HALLOWEEN HAVOC 2023 CUBERLAND KENTUCKY

Halloween havoc 2023 was a lot of fun but a lot of learning. This was the first time this track had been open and ran on in over 8 years and it was a true virgin concrete. This was to be my first true no prep race and we have a lot to learn.
Fridays race got cancelled due to weather, so Saturday was going to be are first pass down the track in hopes that we had the set up correct and we did not.
After a lot of racing we were up, released trans brake in burn out box and it sticks. Get to the line and spool release and it drags . So even thought are weekend did not go as planned we still had a good time and learned a lot. This was are first but definitely not are last no prep even.
Thanks to my team for showing up, thanks to the track promotors because I know it was a lot of work and thank you to all the people that watch the channel for the support.

[@funfun8095]

I'm betting it's a voltage issue. A lot of transbrake solenoids need a minimum 14 volts. 12 volt system can usually do it, but it's always iffy. Make sure wiring is up to snuff. I build racing th400s and have seen this issue before. Be best to go to a 14 volt battery system or even 16 volt. Especially if you're only racing it and go to alcohol and smart coils.

[@BOURBONANDBOOST]

I don't disagree with voltage issue with all the wiring issues we have found on the car. Right now it's getting a complete rewire including trans wiring, refresh on trans with new brake and internal dumb. We are go na try to get the car up to the standards that we perfer

[@funfun8095]

@@BOURBONANDBOOST 👍 14 and 16 volt are big improvements over 12.