Gree mini split Installation Guide

This video demonstrates the steps required to install your Gree mini-split system. Please keep in mind that a certified HVAC technician should install any HVAC system. To purchase your Gree system or equipment, visit hvacdirect.com/...
Join us on social
Facebook - / hvacdirect
Instagram - / hvacdirectonline
Twitter - / hvacdirect

[@ratedrHXC]

Why does my unit leak water from the ribbed hose drain connections Its a garbage design

[@T-P8]

So if only and only qualified installers can install these to whom is this video address to ?

[@ratedrHXC]

These are garbage they mention nothing of the most important process Which is the connections of the water drain as they leak in the walls causing much damage and mold

[@jrcamacho4146]

Base on your explanation l remember

[@GotchaplumberGotchahvac]

Good info.

[@HakeemKhan-tq8sg]

I'm Pakistan AC technician.. good 👍👍👍 y

[@overling1]

`is there a video for changing the indoor blower motor?

[@moisander8858]

No, but replacing the indoor blower motor on any Gree wall-mounted mini split will require the unit to be taken down from the wall

[@pauldamon750]

Do you guys recommend putting any thread sealant on the lineset threads when connecting?

[@HVACdirect]

That's a great question, while that's not something we have seen used during an install, we would recommend checking the manufacturers specifications.

[@moisander8858]

Never use any sealants on copper flare connections, if they are done correctly, they will not leak, but if sealants are used, they can be extremely difficult to open

[@blazetownsend8785]

Nylog is fine, it is a basically refined refrigerant oil that assists in making a clean connection for flared fittings. If any gets inside the system it wont cause issues.

[@marjoeguinto544]

Hello sir what is the problem after stall the unit there is 2 line blink

[@marjoeguinto544]

Hi