GY6 Ruckus rear disk brake kit [HOW TO]

[@abels_04]

Perfect kit design and great instruction video.

[@bankourpoli9909]

Thank you. I have XS1P52QMI Sym crox 125cc Can i Chang to brake disk Waiting answer please

[@JTL-DK]

Why you use imperial on a metric engine? Is the lug nuts and nuts/bolts in this set metric or imperial?

[@luiskuilan9900]

Is there any chance that this setup should be used with a standard Vento 13 inch rim

[@mohammedal-daini8790]

Is there another way without changing the Wheel ?

[@GnomadScooters]

Awesome informational video! I have 2 Quick questions, Will this kit fit all GY6 150 models or does it only fit the Ruckus? Was looking to do a stretch kit with a wide tire on my Chinese scooter build I’m doing. 2nd Q will stretch kits that have a GY6 fit a Chinese scooters as well as the ruckus? They all have the same motor mounts engine side so does this mean that the mounts on the frame would also be the same? Thank you for all the great content! Chris.

[@Xanjer]

Is there also a hub for an Aprilia scooter??? so that i can fit a wider 13"wheel....

[@CesarHernandez-vf3st]

Hey bro. Does this fit the maddog icebear 150 cc 2015 ? I love the look I want it

[@Tomijus]

Can you please do it with 10 inch wheels

[@RollingWrench]

Not enough room ;-(

[@Thommy002]

Exist a kit like this for zuma 50?

[@kebunperancangan]

i would love to know about the wheel and the hub , the wheel is like have 4 bolt nuts.

[@akbangleoro428]

Hows the price for a unit

[@ericdoran4313]

What do I do when the caliper hits the bolts on my 2 piece wheels?

[@bringnoise6096]

Hello do you have for Zuma 125

[@aaronmartin6234]

Is there amy way to put a disk kit on a gy6 139qmb ?

[@aptechknowledge]

Can this kit be fitted on a 2018 150 vespa primavera?

[@RollingWrench]

No :-(

[@HyperSmoker95]

Like your vids man!!! but can you do some vids about the 139QMB so people like me can learn more about that engine.

[@scootersonlyrepair510]

It's the same engine just 49cc

[@dadzilla007]

Would love to see this for a 50cc!

[@Bert439]

Dual disk on a 50cc does not make sense, still it sounds cool.

[@led23rus1]

And what is the diameter of the disk? 200 or 220mm?

[@RollingWrench]

220

[@SuperHornet54]

Isn’t the bleeder supported to be on the top side of a caliper ?

[@asahall7046]

Yes, Ive been burned by that on a disc brake swap before. I had to unbolt and roll around the rotor to bleed. Then re-mount. No big deal really

[@RollingWrench]

That caliper has a movable bleeder. But yes, you are correct

[@led23rus1]

Hello. Where do you buy a caliper mount for a moto GY-6?

[@RollingWrench]

www.rollingwrenchdenver.com

[@franksmith2618]

What is a good site to get a 50cc long case engine Amazon apparently doesn't have any

[@RollingWrench]

Email us. We can get you one. www.rollingwrenchdenver.com

[@autumnr4004]

Why is the bleed valve at the bottom of the caliper? that's gonna make it harder to bleed air bubbles out, since they like to float. Otherwise, great kit.

[@RollingWrench]

You can switch it no problem. There is a bleed hole on both sides :-)

[@LeeLee-xt5uy]

has my speedfight 3 125cc got a GY6 engine? and is there any mods i can do to make more powerful?

[@RollingWrench]

I’m unsure about that model of scooter. If it has a gy6 no problem

[@joshuahowe1001]

Do that make a it for a zuma

[@RollingWrench]

Not to my knowledge

[@maxkim8642]

I so much learn from you thankyou so march

[@RollingWrench]

Thank you for the support 🙏🏻💯

[@noelsuberano5069]

Sir how much the Ruscus rear break?

[@RollingWrench]

$400

[@eric67miller]

I see on the website that this fits a 12x8 but not a 12x7. Can you explain why a narrower rim won't work?

[@RollingWrench]

The brake caliper hits the wheel with a 12x7 :-(

[@noelsuberano5069]

Sir how much the rear set?

[@RollingWrench]

$400, link in the video description

[@recycle247]

Should’ve gotten the low stretch swap instead of the OEM look. Oh well Revino it is now!

[@timothywintle5937]

Won't work with 10 inch? bummer.

[@roywalls5595]

Hi rolling wrench

[@RollingWrench]

Hey Roy! How are you man!

[@roywalls5595]

@@RollingWrench I been updated video camera gopro hero 5 black on cellphone! I order sugru glue for chin mount!

[@gregslair4278]

Well I have a Genuine Venture. It already had a rear disc setup (with 14" wheel). However, the engine is blown and I want to upgrade to a GY6 (since Genuine wants $1100 for a 49cc engine). Do you sell the kit without the caliper since I already have one? And will this kit work for the Venture? Excellent video by the way.

[@austinbayse9120]

How did you get 14" wheel in there is there really enough clearance?

[@gregslair4278]

@@austinbayse9120 It came from the factory with 14" wheels.

[@dindot15]

I need one

[@ronaldbalusdan4136]

Love to have agive aways

[@jamest.5001]

Nada broken GY6 then, haha

[@xjidanx]

hit the dislike twice, then like. great video