Clicker Keypad ProgramTo Smart/ learn Button-Type4

How to program your Clicker Universal Wireless Keyless Entry to a garage door opener that has a smart/learn button. Type 4 in the instruction manual. You can download@ gsoverheadsystems.com under garage door openers-sub page, instruction manuals. You will need 1. a 4 digit pin or code 2. opener ID from instruction sheet, & 3. Locate the program button on your opener.

[@RayshellChill]

Your video was the only one who mentioned having to possibly hit the zero two times. So that was a total of three with the zero at end. Then two more. And finally it worked. Omg I’ve been at this for over a hour. And I had to re program my car hand helds’ cuz other videos messed up the garage opener it’s self LOL.

[@jakemalish895]

I watched 5 videos. This was the only one that showed the correct sequence to push in order to successfully program my opener. Thank you.

[@Miya-jp5ko]

Thank you so much!!! I watched countless videos in attempt to reset my garage code. No luck until I came across this video. I’m so grateful for your video. Huge help and you made the directions very easy to understand and follow. You are amazing!!!

[@3tylersmith]

This video probably save me four hours of my life

[@duckiehawk]

I appreciate you guys making this video. Helped me get my keypad programmed again after I accidentally changed the PIN a week ago. This saved me alot of future frustration. Keep up the good work!

[@GetRevitalizedMedSpa]

THe only video that helped me among the 5 I have viewed. Thanks for the clear instructions.

[@navin01985]

Same here

[@willhaskett]

First time ever commenting on a KZbin video... But this was exactly what I was looking for. Inherited a house with this keypad (no Enter button) and this was the only video I could find that gave me ALL of the steps. Finding the Opener ID was critical. THANK YOU!

[@gregcampbell465]

This was by far the most straightforward set of instructions I have ever followed! Thanks, reprogrammed on the 1st try.

[@brandiewilliams8707]

Thank you once I removed the keypad to confirm the model number and searched the internet for the correct manual for the ID# this was a breeze 👌🏽 👌🏽

[@ganbare6]

Just moved into a new home and used this video to reset the keypad code. These instructions were difficult to come by. This video had all the information I need down to the opener ID which I can clearly see options 1-9 by pausing the video. Thank you so much!

[@lbsrfr999]

After trying a dozen times to program this keypad, I figured it was broke and should return. But before I did I decided to remove the battery for a few seconds, replace it and try programming it again. It worked that time.

[@99Mamacita]

After viewing many other videos , trying those others out with no success - this was the only video that worked within one minute!! Thank you so much! You explained it very clearly

[@paulnewman5667]

Thank you Sir!!! This was fantastic to actually see it with you presenting the programming. I’m sure many people may think it’s very easy, but I did this four times without any luck. I’ve done others before many years ago. However, watching you do it made my night not so long.... Thank you!!!!

[@benjamintaylor7487]

It's been said many times already, but THANK YOU for making this video!! I watched SO many other tutorials that just didn't work, and your video worked like a charm. Yours was short, cogent, and hey, it actually worked. Thanks again!!

[@swainscheps]

The instructions I downloaded said that Sears Craftsman with a red/orange button was a type 4. Glad I watched your video and saw it was actually type 2… Also no mention in my instructions of hitting the last button twice during the test…🙄

[@A.C31]

I love YT how to videos, like this one. I can't remember the last time I read the directions to do anything. It's all on You Tube! :)

[@dorisbrown9357]

Thanks to this video, I didnt have to go buy another keypad opener...instructions were spot on...thank you for also showing the opener code page.

[@ThatBoyGhost82]

I know I'm years late but thank you brother I have an over head door opener and I've been trying for over a week with no luck. My instructions didn't say anything about holding *# at the same time. It worked perfectly after this video

[@rollie2531yt]

Thank you for making this video very easy to understand I was able to reprogram my key pad in less then one minute. Awesome job!

[@CGSurge]

I come back to this video every time my remote loses signal. thanks so much for taking the time to make this video!

[@itswhitt3145]

Worked so easily! Even got lucky enough to have my opener on your instruction sheet. Great video. Thank you

[@philcamacho127]

Thank you! I've looked at other vids, and none gave me the correct steps except yours!! 😊

[@A.C31]

Man, the 24 people who gave this video a thumbs down must not be too bright. This is a very good video.

[@Jasonf1399_]

U wot m8

[@MsEmma3662]

Jeff Brown very good the only problem for me was the mounting I put it in upside down and the pad didn't work so now I ave to rekey it

[@47redragon]

Thank you! This video made the reprogramming easy and I had the keypad working in less than 30 seconds

[@danjohnson3860]

Worked perfect. Even obtained my opener ID from sheet shown in demo. Thanks!

[@sue2480]

This worked perfectly for me. Best instructions out there. THANK YOU!

[@putty059]

Your instructions are right on point, Great video!

[@DjRoach313]

My favorite video of all time! Every time my battery dies I have to watch this to reprogram it🤣🤣🤣👊🏽🤟🏽

[@matthewmolina9485]

Thank you 👏🏽 others did not mention pushing "0" button "twice"!

[@BeemerMac3]

You are awesome!! Really appreciate it. Bought a new house and followed your steps. Best how to video ever :)

[@BennyBlaze23]

Finally! Someone that knows what they're doing! Thank you!

[@drewpowers6038]

Best garage programming video I have ever found!!!

[@dorreenclements8774]

Very helpful. I was inputting the code# and then waiting for the light to go out. Then inputting the garage opener code#. Once I watched this I realized I needed to enter the passcode#garage door code# all at once. Thanks so much.

[@crystalramsey5919]

Your video was very clear and helpful! After watching this, my husband and I looked at each other like, DUH! Thank you so much for your help!

[@MrRazor99]

Thank you so much for this video! Especially showing the owners manual with the different numbers for garage door openers.

[@WhalewatchingCapeCod]

Best video I have every seen to reset your keypad garage door. Very clear! Awesome video. Thank you!!!!

[@kengy1991]

I have the new LiftMaster (2011-present) and this was just what I needed. Awesome video!

[@litoloco4fish]

Thank you brother..my mother lost her booklet and I didn't have the code. You showed the codes and I was able to pause it and reprogram her pad...many blessings brother thanks again

[@tylerr2814]

Out of 20 videos this guy was the best one and it actually worked for me

[@carskum5217]

Thanks for the detailed instructions. Exactly what I needed.

[@jackyshaw5761]

I've watched multiple videos and this one helped me with my solution. Thank you for providing all the extra information you are the man!!!

[@scrawls1627]

Thank you for the video. I followed it to reset my keypad and it was "spot-on"!

[@nancyhanley6721]

Thank you thank you thank you. This was great! I was able to reprogram my Clicker keypad using your very clear instructions here. Thanks again.

[@arnulfovasquez7583]

I moved into this condo and never knew I had one. After 5 years and finding this wonderful walkthrough, I finally can use it. No more looking for a lost remote for hours. Thank you sir for the video!

[@jdcalame6714]

Well now you do!

[@lurnfitness572]

Great video! Saved us a replacement trip to the hardware store. Good call holding the company codes up to the camera as well!

[@woofman1962]

Thanks for the video it was a great help took less then a minute!

[@redmapleleaf4617]

Perfect! Thanks a million! Worked EXACTLY as you described!

[@markthill1]

Thank You! Very Helpful. I was also able to read your Sheet to find my opener code. Good stuff

[@jamesmedeiros8160]

Accurate information, audible sound, and the instructions worked for the green button Sears Craftsman also.

[@anngepp8491]

Concise and simple. Perfect! Thanks!

[@RG-gd5tc]

This video has helped me several times over the years! Thank you!!

[@danielgoss5162]

Great and very handy video. Thank you! I've used this several times. Super helpful!!

[@cabowen83]

Awesome!! Thank you so much for posting 👍🏻

[@scotw67]

Worked great! Thanks guys!

[@peterodaro8777]

Thank you so much. Your video solved my problem. Direct to the point. Great. 1. Hold #* together until light stops blinking. 2. Enter four digit code of your own creation for example 1234. 3. Then enter garage machine code (year manufactured dependent) for example 3 follow by #. 4. Next climb ladder and press learn button once and light comes on. 5. Then enter your self created four digit 1234 plus 0 and light blinks or you hear two clicks indication of acceptance of your self created code. Henceforth, press 0 to control movement up and down. All said and done, in future when you come home, just type on your keypad 1234 and 0, bingo, it opens and when existing home through the garage input 1234 and 0 to say bye bye home.

[@jwhillyer]

This video helped me reprogram my wireless keypad that needed to be reformatted. Thank you so much!

[@kitharfiddle]

Excellent! So quick and easy! Thanks mate!

[@philmason2297]

Tried a dozen times to get this thing programmed. Finally looked for a KZbin and had it done in five minutes. THANKS FOR THE GREAT SIMPLE INSTRUCTS!

[@user-os4od9np5r]

I follow the instructions And I just don’t understand why it won’t work and try four times and I told myself I give up ,so told myself let me check you tube and I found you ,Thank you so much for your simple video and my problem is solve it only take me five minutes I see what I am doing wrong . Thank you again

[@garypopkin600]

Thank you…remote now works! Very good tutorial too!

[@genawebb5593]

Thank you so much!!!! Great instructions and it really worked!!!

[@tenthdimension9836]

This is an absolutely perfect video on how to perform this procedure.

[@MACTEPKBACC]

Thank you! You are very helpful!!!

[@zacharysizemore2428]

Worked exactly as you showed! Thank you sir!

[@Mejak5]

Follow this exactly. It works!!! Thank you so much!

[@stevebyrne6606]

Excellent demo and it worked straight away. Thank you.

[@andrewfarley3727]

Great video thanks for posting it. You just made my day.

[@jordanB472]

Excellent level of detail but short and sweet. Thanks!

[@leifp.booger6867]

Great job/video done in five minutes, thank you!

[@gaylonpowell4453]

Great assistance, did have to find my Linear code (1) on you website after that all programming was as instructed!

[@jessicafidalgo2980]

THANK YOU!!!!! My son messed up our code and i could NOT figured out how to fix it. This worked great!

[@MrDakota352]

Omg thank you so much !! I was going crazy because I don’t have enter button on my keypad . All good now yay !!

[@garyg8040]

This is the third time listening to this ,,my father always messes the code up and I have to fix it ,,,strait forward instructions, works 1st time every time

[@Shanon_Patil]

THX!!!! This was well explained, and it worked for me. Keep it up. :D

[@vasilykerov8532]

Great video, however, my keypad was 'forgetting' the code after programming. It turned out that the 9.1 volts it had was not enough. I replaced it with a fresh one (9.8V) and it worked!

[@peterpanico701]

Perfect thank you. Very easy to follow and worked the first time.

[@yankeehank1897]

Thanks for the video! Just passing this along in case anyone else runs into this, but you cannot select a 4-digit pin that begins with "0". The instructions that came with the keypad did not mention this restriction.

[@jamespeelecarey]

Thank you for posting this was very helpful.

[@darrylkallen]

I was freaked out at first that any key was opening and closing the door, and then I realized you have to wait 15 minutes for that functionality to stop. Thank you for the video.

[@dancindavey1515]

Darryl Allen Thanks for that info. He didn’t mention that. Was wondering the same thing.

[@paulkempin9320]

Thanks, now we'll finally use this thing that we bought about 1/2 dozen years ago. The mystery is solved, thanks you Columbo… :-)

[@LeadTherapy71]

Thank you, the sheet I have didn't mention pressing the # key after the code and ID number and I couldn't get it working, will try this tonight - much appreciated.

[@williemoore5145]

Worked as advertised thank you so very much for posting.

[@trinitysolo]

Thank you!!!! I lost my instructions, you rock

[@MrPuneetAgrawal]

Helpful Video! Very Important to know - It has a feature that would let me press any key to open it again for about 30 seconds after closing. I suppose it's meant for those times that you remember you forgot something, just as the door closes. But if yours opens the door after the keypad hasn't been touched in a long time, then it is broken. Doing a hard reset might fix it, but I'd be surprised if it does.

[@navin01985]

Thanks GS overhead...perfect video and can even find door opener type in their website

[@absupplynet]

Put a 'Donate' link on this page. Thank you very much, I just needed to get my overhead up and working and you video made it simple.

[@markphilippsjr]

Extremely helpful, you did the pin and ID sequentially which made the difference the instructions are terrible. Thank you

[@everythinghomerepair1747]

Worked well thak you!

[@bradleywoodle1903]

Absolutely thank you! Worked like a charm!

[@benjaminbernsteinpodcasts]

This procedure worked perfectly. Thank you!

[@bigmig5150]

Thank you so much for adding the link to the remote finally reprogrammed my garage opener

[@jimearl1847]

thank you - second time I had to borrow your wisdom. All the best!

[@DavidRiosTV]

great video tutorial. your website was very helpful to find the manuals.

[@candiscollins3367]

Thank you so much!!! Easy and clear!!! Got it!!!

[@djuban1]

This video helped me out big time tonight. Thank you so much!

[@philvercruysse8804]

Thank you for the help and taking the time to show and tell.

[@rex0370]

Thank you - this was VERY helpful to me today.

[@loosenut1969]

Thank you I have use this numerous times I’ve never commented and what I do is Win you show the cheat sheet with all the codes I just take a screenshot and then I can zoom in and see how that way you don’t even have to go to the website thank you

[@OrionMagus]

The code on the instructions was wrong for my type of garage opener. I just tried them all until I found one that worked. Thanks for the video.

[@travisellis984]

Thanks for the awesome video. Very easy to do with your instructions.