go into the Govee app and report an issue for a replacement
@brentroxx 7 күн бұрын
What size nails/brads did you use in the nailer to attach the clips?
@jbsdiytv 4 күн бұрын
The Brad nailer I used was a Ryobi 18gauge with 1” nails. The links are in the description so you know the exact info of the products. Thanks for watching
@Banana69999 7 күн бұрын
Are these lights the same as companies like trim light, Astoria, jelly fish, etc uses?
@jbsdiytv 4 күн бұрын
No they are not. This is a Govee DIY product. Trim light uses pixels, others use pucks lights that snap into a track. Most of those companies charge 5-7k for 100ft install. We are just meticulous with all our installs and we install above the manufacturer’s recommendations to last longer
@lotevalencia 11 күн бұрын
I'm wondering if you could help me I'm having trouble playing the music that is saved on my phone on the Govi lamp Pro do you have any insight when I pull up the lamps on my bluetooth app on my phone and click on them it says needs another app
@jbsdiytv 10 күн бұрын
Someone was having the same issue on my facebook Govee group. With the app updates, some firmware isn’t updated so if you have an iPhone, offload the app and bring it back. If that doesn’t work for you then delete the app and reinstall it. That should fix it. Don’t worry, deleting the app isn’t deleting your devices, just sign back in and it will all be there. Hope this helps you.
@vanessagranados4346 14 күн бұрын
I applied one of the DIY that I liked from someone else but how do I save it so it can be used every day. I notice that i have to manually apply it. It doesn’t automatically saves.
@jbsdiytv 14 күн бұрын
When you search for a user diy scene, their profile will have a star at the bottom right corner. Hit that and that star will light up orange.
@vanessagranados4346 9 күн бұрын
Thank you for responding. I was able to save it. Now how can I see my Saved DYI?
@jbsdiytv 9 күн бұрын
@vanessagranados4346 Watch this video to find the hidden gems in DIY kzbin.info/www/bejne/joW3daWmpNFsmdksi=Nn9w9a0wmb_ihQRz
@vanessagranados4346 9 күн бұрын
@@jbsdiytv why when I apply the DYI that I liked it only last for like 2 hrs ?? Then goes back to my old scene 😢
@jbsdiytv 9 күн бұрын
That means you have either Alexa hunches on and thinks you sleep and left them on or you have a schedule that is running. Delete all unwanted schedules not in use, and double check your timers in the main device screen If you have Facebook, visit my Govee group so I or the members can further assist you with snapshots of your issues facebook.com/share/KK4sgu3H4u1KeSAM/?mibextid=K35XfP
@napalmdotnet 16 күн бұрын
Very clean install. Homeowners should be happy with the results.
@jbsdiytv 16 күн бұрын
They absolutely were happy. We traveled 265miles to take care of this install. They thought we wouldn’t travel that far but after having a few conversations they were pleased to hear we confirmed a day. Thanks for watching🙏
@XxGuNsLiNgErxX123 18 күн бұрын
Do u happen to know where movie watching dreamview went I had my govee light bar and lamp synced up to my t.v ever since the update I can't find it?
@jbsdiytv 18 күн бұрын
Scenic Dreamview is under home like the 5th one down
@XxGuNsLiNgErxX123 18 күн бұрын
@@jbsdiytv awesome thank you!!!! It worked!!!
@jeremyrobinson1464 18 күн бұрын
JB, do you do any out of state installs?
@jbsdiytv 18 күн бұрын
I will be in New Mexico for an install the week of 4th of July. What state are you located? We might consider it maybe
@jeremyrobinson1464 18 күн бұрын
@@jbsdiytv I'm in Jonesboro, AR. I have a 200ft pro kit. I sent you an email earlier as well.
@jbsdiytv 18 күн бұрын
@jeremyrobinson1464 I didn’t receive an email. Message me here facebook.com/share/BZiuXPZ93SyrNQEE/?mibextid=LQQJ4d
@watch_your_six 19 күн бұрын
Another dope install by my boy JB! Great job man. This is a really clean install. I mean they all are coming from you lol😂
@jbsdiytv 19 күн бұрын
Thanks Bro, wait till this next one we did this weekend in Flower Mound, Tx. That one came out great
@ralghjones 25 күн бұрын
Nice work . Have you ever put in a Y connection ? If so can one leg of the Y be continued farther than the other leg ?
@jbsdiytv 25 күн бұрын
Thanks. Yes you can do a Y connection but just keep in mind they will mirror each other whichever one is connected to that strand. You won’t get that strand to respond individually in spot lighting. You turn one on at the bottom, one turns on at the top
@danwhitehorse1492 25 күн бұрын
Nice job!😁
@jbsdiytv 25 күн бұрын
Thank you👍
@jwill9223 Ай бұрын
I need your info so I can get mines installed.
@jbsdiytv Ай бұрын
m.facebook.com/jbsholidaylightingsanantonio?mibextid=LQQJ4d you can message us here
@bevoduz77 Ай бұрын
You seem very knowledgeable about these lights, and I can't get an answer from govee so maybe you can help? I am about to hang my 2nd set of outdoor permanent lights (original not pro), and where I have electrical, and for daytime aesthetics, I'd like to have the lights both start (power supplies and controllers) on the back right of the house, and then meet on the front of the house near the door (not connect just ends of both sets near each other). If I do this, can I reverse one string so they flow together correctly? Or, do I have to just deal with having the 2nd set start where the 1st set ends. I'm maxing the distance on the first set as it's already mounted, so this is all about adding the 2nd set. Great videos though appreciate it!!!
@jbsdiytv Ай бұрын
Not a problem. I would like to dig deeper into your install with some images and conversations. Your install my help others on my group I created. Come visit us and get some advice. I’m the admin on the group facebook.com/share/jHjvTxe3THrRH5sb/?mibextid=K35XfP
@bevoduz77 Ай бұрын
@@jbsdiytv wow that was fast! Thanks, I just joined and will post there now thanks!!!
@jbsdiytv Ай бұрын
I saw it come in. Thank you. We hope to help you in all aspects of Govee products and projects. Let’s GOvee!!!🤟
@podboq2 Ай бұрын
Within 20 ft of neighbors’ windows on both sides - I hope you decided to maintain friendly relations with them rather than deprive them of any enjoyment of their property by your enjoyment of yours. It takes a village.
@jbsdiytv Ай бұрын
I’m confused by your question. Hope I understand correctly. My neighbors are ok with it as well. As far as your neighbors, is it my client you speak of? There’s always going be someone that complains and the one with the lights will have to figure out how to use the app to turn those section off
@johnphillips3526 Ай бұрын
Does the controller have to be placed anywhere specific?
@jbsdiytv Ай бұрын
It depends. How many controllers do you have? If it’s one as long as it’s near your router to connect first. If it’s two then connect them first in your app and then you can install them. Try and keep them close to your attic entrance to be able to calibrate them if you have the pro version. You can add an extension before you get to your lights and after the controller. If you have non pros then you need to keep in mind that when install left to right it will cast a purple white and right to left will be a greenish white. This is because the non pros use 3 different colors to make white and it’s the way the diode is manufactured in place
@johnphillips3526 Ай бұрын
@@jbsdiytv Thanks! I have 150’ pro version with one controller.
@jbsdiytv Ай бұрын
Your welcome. You’ll be fine with whatever you do then. Attic is what we do if it works for your install. If not we use this waterproof box when the device is exposed. amzn.to/3RG4soV
@johnphillips3526 Ай бұрын
@@jbsdiytv ran out of anchors for the wire. Is there a place where you can buy them locally?
@jbsdiytv Ай бұрын
@johnphillips3526 amzn.to/3TbQMmr they are available on amazon
@slayerx2000 Ай бұрын
Dude thanks! App updated and I felt totally lost...again. Barely understood the old one but this video makes this version seem pretty easy.
@jbsdiytv Ай бұрын
Thats awesome to hear!! Glad it worked out. The app is full of treasures but you just need a good guide to help you find it. Let’s GOvee!!🤟
@watch_your_six Ай бұрын
Thank you for the detailed video! Very informative and helpful as always JB!!
@jbsdiytv Ай бұрын
Glad it was helpful to you. We appreciate your comment. Hope all is well
@Jsarson1976 Ай бұрын
Thanks you have helped so much and I have 10 govee lights.
@jbsdiytv Ай бұрын
Your welcome. Not a problem at all. Glad we could help you in anyway. You said you have 10 govee devices? Look out for my new govee app video which will cover the DIY section of the app
@jeffcasey353 Ай бұрын
Since mine have the same starting point, is there a way to program one CW and the other CCW?
@jbsdiytv Ай бұрын
Thank you for your comment. If I understand correctly…both your devices start at point A but they work opposite to each other as opposed to running them in the same direction. In this case for the Govee scenes you can’t edit their direction of clockwise and counterclockwise. Now, if you were to create you own scenes in DIY or Fingersketch, then yes there is a directional clockwise or counterclockwise that can be done. You would need to duplicate your DIY so it will be best to create it under the DIY tab instead of. If you would like to know more about the app or share your advice, join my FB Govee App Advice/Questions group facebook.com/share/y2EwyNHUbQcvrgyk/?mibextid=K35XfP
@ctmreynolds Ай бұрын
You said one controller for 200’. Did that change with the pro? I thought you could only run 150’
@jbsdiytv Ай бұрын
Correct. At that time we installed 2-100ft kits together on one controller and it worked. Since the firmware updates we had to go back and add the LED Driver Module after the fifth strand of lights because there were performance issues after the updates. I would recommend adding that LED Driver Module always now if going passed 150ft. Thank you for your comment
@jbsdiytv Ай бұрын
One thing I didn’t mentioned is that if you hit the star at the bottom right, you can save their DIY. Hope this helps
@gavinregister1344 Ай бұрын
What the heck did Govee do to the app? Sorry to say, that these outdated videos are no longer usable if Govee makes such big changes to their app. Can’t even follow how to set up my pro lights now. Frustrating! JB, reach back out to Govee about this and see if they have a fix or a better tutorial. Appreciate your videos JB!
@jbsdiytv Ай бұрын
I absolutely agree. I’ve contacted them and they are moving forward with the updates. Yeah I understand about the older videos. I plan to make a new updated video so I’m quickly learning everything they have changed and finding where they put it. Thanks for your concern. I’ve also made a new FB Govee group that focuses on solely on the app for advice and questions. You’re more than welcome to join and put your input. I created this to help out my followers. facebook.com/share/2J7qhMDYTKfoXZAd/?mibextid=K35XfP
@ronaldmoody652 Ай бұрын
How much will you charge so I can tell my neighbors when I buy Govee lights pro.
@jbsdiytv Ай бұрын
Ronald, please contact me here to get a qoute started for you. facebook.com/share/znp4ur9GsjGrWXGm/?mibextid=LQQJ4d
@ronaldmoody652 Ай бұрын
How can I get someone to install govee lights in Oklahoma
@jbsdiytv Ай бұрын
I can ask on the FB Govee group I’m in to see if there are any installers. If there isn’t, I don’t mind traveling to take care of your install
@azbobcatt9534 Ай бұрын
Do you rapidly click off and on
@jbsdiytv Ай бұрын
What are you referring to?
@erniewyles8832 Ай бұрын
Found and followed you on the app. Good stuff. Thank you! :)
@jbsdiytv Ай бұрын
We appreciate the support. Thank you🙏
@rgarcia83 Ай бұрын
The string lights doesn't seem to be covering the entire wall as the pictures claim to be. I'm I wrong?
@jbsdiytv Ай бұрын
Hi. I’m not sure I understand the question. The lights were placed 2” off the wall
@jbsdiytv Ай бұрын
Failed to mention. If you can’t find the wheel then that’s because you have to hit the plus symbol first then add a diy first from shortcut management. Then you will see the wheel pop up. Sorry about that
@ChrisMavrou Ай бұрын
Great job, Thanks !!!
@jbsdiytv Ай бұрын
Thank you. Thanks for watching. Let me know if you have any other questions
@tarasdsu Ай бұрын
This was super helpful, thank you!
@jbsdiytv Ай бұрын
Yes ma’me not a problem at all. The app has been updated so you can watch the shorts to get you up to date. Feel free to ask any other questions you may have
@paulmaestas741 Ай бұрын
Why can’t I just put what time my smart plug pro comes on and what time it turns off? why isnt it that simple?
@jbsdiytv Ай бұрын
You can. Under device, go to the main page where you see color, scenes and diy. It will be at the top of the screen. Says timer
@paulmaestas741 Ай бұрын
@@jbsdiytv I got that far and hit timer it asks me what time I want it to come on. How do I tell it when to turn off?
@jbsdiytv Ай бұрын
@paulmaestas741 there is four rows. You will only need the top two. Both need to be highlighted blue to on. This activates those timers in the row. Then top one should be your on time and below that one is your off time
@paulmaestas741 Ай бұрын
@@jbsdiytv right on you fixed my problem I thought the 1 row would have an off as well but I get it now you are so appreciated thank you!
@jbsdiytv Ай бұрын
@paulmaestas741 yes sir, not a problem at all👍 thanks for the support
@andyvillarreal2844 2 ай бұрын
How do I set up Alexa to set my lights to diy scenes? Is it possible?
@jbsdiytv 2 ай бұрын
facebook.com/jb.diytv?mibextid=LQQJ4d contact me here so I can show you
@markwright5173 2 ай бұрын
Why do my lights always turn on blue
@jbsdiytv 2 ай бұрын
You may have a schedule or a dreamview set up that overrides what you really want to see. It’s difficult to say what you really have without seeing what you have. If you would like you can reach me at my facebook or instagram to share your images. Links are at the top of the channel
@Greybic 2 ай бұрын
What clips do you use to fasten the lights? Govee doesn't provide nearly enough unfortunately and am having some problems with a couple lights that I just installed recently, thank you!
@jbsdiytv 2 ай бұрын
Yes not a problem. Thank you for your support. Yes they don’t send enough. Here is the link amzn.to/3TbQMmr If those are not a available then you can try here but they take a little longer to come in kzbin.infoiwZyyI3RXUw?si=dYF4As39nTNE6kax
@jbsdiytv 2 ай бұрын
Just remember the non pros has 12 lights in a strand so you would need enough for 72 lights in a 100ft kit. The pros have 10 lights in a strand so in a 100ft kit you would need 60 as for examples
@Greybic 2 ай бұрын
@@jbsdiytv thank you kindly!
@jbsdiytv 2 ай бұрын
@Greybic your welcome 👍
@akashsinha1619 2 ай бұрын
How much do you charge for a 150ft installation?
@jbsdiytv 2 ай бұрын
Every house has different peeks and jumps. We have been running $1000-$1500 during the offseason but that’s just a rough estimate guess
@lucklessrain857 2 ай бұрын
I have the same model rgbic lights but I connect connect them both?
@jbsdiytv 2 ай бұрын
Do you have the latest app update? Also, make sure your on 2ghz and not 5ghz
@TheJay1976 2 ай бұрын
This app gives me a headache 😂
@jbsdiytv 2 ай бұрын
😂 🤭 even more so now that the app has been updated recently. Everyone was getting the hang of it
@TheJay1976 2 ай бұрын
@@jbsdiytvI would just gifted two floor lamps and I'm so lost. Still trying to figure out how to get the 1 remote to control both lights if that's possible
@jbsdiytv 2 ай бұрын
Yes, I can help. You can group both those lamps. Go to Home, the group near the bottom, then hit the plus button. Same-model group
@jbsdiytv 2 ай бұрын
Add both devices and hit the yellow check mark
@TheJay1976 2 ай бұрын
@@jbsdiytv I will definitely give it a try Later Thanks!
@chriskieffer7094 2 ай бұрын
lol your snapshot list looks just like mine: test 1/2/3, “recent holiday” attempts. Oi vey.
@jbsdiytv 2 ай бұрын
🏆🤟
@johnphillips3526 2 ай бұрын
Just what I needed!
@jbsdiytv 2 ай бұрын
Thank you for watching. I have a ton of questions on this so it was time for a detailed tutorial video
@maryclark8994 3 ай бұрын
Thanks! I have 5 stands up on the house and need to cut 5 of the lights. Does that mean I still change the settings to 6 strands?currently is says I have 5
@jbsdiytv 3 ай бұрын
No problem. If you have 5 up and will cut the last strand that will be say 4 1/2 so it stays at 5 segments so it reads the cut strand
@maryclark8994 3 ай бұрын
@@jbsdiytv ok it will stay at 5! Crossing my fingers I’m not S-O-L lol
@jbsdiytv 3 ай бұрын
@maryclark8994 😁🫣 jk you’ll be fine. I’ve done a total of about 70installs to date. Just don’t try splicing when the power is on and like I said make sure you don’t have any copper strands touching each other. Make a clean cut. If you have any issues press and hold the reset button for 5seconds and watch all strands flash white
@TimReyer-ut5jh 3 ай бұрын
I live in Florida with a simple install of 250 feet or so it’s like going around the brim of a hat. I’m going all the way around the house so I’ll need 2 kits. I’m starting from and outlet behind my house and going both ways to meet in the middle. Will I have a problem getting them to work sequence if I do this or does the app take care out it during setup? I see through you video how to group more than one controller which I will have to do ,but i just wanted to know if it’s is possible to meet in the middle. Thanks
@jbsdiytv 3 ай бұрын
If you install your two separate systems working them to the middle like that it won’t be a problem when you make your own DIY’s because you can change them to clockwise to counterclockwise so it will fix itself then. Now in the Govee presets you can’t change directions only speeds for some presets. Accent spot lighting won’t affect anything. If possible, always try and keep the install in one direction so they all stream the same. Pro lights are the way to go. Hope this answers your question
@TimReyer-ut5jh 3 ай бұрын
Thanks so you think I’ll have problems with the preset scenes? They won’t flow correctly?
@jbsdiytv 3 ай бұрын
Some scenes will be hard to tell but you’ll notice it in some of the slower ones. You’ll see a break in where it starts. So if it’s in the side of the house. Both sides and back will be different to the front. Good dry run would be best at night. Lay like 3 strands going one way and 3 the other way at point A. Then connect the devices there at point A and then select a scene for each device in the app. See their directions go away from each other. Then group them in the app and then set the same scene again while they are grouped and you’ll see the stream do the same as before. Grouping has them respond as one but not their direction. Grouping helps to picking scenes without going to each device every time. Good luck
@timothyreyer4753 3 ай бұрын
Thank you I’m going to do just that. I figured if I experiment before I put them up I’ll know better. As for the pro version I would have, but I already bought these around Christmas time and still haven’t put them up. I’m already vested in these. Again thanks for the help.
@jbsdiytv 3 ай бұрын
@@timothyreyer4753 something I would like to add when it comes to the non pro lights. The non-pro lights, it uses three colors to make white. So if you install from left to right, then you will cast a light of green tint and right to left., you install you cast a purple tint. @HandyDadTV has clarified this on his video so you would need to take that inconsideration on how you would install your lights. Take a look at the video below. 👇 kzbin.info/www/bejne/nqGTXoCbmNGtrJIsi=uBpo4afWppRfQ_PT time stamp about nine :27
@maryclark8994 3 ай бұрын
Hi is this the reg permanent lights? Because that’s the ones I have and I have a section I need to cut but my husband said if the lights don’t work after I cut them that I am s-o-l to get him to replace them lol
@jbsdiytv 3 ай бұрын
lol I tell that to my wife sometimes (s-o-l). Yes these are the non pros. There has been some changes since this video. So you can cut how ever many light you need to cut off but in the segment settings you still need to set it as a full segment to work. Example, you need 7 1/2 strands, the segments need to say 8. Before you seal it, make sure no copper bristles touch one another. Seal the cut strands like this kzbin.infoaMxgmO_StUI?si=tC7YoVNotxT96xGr Let me know if you have any other questions
@maryclark8994 3 ай бұрын
@@jbsdiytv not sure what you mean about segments. I have 5 lights that are just hanging lol If you mean, segments how many strands of lights I have a total of five
@jbsdiytv 3 ай бұрын
@maryclark8994 segments are strands. I replied with a video just recently
@Riverlee74 3 ай бұрын
I have a question for you I’m trying to figure out how to make it come on at night and turn off in the morning. Is that possible or do I just have to set a timer lol thank you
@Riverlee74 3 ай бұрын
You deserve so many subscribers. Thank you so much for your time and your help for video.
@jbsdiytv 3 ай бұрын
Thank you so much for the awesome comment. If you need help with anything else just let me know👍👌
@Riverlee74 3 ай бұрын
So I try to follow your steps for the timer and I put it on for 8 PM turn off at 6 AM as you did, but it doesn’t seem to be working. Is there not a dusk to dawn or could I plug this into a dust to dawn outlet?
@jbsdiytv 3 ай бұрын
@@Riverlee74 I’m sorry, I had a hard time finding your notifications from this weekend. Weird. If your looking for a simple timer you can go to the device home page and that orange bar that says timer is for an on time and off time. Make sure you delete all automation timers if using the basic device timer. Option two, you can set an automation timer and in that one you can pick certain scenes, your DIY’s or user DIY’s. If you use an automation timer, make sure your basic timers are set to off. If you use a personal device timer it will power the whole system down and you won’t be able to control it.
@clintcornett79 3 ай бұрын
I just bought a pack of the 4 light bulbs from Govee. And was able to set them up through the app the issue is I want someone else to access the lights on their phone . Do you have to have 2 separate accounts for the bulbs ? We were able to add them on both phones but would quit working and disappear??
@jbsdiytv 3 ай бұрын
No sir, all you have to do is give them the email and password you set up an Govee account at the beginning and they can control it as well.
@jbsdiytv 3 ай бұрын
Did you hold down the power button down until they blink. I think the instructions said 5secs. Once they blink you can then add the device using the plus symbol 1:31