MOZA Mini-MI | New Updated Advanced Calibration Tutorial

Advanced calibration is needed when the Mini-MI runs abnormally such as crazy drift or rotation. please refer to this video to make your gimbal go back to the most perfect working status. Be sure to upgrade the firmware to the latest version before the calibration!
0:12 Before Calibration
0:56 Start the Advanced Calibration
Learn more about MOZA Mini-MI：www.gudsen.com...
Like us on Facebook: / gudsenmoza
Follow us on Instagram: / gudsenmoza
Follow us on Twitter: / gudsentech

[@toyingzt]

Hello moza Please solution, my mini mi dosn't work with my android Bluetooth not conectting with my phone Please solution

[@GudsenMOZA]

We will help you fix it.

[@toyingzt]

@@GudsenMOZA thank's for your respon

[@nemezida0024]

WOOOOOW We use it!

[@TraveloTech]

please help sir. my moza mini mi tracking is not working.. its brand new .calibration completed but the tracking is not working properly. i select subject but the gimbel is up and down continually, what can i do

[@GudsenMOZA]

Hello, don’t worry，please write an email to [e-mail] for professional guidance.

[@majeedthanoor]

I am also facing similar issue.I already contacted with supporting team.I am waiting for their reply.

[@ahmadhusain5429]

I have done it dozens of times but it can't be used yet, please help

[@secretagentx-9908]

sunday chill commentary?

[@christopherrippel2463]

Why is PF & YF blinking?? Once calibrated, and turning on the unit, it come to attention for 5-10 seconds, then dies out with the flashing. Every time! What is wrong???

[@rmmonon5173]

Help! Firstly my setup was unable to do motion time lapse. I was unable to add 9 points to be followed. Later on I updated my firmware and now I am able to add points for motion lapse but Alas! the phone (gimble) is not following the points and remains at the same position.

[@felipeacydc1289]

help... my mini mi 2019 spin out of control after calibration... what im doing wrong?

[@GudsenMOZA]

Hi, did you do the advanced calibration ？

[@abbi6203]

Please help me when i turn on my moza mini mi it's spinning i tried many times calibration and also i updated he firmware i try all calibration but i can't fi it .

[@GudsenMOZA]

Hello, don’t worry，please write an email to [e-mail] for professional guidance.

[@abbi6203]

@@GudsenMOZA sir i send the email.

[@sgcko7]

@@abbi6203 did they respond?

[@ord4studio]

What is the format of the link to broadcast? There is only one rtmp field in the application, where should I write the key?

[@consulenteagrario]

anche nel libretto illustrativo

[@MikeCampbellmc]

I can't get my tilt motor to work so can't even get the rest of this going. I have seen nothing about getting the tilt motor to move - it's locked in place. Am I missing something?

[@GudsenMOZA]

Hello, don’t worry，please write an email to [e-mail] for professional guidance.

[@frankothedrako4774]

Did you ever figure this out I am sick

[@frankothedrako4774]

Suck*

[@liltwistofcaine]

Like fuckin hell it does.

[@chi11estpanda]

Why is this thing designed to have the tilt motor on the left side? Is it so the lens is on the bottom right corner when in landscape mode? I unlocked landscape mode and the app shows right side up so App looks fine, but at the same time everything for my phone is still upside down--notification bar, even when keyboard comes up, etc. I don't know why Samsung didn't think to make Landscape work for both ways 🤦‍♂🤦‍♂Ugh, this was not a problem with my Galaxy S8+ but now with the Galaxy S21 5G, it doesn't have landscape mode when turning the phone clockwise to place the tilt motor on the left and I can't turn the phone around because then the bar is blocking the camera...how bad is it to use the device with the tilt motor on the right??

[@YogeshjadonYj]

Sir My mosa mini gimbal automatically rotated right now he is in warranty. he took Delhi service centre. he told. We shut service center. Mail to company. There have gone 2 times are making crazy

[@BlazshoNikolov]

What the heck is "electrical angle" and to calibrate that? Im stuck with "calibration failed" all day.

[@GudsenMOZA]

Hi there, please reach out to our service center: [e-mail], the team will help you out.

[@KALABAWCANADA]

I am trying to connect to my phone and it keeps saying i need to disconnect Bluetooth from another phone; I only have one phone

[@GudsenMOZA]

Can you please contact our service center for help? [e-mail]

[@pepelochas]

HOla,, mi dispositivo despues de unos segundos "se afloja" y se vuelve a caer.... por que sera???

[@shannonlovgren3359]

I am trying to recalibrate my Mini Mi but it won't connect. I've restarted both the phone and the Mini Mi. I have off-loaded and reloaded the app. Nothing is working and I am frustrated because the mini mi just goes crazy everytime I try to turn it on.... urghhh! I have followed all the steps in this video but never get past the connect to the device because I just get an x next to the selected device instead of "device connected" What can I try next?

[@GudsenMOZA]

Hello, don’t worry，please write an email to [e-mail] for professional guide.

[@filiphurta6776]

My mobile spinning every time when i turn my gimbal on. This tutorial is bad!

[@GudsenMOZA]

Hello, don’t worry，please write an email to [e-mail] for professional guidance.

[@colours.of_life]

Mobile holder portion is heating after 15 minutes of usage and lose the stability control why?

[@GudsenMOZA]

It could be caused by reason of unbalanced setup.

[@happywithdolon]

How to reset calibration, please help me

[@GudsenMOZA]

Hi there, thanks for reaching out to MOZA team, you can contact our service center to help you out, [e-mail], thank you!

[@dafjazz]

On my 3rd use of this Moza Mini-Mi gimbal, it shook violently and threw my cellphone and hit my LCD TV. What if it hit a person?? I would've been sued. Oh yeah, my phone almost broke into pieces too.

[@GudsenMOZA]

If you running some tech issues here, you can contact our tech team to see if they will help you to fix it. Email: [e-mail]

[@ursulaandrea237]

Can i use xiaomi redmi 5 plus?

[@GudsenMOZA]

Yes，sure

[@ursulaandrea237]

@@GudsenMOZA is the software compatible with redmi 5 plus?

[@GudsenMOZA]

The MOZA Genie is compatible with it.

[@dragonsoul3039]

Please help! My mini mi keeps falling asleep and the roll arm is asleep too

[@GudsenMOZA]

Hello，please make sure it is well balanced，and make sure it is the latest firmware.

[@dragonsoul3039]

Gudsen MOZA I’ve done that but still the gimbal falls asleep and the roll arm doesn’t work. I’ve checked motor and it wasn’t burnt or hot

[@jake30966]

Why does mine vibrate when i switch it on even after calibration ?

[@GudsenMOZA]

Hello，please kindly balance the Mini-MI before you switch on.

[@jake30966]

@@GudsenMOZA Hi , Thanks for help it worked it doesn't vibrate now 👍👍👍

[@jake30966]

@@GudsenMOZA mine keeps going into sleep mode and i have to continually press the power button to wake it up and it only lasts for a few seconds then it does it again , is there an easy fix for this ?

[@GudsenMOZA]

@@jake30966 Hello, don’t worry，please write an email to [e-mail] for professional guidance.

[@dragonsoul3039]

Jakeyboy Bond i have the same problem

[@chronicle7138]

This is an incredibly frustrating device to set up. It should not be this difficult to calibrate. I've tried the upgrade about 5 times, each time I can't get pass confirm.

[@GudsenMOZA]

Hello, don’t worry，please write an email to [e-mail] for professional guidance.

[@consulenteagrario]

ma un video italiano fatelo

[@meseendev]

Вылетает при попытке обновления или калибровки . Стедикам крутится как вертолет. Не покупайте продукты @UCHBIF5mblt4W0iPRKzU6qPA​ чтобы не иметь проблем

[@GudsenMOZA]

Is your gimbal facing these issues？You can contact our tech team to help you to fix it. [e-mail]