Huben K1 - How to install pressure gauge

Detailed instructions how to install Huben's aftermarket pressure gauge in Huben K1 airgun.

[@franckbecanfa1613]

Thanks Greg for these wise advises. Thinking of getting a gen5 huben k1 and your advises are so usefull. Peace

[@arthurnavarraiii605]

Thanks, Gregor! My guage rotated by itself for some unknown reason. Now I know how to fix it.

[@henrymoreland8719]

Good to see you Gregor, I feared you had given up on us.

[@gregorkamensek3923]

No worries there :)

[@IvansBobrovs]

You do not think that you can change the silencer? Or add an additional silencer through the adapter? What options have you tried? Спасибо.

[@gregorkamensek3923]

I haven't tried anything, personally, i think the gun in very quiet especially when you consider the power and thin shroud. Also, silencers are illegal here. I have seen a lot of people adding suppressors via adapter 1/2" thread...

[@johnb5519]

I wish we had the freedom to be able to have those here.

[@theGermanPrintingNerd]

great Channel Gregor lot of information :-)) Damn wish I could get a Bullpup or something like the FX extrem or Priest but I am Retired , alone , no Family and only have about 200 Euros each month to live from :-(

[@MattSeals]

I benefit from perusing your webvideos. Thanks for your time!

[@W1k1n6Hr]

Genijalac

[@aerialshootwonderboy919]

and by the way.. how do u compare huben to LCS SK-19 ? what i only know is sk19 has full auto .but i preffer the power and accurate and the longest range . thank u greg for reply...

[@thesniper-hunter]

Hello friend, I would like to know where I can get that manometer for the hub1, ​​thank you

[@gregorkamensek3923]

Try the distributors. If you are form USA, you can try AoA, Airguns4 patriots, Joe Brancato,... In Europe, you can get it here: www.balistas.com/regulators//quickfill-connection-with-manometer-for-huben/

[@mariajesushenscaro3321]

good video my question is from the edgun which is more presicion the r5 long or the super long in lime 30 thanks gregor kamasek

[@gregorkamensek3923]

I tried the "long" only in .25 cal but I would say that the accuracy is about the same, super long only has better efficiency and shot count...

[@afigueroa8853]

Hey Greg thanks for that video is very helpful. I have a question. I got a slug stuck in the magazine so I disassembled the K1 G5 and I strip the screw that holds the barrel in place. Screw number 16 on the diagram . Is there a way I can replace them? I try the huben website and it doesn't work. Any advice will be appreciated thanks.

[@gregorkamensek3923]

I assume you are talking about one of two M3 screws that hold the barrel assembly attached to the breech. If so, it is a standard M3 screw (not so standard in US but you should still be able to get it). If it some other screw, then let me know and I will help you as best I can.

[@johnkaspers4612]

Hey Gregor! nice video's ive seen them all of the huben now. 1 question i baught a huben k1 black trigger etc.. i think gen 2 but is there something outside you can see what Gen it is? . serial number : 23K1222017B0020 thnx!!

[@Osmar__Sosa]

Hola, Cual es el diámetro externo he interior del depósito de aire?

[@hadibakalm3516]

How much bar for jsb 18.13 make about 950 fps? 120 - 110 bar enough for jsb 18.13

[@mariajesushenscaro3321]

Gracias

[@jammo2z]

Gregory, I have a.25 Huben and recently the pellet magazine stopped advancing after taking a shot. The gun fires fine but I need to advance to the next shot by turning the magazine. Any idea how I can fix this, thanks in advance for the info.

[@badboyrick3520]

Hey .. How high is the regulatory pressure? under 100 bar, that can be the reason that. Greetings Rick

[@superjungernaut]

Hi Gregor, question not related to the Huben gauge, do you know how to replace the air gauge on a Hatsan Gladius air tube and what size is the air gauge thread. I was hoping to replace the original gauge with the Edgun digital gauge. I believe the tube is the same as the one used in the BT65 you reviewed in the past.

[@gregorkamensek3923]

Hmm, if I remember correctly, the gauge on my BT cylinder is not removable, but it might be on the newer series... so I cannot help you with your question.

[@henrymoreland8719]

WE (especially the royal we) are missing your input/output Gregor.@@gregorkamensek3923

[@hb6339]

Hi , thank's for this video , what's the scope that you can recomend for my k1 , to know I am a fan of long distance shooting .

[@gregorkamensek3923]

It is really hard to recommend but it all comes down to amount you are willing to spend. It also depends on you shooting type / style. I would suggest watching some reviews that are honest and not sponsored by the manufacturers... that is the only right way to decide.

[@hb6339]

@@gregorkamensek3923 thanks

[@kh8655]

Sorry if this is a dumb question, I'm newer to airguns, but what's the purpose of the aftermarket pressure gauge if the receiver already has one on it?

[@gregorkamensek3923]

The received gauge is showing regulated pressure, so you don't know how many shots you have left (how much air you have left)...

[@hadibakalm3516]

How much regulater's bar protect 100joul with 35 grain pellets ??

[@gregorkamensek3923]

About 170 + is enough if the pellets have low friction in the barrel (this especially applies to slugs)

[@zacharymathews8781]

Hey Greg ,,, I have a question , just put new regulator in gun when I went to go fill the gun I cannot get air into the back of the gun. The gauge does not work and it makes a popping sound. How can I fix this problem?

[@gregorkamensek3923]

Not sure what could be the problem, the only thing that comes to mind is if you maybe did not install the reg. correctly? If you replaced the whole reg. including the aluminium part that threads one side to the cylinder and the other to the plenum, you may have installed in the wrong way (the threads on the plenum side are the same as on the cylinder side...)

[@uwekessner7394]

Gregor very nice Huben K1 video,s thanks for all your information bought me on to day 2019 type , it was very educational to watch all your Huben K1 videos, but why don't you take the shrout off 10x faster to place the gauge unit, and also there a lot of different Gauge end cap,s mine has two little springs to hold it in place, screw thread is better

[@gregorkamensek3923]

Yes, I have heard that there will be different versions

[@GoranSkular]

Hi Gregor, ja ne mogu niti napuniti svoj k1.. u default cap ne mogu ugurati quick adapter pipak da treći gumeni oring uđe unutra.. možda su mi isporučili krivi ili ne znam kako ga ugurati. Stavio bi fotku da mogu u komentar.. mali pipak uđe u quick fill connector, a druga strana ima dva gumena uža oringa, pa jedan deblji. U pušku mi uđu ova dva tanja, ali deblji ne ide.. naravno me mogu napuniti ništa. Može savjet koji adapter i gdje kupiti? Hvala puno

[@gregorkamensek3923]

Pozdrav. Več sam vidio ovaj post na AGN. Treći velik oring neide unutro, to je normalno. Problem je da ima huben greško kot fill nipple... problem je da je prekratak. Znam da nemaš boce ali pokušaj na silu gurati fill probe in quick fill dok filaš / pumpaš. To pomogne meni... Možeš o nekoga zamoliti da ti napravi novi adapter ili još bolje direktni adapter bez fill quilc fill adaptera... Još jedna opcija je da staviš dodatan oring u fill foster fitting... ali treba biti malo manji nego originalan.

[@styenli3217]

Hi ! Tell me, what do you grease bullets with ? In Russia we have oil ---- beeswax + paraffin from a candle + motor oil !

[@gregorkamensek3923]

Hi. I generally do not grease the bullets at all. Sometimes I spray some silicon spray just to prevent the corrosion.

[@styenli3217]

@@gregorkamensek3923 Thanks for the reply

[@WaschyNumber1]

Is it possible to put a digital gauge on it, becourse they are know some reasonable priced ones on the market, but they have threads like m10, 1/8bsp and 1/8npt.

[@gregorkamensek3923]

It will not fit unless if any manufacturer make a dedicated gauge for K1. I am not aware of any product like that.

[@carlosvarela6719]

hello Gregor, just unscrewed that screw, emptied the entire deposit, is not it necessary to do it from the regulator? Gracias

[@gregorkamensek3923]

No, if you emptied it with the screw, there is no need to do it with the regulator.

[@carlosvarela6719]

@@gregorkamensek3923 thank¡¡¡¡¡¡

[@carlosvarela6719]

hello Gregor, the plastic half moon that leads between the charger and the barrel, version one of huben also bring it¿ thank¡¡¡¡¡

[@gregorkamensek3923]

I don't understand the question.

[@gediminasjaramaitis6353]

Where Huben k1 last generation in 5.5 caliber could be found in Europe? In any store it is out of stock. Also I'm not able to find any contacts of Huben factory. Could you help me please? How can I write you private message?

[@gregorkamensek3923]

Hi. I noticed that Huben page is down at the moment. You have a few distributors in Europe, so you can contact them and ask about when they will be back in stock. You can send me a private massage or give me you contact.

[@pedrogastiroga3975]

You can get for sale and shipping to Chile?

[@gregorkamensek3923]

Try contacting www.hubenairguns.shop/

[@gogle]

much easier if you remove the shrouded?

[@gregorkamensek3923]

Yes, it is easier, but then you need too loosen the clamps and then realign the position of the clamps, trigger,....

[@henrymoreland8719]

Hello Gregor, I hope your are keeping well?. I have been informed by a Dutch dealership (no names no pack drill) that Huben "will not be able to produce any guns for 6 months due to production problems" , have you heard anything along those lines?, thanks.

[@gregorkamensek3923]

I was told that Huben will start to manufacture all parts of K1 them self and I assume that might be the reason for the manufacturing delays , but I do not know anything about the actual time it will be delayed.

[@henrymoreland8719]

@@gregorkamensek3923 I receive an email from them yesterday (I wont cut and paste in respect to their privacy ) it stated among other things " a few months for testing" newly manufactured parts, so your assumption is correct. I wait, impatiently. How are you keeping?..

[@gregorkamensek3923]

@@henrymoreland8719 I am good, just don't have as much time as I would like for the channel...

[@aerialshootwonderboy919]

hello greg hows ur days.hope u doin good. im from Philippines.. call me rob. im about to plan buying huben semi auto. but i heard that they have each version ... 1 2 3 4 5? am i right? so anyway what version is best .22 cal. .. if ever they have big diffrent then i will choose the better one. im am more on hunting ..i preffer long range ang accurate. if its only same power same accurate ang long range then no big deal. or maybe there's a different in feature? so can u help me suggest which one is better. is it the same handpump to use on some other pcp airgun outhere? thank u for reply i wait for ur opinion. tkaecare friend.

[@gregorkamensek3923]

Hi. The differences are not huge, you want to get at least version 2 or newer as the version 1 had some issues with accuracy (shape of the forcing cone).

[@hadibakalm3516]

I wan to buy semi auto pcp.. huben k1 or evanix max air which one best..

[@gregorkamensek3923]

I would go with Huben.

[@antj211]

Bro my gauge does not just unscrew as simple as you made it seem I wish you had an updated 2023 model

[@gregorkamensek3923]

Yeah, this is quite an old video. But I am not sure what they made different... Or is it just screwed on very tightly? I assume you have all the air out? Sometimes if the regulator is set to relatively high pressure, it will not pass all the air out. Try to turn it down once you have the bleed screw out and see if it releases a bit more air.

[@antj211]

@@gregorkamensek3923 You should really get the 2023 version to see all the changes made

[@hadibakalm3516]

Hi. I wil buy this rifle.. can k1 use regulators bar high 200 bar?? İs it dangerous?

[@gregorkamensek3923]

The K1 regulator can go up to 210 bars without any issues or danger, but he K1 performs best and with highest power at about 190 bars.

[@hadibakalm3516]

@@gregorkamensek3923 thnx for your answer

[@orinlevey1190]

Do you know what size the tiny oring behind the gauge is?

[@gregorkamensek3923]

I believe it it 1x1mm

[@orinlevey1190]

@@gregorkamensek3923 Thanks G, i had the gauge for two days when the oring popped out while i was filling it and have not been able to use it since bc i dont have the oring

[@gregorkamensek3923]

@@orinlevey1190 That is unfortunate...

[@henrymoreland8719]

Hello Gregor, I just watched a great review over on mountiansport airguns, Dana was putting a Brocock Commander HP fitted with a (.25) poly barrel through its paces, he had it shooting pellets and slugs well at 55ftlb, the Barrel is 22" (around 560mm), it got me thinking, would this barrel with a little Gregor magic could this work in the Huben .25. To tell the truth, I am still hoping you are SOON to come back and tell us the Huben in .25 shoots just fine slugs and pellets, straight out of the box, please do, soon, thanks.

[@gregorkamensek3923]

Hi. With stock barrel, K1 .25 shoots pellets reasonable well, but it is not that good with slugs I was able to test. I have poly barrel now and it shoots pellets excellent and also slugs quite well but I do need more slugs to properly test.

[@henrymoreland8719]

was the poly barrel easy to obtain and fit (whats easy?, smiley). @@gregorkamensek3923

[@gregorkamensek3923]

@@henrymoreland8719 Machining is required and also bore site with the magazine...

[@henrymoreland8719]

shame that, machining is beyond me, in both the tools and the skill, guess I will have to consider a non Huben future, damn shame. Thanks any way Gregor.@@gregorkamensek3923

[@arielvi7775]

Hi Gregor, Lot of time has passed since the last spoke. I wanted to ask you, if today you had to buy a rifle, which one would you buy ? (regardless of the price). Thank you very much

[@gregorkamensek3923]

Hi. That is a very general question... the tings we desire are what we do not have or even cannot have... So my answer will very biased. In terms of pellet guns, I would get probably FX Crown or Dreamline. For slugs, I would love to try out American Air Arms Slayer... This selection is of course based on the guns I don't have yet... I would never trade in guns like Priest, Huben,...

[@arielvi7775]

@@gregorkamensek3923 Excuse me Gregor, you're right. What I wanted to ask you is..... if you have the option to choose only one weapon between all that sre avsilable in the market,, which one would you choose? Huben, Priest, Fx Impact, Fx Crown, Fx Dreamline,.....? I see a lot of people in KZbin using the Fx Impact with excellents results!!!. Thanks 👍

[@gregorkamensek3923]

@@arielvi7775 Oh, I see. But I will answer this time only for the gun I own as I cannot know if I will like something I do not have. This would probably be Huben K1 .22. But the reason is not accuracy alone (Priest is mora accurate for example), it is physics of operation, form factor (very comfortable), size to power ratio, ....

[@arielvi7775]

@@gregorkamensek3923 Thanks Gregor. I also have a Huben version two 5,5 and I'm very happy with it but I see a lot of videos of the Impact and all its attributes and I'm tempted, hahaha

[@gregorkamensek3923]

@@arielvi7775 I agree. When it comes to accuracy, it is hard to beat Impact. And not you have an option to shoot slugs...

[@robertbeltowski2819]

Hello Gregor from the USA, how can I order one for my K-1....? Thanks Robert hope all is well?

[@gregorkamensek3923]

Hi. Everything is OK on this side of the ocean :) AoA is the distributor for K1 i believe but I did not find it on their web page. I suggest you ask them if the have it. How are you? Your K1 working properly?

[@orinlevey1190]

You can get one from Krazcool air guns, thats where i got mine

[@gregorkamensek3923]

@@orinlevey1190 Thanks for the input :)

[@robertbeltowski2819]

@@orinlevey1190 Thank you I will contact them.

[@robertbeltowski2819]

@@gregorkamensek3923 Every thing is going well over here. The K-1 is still working fingers crossed ha! ha!

[@muhammadkhilji5234]

What is the price of this guage adapter

[@gregorkamensek3923]

In Europe is about 60 eur, so it will probably be about 60 usd in US.

[@orinlevey1190]

@@gregorkamensek3923 I paid $50 from Krazcool

[@henrymoreland8719]

Hello Gregor, after a very long wait the local (to me)powers that be have OKed me to purchase a Huben K1 "self loading" being the cause of much debate, my Question is , when do you intend putting out your very much anticipated .25 update, sorry to be a pain in the ass, but please take it as a complement that YOUR advice/views on the subject are important, many thanks.

[@gregorkamensek3923]

Hi. I have been very busy and have neglected my channel lately, I know... I have experimented with K1 .25 by replacing the barrel. I have actually got very good results with pellets and quite good results with slugs when I replaced the barrel. I will have a video about this but I don't want to promise when as I do not know when I will find the time...

[@henrymoreland8719]

I fully understand, your channel is not your living, thank you for your reply, and the very best of luck to you and yours.@@gregorkamensek3923

[@henrymoreland8719]

Hi Gregor, I decided to go for it buy a .25, SOLD OUT all over (Europe) , NONE till the end of year, several curse words.@@gregorkamensek3923

[@gregorkamensek3923]

@@henrymoreland8719 Yeah, I know how you feel...

[@henrymoreland8719]

@@gregorkamensek3923 I Emailed Huben and Jacky (Huben Jacky?) kindly emailed back, "we recently moved factory and have stopped shipments" or words to that effect.

[@thesniper-hunter]

Hello my friend, I would like to know where I can write to you, email, since I need to buy spare parts for my hub.

[@minghu987]

Hello Gregor can you tell me how to contact you? Thank you🙏

[@gregorkamensek3923]

Contact me through private massage and give me your email...

[@minghu987]

Gregor Kamenšek im077vr

[@minghu987]

Gregor Kamenšek @

[@minghu987]

Gregor Kamenšek icloud

[@minghu987]

Gregor Kamenšek .com

[@styenli3217]

Hello dears ! Gregor - do You like Huben K1 ? I'm from Russia - here it costs a lot of money ! It costs 10 salaries ! For the money you can buy a normal car ! You can ask for video shooting heavy bullet 2.5-3 grams for 50 and 100 meters ? How many shots from the gas station and what speed what bullets ?! Sorry for my English ! )))))

[@gregorkamensek3923]

Hi. I will have more videos with slugs but I do not know when yet. Regarding shot count, you get about 1 magazine from 300 bar fill at about 135 - 140 joules with 48 grain slugs.