GUN Stash Uncovered While Magnet Fishing - Best Day Of Magnet Fishing Ever

Today, we started out at the scrap yard then stopped at a new bridge and were extremely surprised at the treasures we found hiding below us. We found a dump sight for old guns! We also broke our magnet fishing record for most guns found in one day. watch while we have an exciting day of magnet fishing in the rain for all kinds of cool river treasure! #cleanstreammovement
Need a magnet? Check Out Battle Magnets And Use Code "blakecantswim" For 10% Off Your Entire Order!
Battle Magnets- www.battlemagnets.us
The Magnet I Use- battlemagnets....

[@dpz9872]

Wouldn't be too surprising if some very well dressed Italian business men knocked on your door asking for you to put a few things back where you found them. 😂

[@myfavoritemartian1]

2:24 An engine rear main bearing. 2:48 Those are John Deere sickle mower blades. (I have changed a bunch!) 13:04 That is a Ford smog air pump Thanks for the fun just watching!

[@lorditsprobingtime6668]

I wasn't sure which (if any particular) but did recognize those header knives as what they are. Also immediately recognised the bearing too. 3.40 might be what we call "welsh plugs" here in Australia. They're those metal caps you put a dash of loctite around then drive into an engine block to seal the holes they needed to cast the block. I've never noticed one that big before though, it's got the right shape but possibly a big diesel maybe?

[@myfavoritemartian1]

@@lorditsprobingtime6668 Camshaft bore plug.

[@lorditsprobingtime6668]

@@myfavoritemartian1 Thanks, that sounds like exactly the sort of thing I was thinking, just usually used in for the externals to seal the coolant into the blocks.

[@bill45colt]

@@lorditsprobingtime6668 not needed to cast the block,,,,but they are water jacket freeze plugs,,,,,hopfully if water freezes in the block, these weaker plugs will be pushed out by the ice and save the block from being split by pressure of the ice inside,,,,freeze plugs,,,,

[@lorditsprobingtime6668]

@@bill45colt Ah, thanks, that makes sense. I'm in Australia and I don't think we use, or need that sort of thing here. I have seen the damage freezing can do to engine blocks from watching channels like Barum Engines in England where they do get a lot colder.

[@stacylake9808]

Those triangle are knives from a sickle bar mower

[@alankessel8891]

They’re actually from the bean head of a combine

[@rodneyhallenbeck7830]

​@@alankessel8891gvb

[@remb9614]

Combine blades. Maybe a bucket of old blades fell off a truck..I don’t think they would have dumped them. That’s good scrap metal and every farmer has a scrap pile

[@brettnelson7518]

Knives? You mean blades?

[@IAM420ful]

The triangular blades you're finding are the cutting blades of a swather (cuts alfalfa,maybe wheat too.) Mounted in a line the width of the cutting head going back and forth just like an electric barber shear.

[@davidnoland6796]

Exactly

[@andrewo763]

also found on the front of combine harvesters

[@oldfart2413]

Yup swather blades. Installed several over three years cutting hay and straw as a teenager.

[@fk4515]

@@oldfart2413 also a sickle bar mower.

[@Redlinesixtynine]

Cutting knife of a grain head.

[@user-qe3mc9fj8l]

Glad you’re finding the triangular ones. They’re off of a piece of farm equipment. They used to cut grass and cut hay with them. That’s what you’re finding. Good luck guys find some guns instead.

[@edgarfigueiredo579]

The Irishman is not happy you found his fishing whole, Bobby I would not go home tonite. 😂🎉

[@1339LARS]

It seems you nailed it!!!//Lars

[@christinaalvarez332]

Wow, I'm so stunned by all the junk you guys get out of the water. Do people never swim in these rivers because they know they'll get hurt or sick? Thank you for all that you do to keep our rivers clean!

[@blakecantswim]

I think the main reason people don't swim around here is bc of the alligators lol. I'm sure hiding stuff is easy in this water bc I haven't seen it any kind of clear yet. Rains all the time too

[@christinaalvarez332]

@@blakecantswim On man you're right! The alligators! 😬😨😱

[@whopperdad22]

Since flesh eating bacteria you better be careful where you swim.

[@christinaalvarez332]

Wow! No way? I guess that explains why I don't see anyone in the water ever. @@whopperdad22

[@kateroberts1068]

Nailed it" with the guns" lol

[@kateroberts1068]

Did you look up cat fish skinners""" so he"ll know what they are"

[@edwardmartin3069]

If you happen to know anyone who is into forging hand-made knives, they would love to have all those syckle-blades. They are high-carbon steel and would make a great knife blade.

[@jonathanwelter]

Those blades are for cutting bars on sickle mowers, mower/conditioners for cutting hay, or combine header for beans/sorghum/wheat. I’ve replaced many of those growing up on a farm.

[@do-re-me-fa3258]

You sure are nailing it today Blake….. keep going you’re turn for a shotgun🍀🍀🍀🍀 Indian dance💃🏼💃🏼🕺🏼 rain rain go away come back only in the late evening when we’re sleeping rain rain go away🕺🏼🕺🏼💃🏼

[@johnayers6024]

The blades are for a cycle bar off a hay bine , replaced a lot when i worked on a farm !

[@jamesmarshalla8565]

I just subscribed to your channel Blake, can’t wait to see your new video today!!

[@breathedeeply7467]

The triangular cutting blades are called sickles. They get put together into sickle bars which are moved back and forth by swathers or combines to cut the hay, wheat, etc

[@pennychristmas3467]

good job on the nails Blake ...... LOL ...... love watch your videos 😊🙃😊

[@barrymcdougal4816]

Bobby throws all his guns here ---- then forgets where he has thrown them.

[@stevegoans2187]

SICKLE BAR MOWER BLADES

[@USPatr]

The surrounding cities should allow you guys some funding for doing an amazing job cleaning out these rivers, keep up the good work....👏🏼👏🏼👏🏼👍🏼

[@blakecantswim]

We have been looking into that, but dead ends so far. They never call back

[@mandybrown7758]

What a day yes yall did clean up great video

[@donnapadgett6583]

Congratulations on the guns 😊. God bless and Happy Easter 😊

[@normazarr3106]

Hey Blake, This was a new record for you guys with the guns, am I right? Always so happy for you all! Congrats to Bobby, what a thrill, and well deserved.,,esp. for taking all the ribbing you guys give him! We ❤ him too yano! Very good day for you Blake. We also appreciate you having to bear the elements for the Vids! I wanna suggest to save up the square nails, as they are historical, and Artists would pay 🤑$$$, for them! They make some amazing, and beautiful things they incorporate in their creations! You would be wantinn, that Cool stuff, so maybe you could swing a even better deal with them! Ya need to see some of these pieces. All in all a terrific day! GBU.,SM.,NZ.,✌❤🙂🙏🤟😉ya did great!

[@blakecantswim]

6 has been the record for about 4 months, and we found 8 this time. That's going to be really hard to top in the future unless we find a safe full. Bobby was so excited he found those. I mainly find the average round nails. I do look for the square heads but I've only found a few. I'll be sure to hang onto them. My pockets are usually full of little finds at the end of the day 😂

[@kellyyears3311]

Do you have to turn them in?

[@blakecantswim]

@Kelly Years some guns we do and some we don't. The police departments where we are now aren't interested in the old rusted guns. Most of what we find are too old to use or hold any evidence, so they are just trash

[@NBZW]

Knife looks like a K-Bar folding hunter. If so that’s a find.

[@oldfart2413]

@@blakecantswim those old rusted guns can be restored. My dad bought a 49 ford and in the trunk was an easy Europe 7.69 all rusted up. 20 years after he and his brother cleaned it up it was my first deer hunting rifle. Open sight brought down a few bucks and does. Does were control permits.

[@lindapoore7608]

So much fun to watch!

[@davidwaelde]

The serrated metal plates you got are blades from a sickle bar mower

[@jamesvanscoy7717]

Have fun doing what ur doing

[@georgejosephhaigh7725]

It amazes me the junk that's in these little steams and the gun's you are finding and damn the nails you could build a house , nice find on the guns though 👍✌️

[@feistyhuman3579]

You need to tell Bobby to be careful with those guns or he’ll shoot his eye out….Happy Easter, Blake 🐣🐥🐰🐰⏳

[@blakecantswim]

He can hardly see now 😂 happy Easter

[@rftsfan1479]

those triangle blades are sickles. they can be from a combine harvestor or a mower of some sort

[@Redlinesixtynine]

That solid bar with the right angled piece is a steering spindle probably off a tractor. The long part is what turns/steers in the steering tube, threaded end of the spindle seems to be broke off and so it won't hold the hub on anymore. I have one almost exactly the same from a 135 Massey Ferguson.

[@fenlandrob6203]

Hi Blake you have found the knives from the cutting bar from a combine harvester great for scraping. Rob from the 🇬🇧🍺😊

[@peterjohn1]

The cutting blades are from a sickle bar. Cuts just about anything. I've see mostly used on standing corn to be harvested for silage.

[@Barbie.Boo1961]

Those Tri angle pieces are from the cutter on a combine . My husband said, he farmed 40 yrs.

[@korgan7779]

Nice video, nice finds, and awesome to clean up the rivers! The Pocket Knife isn't a "Buck 110", while i'm uncertain of the brand as many companies made that model over the years but it is generically called a "Bulldog Clasp Knife". Some where lock back and some were just slip joint without a lock. The tail end of it comes to a pretty sharp point so I have a feeling it is either a Marble's or Parker, Parker-Frost brand. They don't make that model/style of knife very much anymore. I think Rough Ryder has the Rough Ryder Reserve 'Clasper' they make now though.

[@fruiinparvarerum]

I find it sad of all the trash people throw into rivers, thanks for cleaning it up a bit.

[@haroldmordt4421]

Do you ever think of contacting the local police when you find these guns?Cannot figure why they wound up in the river unless there were suspicious circumstances.

[@remb9614]

It makes you wonder. No one throws away perfectly good guns. Kinda startling how many are in there if we assume all were used in shootings

[@gordowg1wg145]

I would have expected that would have been one of the first things to do - as you say, there's only one reason people throw away firearms into a river - and it ain't good! Even if it helped the Police close just one case, it would have been worth the call. Rem, remember they will have been dumped over a number of years, and when you consider how many firearm related crimes occur, in just one year*, the USoA it really isn't that surprising if a criminal, or several criminals, used the river as a dumping spot. For example, averaging more than on4e mass shooting a day so far this year - and that's not counting several times as many armed robberies, single shooting, gangs, etc, that may not have even been reported.

[@MegaBait1616]

@@gordowg1wg145 , I've seen police dump them.......

[@alaura14]

If the gun doesn’t have any visible numbers k but they won’t give it to the police because it’s pointless but sometimes they find guns that are good and keep them so I don’t know

[@John-oe5nb]

1:37 Steering arm for a car. 2;25 Engine main bearing. 15;07. Fluorescent light ballast.

[@Redlinesixtynine]

Tractor steering shaft, w/broken spindle thread.

[@landrelarose745]

I know what those blades are for. When I was living at home, we lived on the eastern side of a city. That property was a farm of less than 30 acres. My dad said 28. It was on the north side of a creek. The first animals I saw were cows. Those blades came from a grass cutter. He didn't use it for many years, so I decided to fix it. It never stayed together. It kept breaking. So the I decided never to use it after that.

[@pressinpickle345]

2:25 it's a bearing probably from the rod and piston you pulled up.

[@roadking99jokerst60]

Shape says it's from crank . Controls end play.

[@pressinpickle345]

​@@roadking99jokerst60thrust bearings only have a lip on one side. It's probably a main bearing but still like my original comment it's probably from the same engine the rod and piston are from.

[@roadking99jokerst60]

@@pressinpickle345 Pickle calls it correctly. Amazing what's in the water. There are folks that create "Art" from iron and findings. Be well.

[@do-re-me-fa3258]

Right at the end, Blake mentioned when he picked up something he had said challenger challenger to me it looks more like a carbine piece carbine. That’s worth a lot of money per pound gotta keep that separate…….👍🏼🤞🏼👌🏼

[@blakecantswim]

It was lost in the pile... I forgot to set it aside, unfortunately. I wanted to keep it, but I get sidetracked easily lol

[@metrkfld]

Those blades that you were finding is probably from a farm mowing bar. Cuts grass in fields etc.

[@thomaskapp8306]

i know there blades for the bar . . because i had to replace them each year whe i got the bar ready to cut hay each year .

[@ericbunch7801]

Have replaced dozens of them , on the haybine

[@BalboaBaggins]

Nice work cleaning up the water. 👍

[@paulmurphy9573]

Those triangular blades are probably off a oold farm mower that was originally pulled by horses. I believe it is called a sickle mower Paul

[@Redlinesixtynine]

They still use the same kind of teeth today on haybines, grain heads etc.

[@josephbrady9718]

Great video! Extreme scrapping, You guys are amazing!

[@gearchallenge7555]

You people perform a great community service when you clean out those waterways of jun and sharpy pointy things. Also seem to have found a popular gun-evidence dump. 😆

[@imthebadguy3225]

That bridge is the first stop after a drive by shooting!

[@Croymedic]

The triangle blades took look like the air diverters used on power lines.

[@rossbrumby1957]

Good one tipping all those loose nails out- now you'll be sprinkling them on the road all the way home. Time for a solid close fitting tailgate.

[@rencleavus5213]

17:08 That is a barreled receiver for a Marlin .22 semi-auto, most likely a Model 60.

[@imthebadguy3225]

They suck! you can't access the breech for cleaning, so you have to push all that gunk into the action.

[@billluckenbill1694]

Those are on a sickle bar that comes probably from the state when they move the right way they change those every two days

[@user-mw3mb2uv8n]

What a great idea! Take the metal garbage out of the water. Taking the good with the bad, at the end of the day, scrap sells.

[@moondog4313]

I hope y'all keep the unused bullets out of the scrap when you take it to scrap yard, they can be set off and they can be set off in your scrap buckets if hit just right

[@rossbrumby1957]

12 gauge shells are by no means waterproof, the powder will be wet like mud. They'll never go off even if the primer does.

[@bobbyfischer6786]

She looks very stable and robust Patrick. Glad you seem pleased with her. Been getting decent sea trout up Oban way. Hope you and family are well. Keep on keepin on.

[@Evilroco]

The triangular blades look to be off a combine harvester or another agricultural cutter like a power scythe

[@Myferrets18]

Lovin the nailclusters LOLOLOL

[@mrMacGoover]

Those triangular blades are off a sickle bar mower.

[@j49]

I feel like the whole combine harvester was down there based on all of the engine parts found.

[@bertdunn1140]

8 guns 🔫

[@bertdunn1140]

Appreciate the like

[@blakecantswim]

It's going to be a hard record to top in the future

[@bertdunn1140]

APPRECIATE THE LIKE THANK YOU 😊 FOR THE LIKE MOST APPRECIATED

[@RichieCat4223]

1:35 That is part of a steering arm for 1930's car. 2:25 That is half of a crankshaft main bearing . To what engine is unknown. 3:39 That could be an engine core plug. Large enough to cap off the end of a camshaft. 4:59 That spring is a brake shoe return spring used on drum brakes. 13:08 That's an air injection pump used on engines to help with emissions.

[@blakecantswim]

Somebody was cleaning out the shop and didn't want to drive to the dump. I appreciate the education. I'm constantly learning more bc of yall schooling me lol

[@roypowell3450]

Just found your channel will keep an eye on you!😉. Cheers from the UK.

[@blakecantswim]

Welcome to the shit show 😂😂

[@nutcase0001]

Watching all y'all's videos gives us a more in-depth view of the days you go magnet fishing. Are you going to put a camera on Kyle too?

[@blakecantswim]

@Rick Leasure kyle is wanting to film his restoration process of our finds we keep. He comes on the road just to take a break and have fun.

[@masonmercmetaldetecting]

That was insane!!! Best magnet fishing trip i have ever seen! What part of the country are the waterways this dirty???

[@AttilatheHun576]

blades are for a sickle bar mower or cutter bar on a harvester/windrower etc. farm machine. I had to rivet them onto the bar when I was a kid on the farm.

[@ChrisW-fi1yl]

The diamond shaped serrated metal pieces are from a swather that cuts hay or alfalfa.

[@verettejones9510]

Hi Blake. Well if you need a nail you got plenty that’s for sure. Take care.🧲🧲🧲🧲🧲🧲🎣🎣🎣🎣🎣🎣🥰🥰💯💯💯💯💯💯💯

[@eilemoo3272]

My God that water must be Very Poluted - considering that area is so close yo the edge-

[@ronaldfazekas6492]

Did you ever contact the local PD about the guns?--Nobody just throws guns off a bridge without a reason!--one might help solve a crime

[@raymondo162]

those triangular blades are from a combine harvester cutting head. used for wheat and barley mainly in uk

[@douggoll2382]

The blades are combine cutting blades corn.

[@willklinger2558]

sickle bar blades

[@dwrdwlsn5]

Swimming in a modern river anywhere NEAR civilization is often not safe. Thank you for pulling some of the crap out.

[@rhondascraftobsessions5817]

Those blades look like they are from a Combine or other farm equipment.

[@wefarm40]

The little triangle (saw like) are for a sickle at mower

[@craigkaschan4822]

It could be loaded so you point it at your friends. It’ll clean up nice.

[@anniegaddis5240]

That waas awesome fun ti watch, even for this old fart! Am sharing on MeWe!

[@billskinner623]

Those triangular blades are from a sickle bar cutter. They were used to cut hay or silage.

[@flick22601]

At least one person knew what they are.

[@crherniman]

hey man new subscriber here! Love the positive energy with you and friends. What type or brand of magnet do you recommend?

[@blakecantswim]

Battlemagnets.us my dude. I'd recommend starting with a 1500pound magnet to start with.

[@crherniman]

@@blakecantswim awesome thanks for actually responding!

[@davidnewland2556]

those triangle pieces are to a s sickle bar mower for cutting hay, it's an old fashioned type mower

[@morganbakert5038]

Those are some real real nice guns there buddy

[@angeeallen7003]

congrats on all the guns finds and anyone need some nails lol

[@tewdogs4475]

1:28 mowing cycle blades

[@hoganshero19]

Those triangular sharp pieces are for a hay cutting machine

[@haroldleonard2008]

Blades for siskel bar mowing machine helped my dad sharpen many of them farm life

[@johnrieger949]

The blades are for a reciprocal blade mower; I worked on a farm sixty years ago.

[@mcscheck2000]

That "No Idea" was a Thrust Main Bearing from an engine...

[@williewilson1206]

Blades of a hay cutter !

[@magnetmike5366]

Blake the Little Triangle pieces our combine blades

[@phyllisbenfield6703]

all the nails and spikes were probably from the old original wooden bridge

[@blakecantswim]

That's what I was thinking due to the size of the nails. I guess they just dumped the old bridge in the river and built over it

[@stanleywestell441]

FARM PLOW AND A CRANK CASE BAIRING

[@martinw9425]

They are sickle bar mower blade. very common implement.

[@Hayseed71]

They are blades that mount on a sickle mower

[@do-re-me-fa3258]

🍀🍀🍀🍀🍀 Good luck all. Hope you’re fine heavy heavy finds. Maybe you have time later to play with the ball😆😆🇨🇦

[@do-re-me-fa3258]

And here is one for you I love these hearts. Thank you so much.🤗

[@do-re-me-fa3258]

😆🤣❤ OK and another

[@mcscheck2000]

That last rifle looks like a Marlin Model 60... .22

[@josephrush3291]

Those blades go on a sickle bar

[@valorwarrior7628]

Finding Civil war era guns like the Spencer, Rolling-block, and Henry rifles would be absolutely fantastic.

[@blakecantswim]

We continue to search every day so it's only a matter of time before we find something else really cool

[@valorwarrior7628]

@@blakecantswim praying for that to happen

[@johnb9587]

Great to see you cleaning the river but you need to be extra careful handling those dangerous “Bud lite “ caps. Never know what you might change into...🌈

[@mutteringmale]

Too late! His next video he was wearing a pink tutu, dyed green beard with glitter and was handing out leaflets at an elementary school for a drag show in the cafeteria on Friday!. I tell ya, I'm not even going CLOSE to a Budweiser, a Target or Cracker Barrel ever again.

[@michaelfrieders5641]

The triangular serated blades look like their from a combine or a hay mower. The round knobbed thing looked like a pitman arm connection for a hay mower.

[@drskull9]

Corn or hay cutter blades

[@LivingFrugalAndPrepping]

Those triangle pieces with teeth on them or for a sickle plate for like a harvester.

[@ritchatkinson7543]

those blades go on a bean head for a combine

[@wellshutchins6885]

You might want to turn that S&W MP into the police. If someone ditched it there was probably a nefarious reason and it looks to be in good enough condition to be identified.

[@garyjackowiak9402]

bearing cap for an engine

[@paddle_shift]

Dang, standing on those guard rails like it's nothing.