Guitar tuner does not wind or tighten string | Broken guitar & bass tuning peg repair

Рет қаралды 34,199

Күн бұрын

Пікірлер

@youbeedoob1 4 ай бұрын

Thank you so much. I had no idea that the tuners could be disassembled like this. I feel silly that I have wasted so much money over the years replacing tuners when I could have just repaired them.

@saatvik7035 8 ай бұрын

Thankyou brother, i feel good for the first time in my life after fixing and following your instructions❤

@darthzamy 7 ай бұрын

I followed every step but sadly it didn't work 😢the string just keeps getting loose after a few turns. Looks like a need a new peg. Great video anyway!

@lebgcestmoi8771 3 ай бұрын

Same, I guess the screw needs te be replaced

@anthonyaxtens5849 4 ай бұрын

Thanks, I'm so glad I was able to fix my guitar by following your super clear video! Before I found it, I was fairly close to trashing my guitar 😂

@victorteixeira1433 Ай бұрын

I was already picking up my wallet to send my guitar to a luthier, but watched your video and tried it. Problem solved! Thank you so much for this video!

@chiefersutherland5609 Ай бұрын

Perfect! I fixed it!! ...I'm still going to get a new one but I'm excited I get to keep a backup!!

@Linoleoom Ай бұрын

What do i do if the cap that needs to be removed is made out of metal here, and simple knocking dont get it out.

@Macro-photographer Жыл бұрын

Great vid, i have a german made warwick corvette and my tuner free wheeled, i used your vid to take the tuner apart (great hack getting the cap off) and realised that it wasn’t salvageable as the screw had sheered its thread. But I was able to replace it with another one and replace the cap. Instead of superglue which is a difficult chemical as its made some metals become white and powdered once dry, I used semi permanent thread lock (blue) and that has secured it with no mess and hopefully will be easier to pop the cap off in a few years time… thx again!

@denise8698 7 ай бұрын

Oh my goodness! Thank you for your video! I thought I was going to have to make a 65 mile trip to get this fixed! (I live in a rural part of my state). Your video saved me the time,money and gas to travel. Bless you!

@outermarker5801 Жыл бұрын

Thanks. I think my 20yr old Soundgear peg broke entirely but this is great info how to replace it.

@paxonearth Ай бұрын

Would this work for an enclosed “vintage” top-load tuner?

@meraappaiah1441 7 ай бұрын

Thank you, I resolved my guitar tuning problem by seeing your video, thank you very much

@BrotherBrownMusic 10 ай бұрын

As this will probably also work on guitar tuners, I'll start by saying thank you for a great video and ask what stuff you would use to remove gunk from inside/outside a tuner?

@Wrigglyaudio 10 ай бұрын

Thanks! I have done this same fix on a guitar tuner, so should work if you're having this issue. But hm ... what sort of gunk are we talking?

@BrotherBrownMusic 10 ай бұрын

@@Wrigglyaudio Thank you for quick reply! It's mostly old oil/lube inside and dirt from playing on the outside.

@Wrigglyaudio 10 ай бұрын

@@BrotherBrownMusic Fair warning, I'm totally guessing here. 🤔 But I'd start with something mild, like dish soap and water. Dry it well - maybe even hit it with a hair dryer in case of any leftover water, which maybe could lead to rust depending on the tuner. For stickier oils and glues, I usually have luck with Goo Gone. The bottle I have does leave a light oily film. But it usually makes quick work of tougher gunkier stuff.

@siddhantpoudel6147 2 ай бұрын

Thank you so much broo i was stressing frrr❤

@svi_zine Жыл бұрын

thank you so much this is the exact type of tuner my bass has and i couldn’t find any other videos to fix it

@RodrigoDLM Жыл бұрын

Great, at first I thought mine was broken 😅

@mettalton 27 күн бұрын

for me, the post popped out of the gear and now does not reinsert into the gear no matter what i do. really upsetting

@1ns0mn16c 8 ай бұрын

I need this but for epiphone or gibson sg tuners

@projectmilzock 6 ай бұрын

Is this the same fix for an classical guitar?

@adamfinn3760 Жыл бұрын

Awesome video! Much help, Much thanks!!

@akalamoalkr3 6 ай бұрын

Thx man it work no need to buy a new one❤

@supee8071 10 күн бұрын

one small problem…i can’t (for the life of me) unthread the stem. that thing is fused in there, same as the cap at the back. beginning to wonder if whoever owned my bass last used superglue.

@leemoliam8306 9 ай бұрын

Thank you - fixed in a jiffy

@iCassieeLeighh 11 ай бұрын

Great video ! However my cap just won’t come off, no matter how hard I hit it, nor will the gear actually come out of the main component no matter how hard it pull or twist. Any tips? Or is it time to just buy a replacement tuner alltogether?

@Wrigglyaudio 11 ай бұрын

Thanks! And bummer. 🙁 Maybe it's sealed. (Or maybe someone else watching this will have a tip.) But it's also a good excuse to buy some fancy locking or auto tuners. 🙂

@thereubenator7947 8 ай бұрын

mines not coming off either but theres lots on amazon that are quite cheap

@tikaal 4 ай бұрын

i managed to get mine off by heating it a bit with a blowdryer and hitting it like in this video