Greenhouse Assembly & Restoration | Aluminium 6x8

[@GrowWithKit]

Hi everyone, I did a separate video to show you how to cut & fit the glass. Fitting New Greenhouse Glass & Cutting Glass to size kzbin.info/www/bejne/fmaapYGDec6YfKs

[@unifynormal9949]

I just rescued a very similar 6x8 from a house that was scheduled to be torn down. Luckily the greenhouse was out of harm's way but I still had to get it off the lot sooner than later. I pretreated all the nuts and bolts overnight with penetrating oil to break any rust. I had to drill out a few stubborn bolts but that went quickly. The screws used to anchor the greenhouse to the foundation ruined three bits. They were very rusty but reacted like stainless. My titanium bits didn't make a dent! Thanks to your vid I was able to break the house down with the four sides intact. Before breaking it down I marked all the pieces with numbers or symbols to make sure that they will go back together properly. Sadly on the last side (door side) the base rail was completely rusted and fell apart. I have a plan for repair and it should be fine. Mine has fiberglas panels which are intact although slightly yellowed. They should work for now but I'll watch your glass vid for future reference in case I decide to upgrade :)

[@COLTONRYAN749189]

best instructional video by far

[@GrowWithKit]

Thanks 😊

[@bjornyesterday887]

You are a star. This was about the fifth vjdeo I found after I was given a greenhouse which I dismantled without any thought of getting it back together Looking at the pile of filthy aluminium spars in my garden I thought this is a mistake, but you saved the day with the construction manual download. Like you I hadn't noticed the embossed part numbers so when my replacement clips and bolts arrive, rebuilding should take about 5 hours less than working blind. It is a Halls Greenhouse if anyone else is interested. I am now a subscriber.

[@GrowWithKit]

Thank you Bjorn. That’s great I’m glad you found it helpful. Good luck 🌱🌱😊🌱🌱

[@GarethIzCool]

Nice job, that looked like a lot of hard work! Now you have a green house to be proud of and you kept it from ending up in landfill! Can’t wait to see what you manage to grow in it :)

[@GrowWithKit]

Thanks Gareth, it was hard work but enjoyable. Can’t wait to get growing, I’m sure I’ll fill it up soon. Hope your doing great. 🌱🌱🙂🌱🌱

[@simonsouter2375]

Nicely put together video!

[@GrowWithKit]

Thank you 😊

[@frugalfifer]

Thanks for taking the time to do this video. I’m getting a freebie 8x6 greenhouse this weekend and you’ve helped make it seem achievable. Could never afford a new one 🤞🏻mine turns out as well as yours.

[@GrowWithKit]

That’s great thank you. Good luck 🤞🏻

[@greenz190]

Nice video 👍Where abouts did you find the model/brand of greenhouse to get the instructions? I picked up a second hand one like yours but it was already dismantled so i hqve no clue how it came apart! can't seem locate anything to ID it for the instruction manual. Slowly realising it'll be a nightmare without it!😂

[@ronaldandsusanshaws-growing]

Hi Kit, I think you did really well with that freebie greenhouse it looks great 👍👍👍, Take care and I'll catch you on the next one

[@GrowWithKit]

Thanks Ronald, it’ll be full soon 😂, all the best mate. 🌱🌱🙂🌱🌱

[@nguyetpham7695]

Wow..impressive Kit..👏👏👏

[@GrowWithKit]

Thank you 🌱🌱🙂🌱🌱

[@katv1982]

Great greenhouse, you did well getting it up 😀 I see the kitty and dogs had an appearance as well 🤭❤️🌱🌱

[@GrowWithKit]

Haha yeah they snuck in there, thank you Kat 🌱🌱🙂🌱🌱

[@michaelsplot]

Great job Kit all the best

[@GrowWithKit]

Thanks Michael 🌱🌱🙂🌱🌱

[@allotmental.]

Fist!! Great job, that'll come in handy 👍

[@GrowWithKit]

Thanks mate it’ll be full soon 😂

[@nickflynn666]

The steel nuts won't go rusty but they will corrode the aluminum frame by galvanic corrosion. If you can't find aluminium nuts then use some of the black tape you have there so you don't have steel touching aluminium.

[@GrowWithKit]

Didn’t know that, thanks

[@maureen3621]

Some of the glass in my greenhouse was broken over time so I replaced them with polycarbonate panels. The only downside is that they have to be well secured otherwise the winter storms will blow them out.

[@GrowWithKit]

Yeah I’m not keen on poly panels but they are cheaper than glass.

[@alicelight2633]

Just feed back from some who has never done something like this before, it would of been helpful to be shown bolts, the size, what tool used, what the glass clips looks like and how the work

[@GrowWithKit]

I know, it’s the first one I’ve done also & I didn’t really think the video through as a how to. Next time I do one I’ll show more details.

[@DawnBenjamin]

Hay. What about the installation of the window. I'm having difficulties getting the window to fit and work

[@GrowWithKit]

Hi sorry this wasn’t really meant as a tutorial but I’ll try get a more in depth video up soon.

[@carlyfischer1425]

Hi what greenhouse is this, I'm sure this is the exact one we picked up last year, were finally putting it together but no manual and after an hour of confusion we walked away

[@GrowWithKit]

Hi, I’m not sure what make it is, I found the manual by chance after googling. Don’t give up it’s pretty straightforward once you get the hang of it.

[@beckyhaywood9361]

How did you get the manual? My partner and I just got a free greenhouse which we are restoring. It's a smaller version of yours but otherwise exactly the same. Thanks

[@GrowWithKit]

Just googled greenhouse instructions, was the first one that I came across.

[@ernestmcdowell3251]

hi were did you download the plans for your greenhouse

[@GrowWithKit]

Hi, sorry I didn’t take note of the website but I just googled greenhouse instructions and it came up.

[@michaelmizzi7459]

I have a green house 12x8 feet like the one shown in the video. Can anyone show me how to fit the lock for the sliding door please

[@GrowWithKit]

Lock? Mine doesn’t have a lock.

[@raymondgaray2008]

Where can we download the instructions manual? Thanks.

[@GrowWithKit]

I just googled 6x8 greenhouse instructions and it was the first one I came across.

[@albertopalko5547]

What is the make of greenhouse and can you provide a link to the instructions

[@GrowWithKit]

I’ll try and find out and I’ll put the link in the description.