Fabricating the Worlds Smallest 100 HP Jet Boat!

[@GrindHardPlumbingCo]

The launch of Jackery brand-new product kicks off at 8pm PDT on #JackeryDay 5/12. Watch the live stream product release worldwide on Jackery official website and social media. www.jackery.com/pages/jackery-day?aff=379

[@FarmerFpv]

They tried to ride with two people in this micro jet boat. 😆 With one person it's going to be awesome if that motor has the power. link to video guys. kzbin.info/www/bejne/n6mplISvgM99Y5Y

[@calholli]

You should really have a little air bag under your seat.. Because these things will beat your spin up. I guess you can at least throw a simple doughnut in your seat. On a jet ski, your legs act as the shock absorbers. In these boats, it's a very painful ride on rough waters.

[@shaynegadsden]

I get sponsorship and love the work you do on these projects but don't BS people about the product, without knowing the exact make and model of the bikes even the cheapest bike at the size of the two larger ones have batteries at least double that of the Jackery 1500 and a quality units about 4x the size mean a full charge might give you 30 minutes ride time per 5 hours at best charge time on the Jackery

[@calholli]

@@shaynegadsden What's your point? He never said that the pack fully charges bikes-- He said "I charged my bike on the way here" -- meaning that it was charging during the short trip over/ also demonstrating that it's portable and has some utility, even without the panels. I don't think he said anything misleading--- he obviously hooked it all up to the panels directly after, showing that it still needed to finish charging; again, which makes it obvious that the pack didn't fully charge the bike during the ride over... Besides, people know how to read the numbers-- they know how big their batteries are, and they will be looking at the size of the pack when they buy it.

[@shaynegadsden]

@@calholli I think you would be surprised many people will just something on the fact they seen it done not actually understand how it works and the panels were on the tiny green bike the new one they pointed could pull over 1kw so the panels might extend the charging 10 minutes before running into issues also he didn't say "I charged my bike on the way here" he said "bikes" while gesturing to all of them again some it couldn't do

[@MaximumSponge]

Once you guys get the jet boat completed, it would be awesome to see you guys meet up with Cleetus and the Boosted Bois for a day on the Florida rivers!

[@dustinmiller7278]

Don't forget Vasily builds

[@thedude7726]

Hell to the yeah *to the yeahh yeahh yeahh*

[@562LBLegend]

And Mr. Blake Wilkey

[@GrindHardPlumbingCo]

That would be cool!

[@seanheavner358]

I wish cleet could get his mini mini jetboat going then y'all could race them lol

[@GrindHardPlumbingCo]

How are we doing on our first boat build so far?

[@brianm4276]

Crushing it as always!

[@DetroitMicroSound]

That liittle thing's gonna be able to do 360's off of 5mph pontoon boat wakes. How do I know? I live in South-East Michigan. 😀 ...Ok, 5mph pontoon boats, might be a TINY, exaggeration. 😄

[@bradbowers]

Before you do that transom seal, lookup the seadoo one! It's easier to retrofit, greaseable, and way smaller!

[@AAs-vb7pv]

Looking amazing so far :)

[@jarleron4788]

It is to small to have the buoyancy for an adult captain and that engine in it etc, IMHO, add a remote control system to it and make the worlds fasted RC jet boat. I've seen a similar build on another channel and it barely stayed a float with an engine half the size with a full sized adult piloting it. I may be wrong it may float just fine with you in it but add remote controls to it anyway, go with a servo steering system and servo throttle and controls so you don't have to add steering or throttle control weight, not to mention the ability to sit back in it and steer it from a more comfortable position, unload it remotely and bring it to the docks remotely.

[@udx-483muddbucket5]

Jackery is the perfect explanation for the energy and production of this shop!! Out of This World!!

[@nickbaddorf2673]

So excited to see this! I LOVE the mini jet boats! Can’t wait to see more!

[@GrindHardPlumbingCo]

This is such a fun build!

[@Randomperson0467]

@@GrindHardPlumbingCo why is it called Grind hard pluming co

[@grahamharder6511]

Mad Genius at work yet again, GHP keeping it fresh with a boat build! Can't wait for the end result, keep up the awesome work and content.

[@thatdonq]

you guys just, never fail... even when you need to paint in the rain, just... making things work. Sending Love From Australia

[@X3R0D3D]

WOOT! glad to see the bimmerUTE out again! and ripping like mad!

[@Pistonreturnspring]

You guys gotta repair the odyssey!! That’s my personal favorite project you guys have done 👍👍

[@GrindHardPlumbingCo]

True!

[@Lucas12v]

Agreed

[@spyder7758]

You guys always do quality work!

[@GrindHardPlumbingCo]

Thanks!

[@GrindHardPlumbingCo]

The BMW UTE is back and better than ever!

[@glenn2343]

is it an e36? if it is what year model is it. looks sick

[@bryduhbikeguy]

Just love the "BeeUte"too.Nice new doo btw.The 'intake'channel looks perfect for setting the engine back.The first 1/3 is just the start of it's pull anyway.With your skills you'll have a perfect tunnel built for the drive in no time.The tank may make a good seat...

[@scooz14]

You're making a lot more work for yourself by making the pump shoe. Look into a tiger shark daytona pump as it will bolt into the hull and be ready to go, and water tight. The design if the shoe has to be correct or it wont be able to pull enough water through and the impeller will cavitate

[@TrevorDennis100]

That sounds like good advice. We know how critical this stuff is from some Finnigan's videos where tiny adjustments made significant changes to his scary as heck Game Over jet boat. He had that up to 130mph after the fine tuning. Making what looked like small changes to the flow of the intake not only made it go faster, but also improved the boat's handling and cured the scary hopping it had been doing. kzbin.info/www/bejne/m53ViXaBi5iIb7M

[@adventuresaimless]

I vote the “BEAMER UTE” needs a “HOON HANDLE”!!!!!!!! Will, them donuts looked fun!!! 🔥🔥🔥

[@DaxtonAnderson]

I wanna see you and the Cleetus Crew do a collab at some point this summer! I'd love to see that beast ripping through the wetlands of Florida!

[@EdwinOlding]

COFFEE OVER LOAD!!!

[@GrindHardPlumbingCo]

☕🤯☕

[@crispy-k]

5:04 I think it would have been nice to mention that you were charging the small bike :) Seems like a nice product though.

[@Harlanmote]

That’s the coolest thing I’ve seen on KZbin in years. Damn I would like to take it for ride. 👍

[@JThyroid]

For the BMW, you could add a few rear facing cameras. My dad has neck problems and can't look over his shoulders. He added a rear view camera near the license plate, and a camera on both side mirrors and set them to monitor his blind spots. He can use the side view mirrors in conjunction with the three small screens in a custom enclosure on the dash right over the instrument cluster to help him see behind him.

[@christopherwedemeyer2993]

You guys always make this old man smile!

[@corporalclegg914]

I love when Ed comes back to the Piston Farm Edwin - how about Evel Knievel’in over things in the Fe2O3 Farm on E-Bike, in gesture to a GHPC milestone? it would be cool to see how many rusty projects (future & ole) you could safely clear. ‘The Girl’ may request The Suit at home, in a perfect N. Idaho world. springtime for GHPC has arrived.

[@theislandsc]

A solution to the engine space issue might be to flip the engine 180* and use a V drive transmission with an overdrive ratio. Another option is make a custom surface drive or out drive. Surface drive would mount further back on the transom. An outdrive would also mount to the transom and eliminates the need for a gear box. Or see what one of these jet stream boats will do with a reenforced transom and/or a miniature Armstrong bracket and a couple of small 2 stroke outboards.

[@brock50pullingvideos]

Will is looking all fresh with the new haircut!!!

[@calvarycustoms6681]

“Coffee Overload”, lol. His new nickname is Tweakin’ Ethan. 😁

[@sarahblue1914]

Hey, I saw a couple of boats like this fly past Fish Hatchery Park on the Applegate River here in Southern Oregon and thought Wow, Neato!! Fun to see one created. 😁

[@bradlepaddle9512]

Before you add the triangles from the hull to the ride plate maybe check with jet stream I only did skis for a little while but extended ride plates always make things more crispy so you probably want that overhang 🤘🤘

[@AmericanGummyBear]

Everytime I watch your show.(watch it on tv accept to comment will pop on the phone) Can not help but think, if there was. "Grind Hard Coffee"... May actually start drinking coffee. 😁

[@Arturro671]

I like the view at 11:14. That Subaru looks NICE.

[@oikkuoek]

V-drive. You can then flip the engine backwards on top of the impellor casing. This should help push the inlet down in the water without being too top heavy. With that, space the whole attachment surface down 1/8" from the front of the inlet, and 1/2 to 5/8 @ the transom. It should have a slight downward angle to keep the nose down. To get a balanced, roomy two-seater out of that hull, hook a variator in that engine, drive the V-drive from that, and V-drive the impellor. The engine can then be balanced for one side seat for straight solo ride.

[@GrindHardShorts]

TOP NOTCH!

[@2koolchris291]

So I’m planning on building a racing mower. I got plenty of mowers to choose parts from. And maybe boat engine swap. Depends on what I find at the swap meet this weekend

[@GrindHardPlumbingCo]

That would be cool!

[@extremecheddarswityomom]

@@GrindHardPlumbingCo you guys should do a collab with Cleetus McFarland. He can help you work out kinks with the leaks. But to up your views, likes, and publicity but most important becomes friends and make Some GREAT and probably the best content EVER. Great content already but combined with Cleetus and a RACETRACK…it would be amazing.

[@blaketundra3216]

Specifically, 100 hp. Another beautiful build, love you guys. ❤

[@paytonholloway9830]

Awesome idea you all!! Really cool projects all around honestly!

[@joelgreyeyes2802]

Hahaaa that's awesome the way he moved the mirror back at 12:46 that was funny

[@xpndblhero5170]

I wanna go play there¡! The electric bikes and the Razors are exactly what I like doing and some of the other stuff looks like it would be a blast.... 😁

[@RM_Garage]

I get exceptionally excited every time you guys have a new upload. STOKED. Love this channel!

[@geoffburrill9850]

That wee boat is going to be soooo cool.

[@daniesalex7073]

Im glad to see you all doing this project,

[@WATCHING-247]

That thing is gonna be CRAZY!

[@briank1671]

great thanks to all your sponsorships, They gonna charge me for the parts they giving you for the build

[@JustLocal]

Every Chanel is so commercial now! You would do this on a much smaller scale, because you love it!

[@CLCIII]

Gettin There!

[@GrindHardPlumbingCo]

Yes!

[@Worldofelectronics1]

It would be awesome to see you focus more on the jet boat than all the other stuff

[@davidheitman7004]

the time you spent on the bottom . is the point! nice!

[@kylehoy4104]

Do a vid with CLEETUS McFarland when its finished, he'd love the jet boat and you'll get the exposure you deserve! keep up the amazing inventions and love the vibes!

[@reddog543211]

always amazing at grind hard plumping compound

[@andrewbean5163]

Dope music this episode!!!! love the beats!

[@BigGaryYT]

I love your channel guys i have always wanted to make stuff like thid but have never had the equipment to make stuff or even the space to do it at. I loev the stuff you make its really cool especially the jet boat your making in the video its amazing what a little hard work and time can do

[@GrindHardPlumbingCo]

You can do it!

[@russelljohns5572]

bit of a tip when working under a vehicle outside, get a big cardboard box (like from a fridge, etc) and put it on the ground (like flattened), it will be easy to slide around on and it's clean and dry and warm (er than the ground) and it will soak up spillages and can be reused and disposed of easy (burnt maybe)

[@gonun69]

You could build some knee pads in the boat like some kajaks have. This will help a lot with stability one this awesome thing is on the water.

[@lsucody3687]

Do a Blake wilkey style off-road mini trailer with long travel king shocks!!! Tow behind any power wheels

[@taylorwatterson]

You guys are amazing

[@cup0fjoe_788]

IDk much about boats, fabrication, and all that jazz, but do I have a too crazy of an imagination to have two jet ski motors mounted into that tiny boat

[@prodbypiro]

Can't wait for the new garage to start that'll be so cool to see progress

[@cheeseymccheese7249]

12:47 i like how he adjusts the side fake mirror lol

[@LongliveJP]

Dude u gotta build a mini trailer for it and pull it behind one of the power wheels builds, thatd be sick

[@lachlanorford8928]

Pretty sure there gonna tow it with the Barbie powerwheel

[@GrindHardPlumbingCo]

For sure!

[@306GokartsCustomBuilds]

Congratulations on shop space ..lo ung these long details episodes 👍

[@highlightzilla9581]

Get it wrapped things gonna be one sweet boat

[@osamabentrappin4102]

That's crazyyy yall still going Hard

[@Kindaquick1]

Coolest coffee ad ever. What kind do you drink?

[@aserta]

Honestly, on this one, i would've cut more than the hole required, built up the stuff on the actual motor/pump/nozzle assembled, then offered it up to the boat and welded that in place in the larger hole. Sometimes, just take the easy way out.

[@krispychiken]

LOVE THE NEW INTRO!!!!!

[@AnN-py2em]

Lol omg, I love his “plenty of space” when is comes to vehicles.

[@JacksOutDoors.]

Sup boys for sure meet up with Cletus that would be so sick

[@GoodSirFry]

My 3 year old is always asking if you guys made another video yet. You guys would make a great do it yourself garage show for kids

[@lizzw4216]

So much dirt haha can’t wait to see this boat go

[@dukie1616]

Love is a very powerful word, so, I’m just going to say I like, no, really really like the Colonel and really really like seeing it sent preferably not bent, so please please keep hitting that lit little wedge. Preferably in 2WD😂

[@Jeeplee_rc]

They absolutely make off-road creepers!

[@jackc3167]

Jackery day is on my birthday 😳😳

[@darploin5071]

Another thing about 6" from the bow I would Weld in another piece of aluminum water tight and that could be a crash bulkhead if you put a hatch in a very tip you can use that as a anchor locker or just a storage locker and that way you can get yourself a boat certificate and registration to take it out on the water and you'll have 3 water tight compartments in the boat

[@mxsx25]

Curious to see how well that stock exhaust fits in there boyssss

[@Hellsong89]

Crabs the grinder "seems to fit real well!.. only thing is to do it so dimensions dont chance from stock, since this is two stroke and exhaust is extremely important to get right.

[@danjim7056]

Man that saw in the beginning sounds sick!!!

[@GrindHardPlumbingCo]

YESS! haha

[@Throttleoutmedi4]

Good job guys! Brraappp

[@GrindHardPlumbingCo]

SOON

[@cinnamonrollypoly]

"offroad creeper", lol. I like that.

[@MikeOrkid]

This reminds me of that tiny jet boat from police academy 3. It's going to be a ripper!

[@vuyanimagongo2841]

I like how you did all your “fine tuning” with a hammer 😂…very precise

[@FarmerFpv]

C'mon guys, less talky talky more worky worky! 😂 As my dad would say in an Italian accent.

[@mars7786]

Yessssss video with cleetus take all the toys make the giraffe try to fit in things and drive them

[@DoTheThingTheater]

Absolutely loving the chaotic, coffee-fueled behavior

[@shanepatrick2869]

Y’all r awesimeeeeeeeeee

[@Deckie1969]

This boat will be terrifying!!! lol

[@bobbymichelin540]

YES. been waiting for this

[@GrindHardPlumbingCo]

yes!!!

[@Ameritude]

Just sat down at a zips for lunch, going to enjoy this with it

[@GrindHardPlumbingCo]

Heck yeah! Glad we got it out just in time!

[@TheKiltedYaksman1]

You need one of those all-terrain fabric creepers. I think one of the brands is called Magic Creeper.

[@brentheltsley7187]

Seen some other tiny jet boats made and they always run nose heavy. Like “identify as a submarine” jet boat. Keep as much weight to the back, battery, tank, all the weights in the back. Awesome work fellas.

[@frenchiezooted8833]

Gotta have a fishing rod with you at all times. It’s mandatory. 😂

[@swissroll71]

I’m ready for the new shop to Be built

[@GrindHardPlumbingCo]

First test drive video here! kzbin.info/www/bejne/omnEmap6a9yGps0

[@BiGCyCl0n3]

5:47 They have those! It's called a creeper sled. :)

[@BiGCyCl0n3]

I can't remember where I had seen them, but I seen them before.

[@jordanlatta]

I just got my first ever boating club ad when I clicked on this video 🤣🤣🤣

[@jimfilmont3833]

So freakin’ cool! Love all the cool shit you guys do!

[@Chris-cq5dy]

That will be a bad ass boat

[@bricebertelsman7783]

Yes the videos Iv been waiting for

[@alexandersillan8139]

I love Edwin’s idea of cozy is tight for normal people ha ha. I guess compare to the other vehicles it is but yeah, still not a normal cozy

[@handyhippie6548]

i use an old semi truck mudflap for an off road creeper. it's nearly indestructible, fits behind the seat of my truck, keeps me out of the mud/snow/evil goo, and since i found it in a ditch after it fell off of a moving truck, it was free. win/win/win/win!

[@gibsonf06]

definetly meet up with the Cboys!

[@Ponyboy-kl6yr]

Fisher price tug boat ⛴ build , man it’s going to be cool

[@blomie9548]

Put the motor all the way to the front and sit behind it perfect 50/50 weight distribution!

[@Brynnsfishing]

Would be cool to see your trailer with the boat and rooftop on the top

[@shaharsdechen2537]

great stuff!