Handyman Uses Blow Torch To Install A Garbage Disposal | You Won't Believe What Happens |

If you don't have one yet get it right here. amzn.to/2IKskmz Have you watched my first video? Here it is. • Converting a shed into...
#thehandyman
#handyman

[@tnhawkeye6155]

“Mr. Mittens peed on the floor today.” And then back to the job at hand. Not sure why I laughed so hard at that. Just the nonchalant way you said it. Love your videos.

[@dennisleblanc7933]

I loved your clear cut step by step garbage disposal install! You rock handyman!

[@redsunpro]

I swear you are looking at my honey do list before doing videos. Your content has been super helpful to this first time home owner.

[@kiwdwks]

Thanks for showing how to replace a disposal. Good info for sure!

[@edover50]

In my region disposals are coming out and not being replaced, almost close to being outlawed. New homes are not even being roughed in for them in a lot of cases. The county’s have all gone with organic recycle ( yes, another bin to haul to the curb) and nothing goes down the sink. Got to say though, it’s a positive thing, my weekly garbage is down to a teeny bag and everything else is recycle pick up.

[@CookieManCookies]

ahahaha, if I had been you, I would have whipped out my can of Seafoam Deep Creep, sprayed it, heated it up, sprayed it again, waited 30 mins, then yanked it all off with no fuss.. lol

[@alexanderheling2057]

My old apartment I rented we couldn’t even use the garbage disposal when we moved in because the painters that the they contracted out before we moved in put nails down the garbage disposal how smart is that! It was very rusty!!!!

[@wsgeo]

If you replace an old garbage disposal with a larger capacity disposal unit, sometimes you can't use the old black ABS pipe because it's at a different height compared to the smaller unit. So you have to redo it.

[@ryandouglas3312]

lol. "And thats exactly what i'm going to replace it with!" PERFECT

[@bretyost]

The Harbor Freight fake hate is the best running gag on the channel

[@Subfightr]

Lmao I knew he was gonna touch it when it was hot. Lmao I know better and I do it every time. Lol

[@bmac8130]

Justin Lelbach so did I.... that’s what all of us have done a million times before haha

[@Subfightr]

@@bmac8130 :)

[@stonesourG6]

I’ll just grab this ring now and... OWW!🤣👌

[@sargepc]

Sounded like Mario when he gets hit with a fireball!

[@cryptotexan3320]

Had the same thing in one of my rentals. Used vice grips on the rusted bolts = no prob! LOVE your channel. Thanks for sharing your experience / wisdom!

[@aphex4000]

I've had to replace a Badger garbage disposal with the exact same leak! That rusty bit would definitely have busted up my knuckles. Great job on the repair!

[@rayortiz3228]

Nice job 👍😃

[@TechieTard]

I use a soldering iron and heat up the screws. But hey, if you need a torch...get a torch!

[@brendanf8969]

Snap-on off sets harbor freight, yes? Can't believe more people didn't pick up on that. Nice work. I would say add a 5/16" and 1/4" 2 in 1 nut driver to your kit, seems like a lot of appliances have those fasteners, a lot friendlier to use than a slotted! Great work.

[@fatguyonagrom9515]

Been there a million times but less Torchy and more Angle Grinder'ly. LOL!.

[@MikesDIY]

You can get these with the plug pre-installed. It's only a few more dollars than the one without the cord. I charge that to my customers and still charge the same for labor. I have to order them in from hdsupplysolutions, but they only take 1-2 days to ship to me. I keep 3 on hand at my shop and 1 in my van. If I run into one that is hardwired, I install an outlet. It makes it easier next time and doesn't take me any longer to swap out. I just have to carry a 1 gang metal j-box, outlet, and cover.

[@EricJohnson-dr5wb]

You can also turn the locking collar by inserting a Phillips head screwdriver in the part he was gripping with the channel locks.

[@jasonrawls6959]

For those that will lose their mind, only countertop receptacles within 6 feet of the sink need to be gfci protected. Dedicated equipment such as dishwashers, garbage disposals, fridges, etc. need not be. Your welcome.

[@TheHandyman1]

Thank you

[@xersys]

This also depends on the area. California makes you GFCI your garbage disposal.

[@garageliving3658]

@68Camaro RS/SS *you are garbage disposal?

[@tonycatalano4338]

In Chicago, it has to be hardwired via a BX whip

[@fd3871]

what prevents a ground fault from shocking someone since there is no gfci?

[@robstephens]

Mr. Handyman, can you enlighten me as to the purpose of this device? Thanks, AOC

[@TheHandyman1]

You trim your finger nails with it. 🤣🤣🤣🤣👍👍👍😂😂😂

[@bobsoft]

One of the common problems with in-sink disposal units is the increased likelihood of clogs, especially if the food waste contains saturated fats, which solidify at room temperature and can build up inside pipes. Although these tend to occur more often in high-traffic restaurants or commercial buildings, blockages are nonetheless responsible for about 75% of all untreated sewer overflows.

[@bobblanchard9041]

@@bobsoft Exactly what it did to my pipes.Got rid of it 30 years ago.Created more problems with my old cast pipes.

[@timyattaw162]

A long sweep sani t would be good on that disposal drain. Good info as always.

[@MyDIYBuilds]

I had to use a grinder to cut a kitchen faucet out once..but I usually have no idea what I’m doing anyway😂

[@mollylinus]

Also PB blaster and the 20v impact driver may have busted that screw loose. Thats my go 2 when the torch is not available.

[@dogtag714]

Nice details 👍

[@joelrunyan1608]

Don't use channel locks to do that... u stick a screw driver Into the three tabs sideways. Works 1000× better.

[@AaronCo29]

The one time I had to heat up a ring like that, I grabbed the screw like I had never torched it!!!

[@DelmuryAngel]

Love your videos

[@mollylinus]

"Gonna need the torch" says me on every job. ;0)

[@vinceveltri7732]

HM, you may have wanted to mention the knock-out plug for dishwashers (if one was to be connected to the disposer).

[@Aepek]

Replaced one just like this, as was linking etc... Went to remove it with the tool, & as I was turning (the unit was SO rusted and old); the disposal broke in half. The motor & electrical part just fell off, & the metal casing was even cracked inside. Whoever installed, ran the electrical directly out of same hole as plumbing for sink drain & didn’t even wrap the romex with any protection(major no no in nec code). Ended up doing a complete rewire with box etc... Good times, good times👍🏻 Lastly, I always USE putty....find it works the best & never have call backs. Fun story. Got called for leaking sink. Went in & owner said they tried to fix with the silicone sealant. They just squeezed the silicone in between basin lock nut & had silicone everywhere. Took more time removing, cleaning, & cutting the stuff out than installing new sink drain & disposal....he literally used the whole tube of silicone🤣 & sink was still leaking. Okay, great vid, & glad use & prefer putty. L8R ✌🏻 (I know you have some great stories, have heard some😊)

[@DelmuryAngel]

Thank to this video I can tell my new boss tomorrow that I know hot to connect that.

[@jddonahue2]

Looks like an Insinkerator Badger Series. I use them and like them No rust issues. Yours must have been leaking for some time.

[@ig33ku]

4:24 he goes "....... " And the sink goes, "woo hooooooo"

[@ChrisSilverman]

4:25 “ow” haha - can’t count how many times I’ve done the same thing!

[@davemotti8070]

High pitched scream from the handyman

[@HamiltonAdolphus]

"Mr. Mittens peed on the floor today." Like

[@lrc87290]

Guess you didn't have the impact driver handy. Hated when guys in work would heat something with a torch and then spray kroil on it. I never thought it helped and just made a lot of stinky smoke. Can't argue with your results. Nice video.

[@davidbarr5557]

In-Sink-Erator used to be the standard. After 2 rusted out on me exactly as yours did, I switched to American Standard. The big problem with ISE now is the grind chamber on the less expensive models rust and corrode. Didn't used to be that way.

[@robertlong5171]

It is a good idea to install a p-trap at the disposal to help eliminate smell

[@johnhightower8737]

Sweet job .

[@leadpersuasion]

I've replaced hundreds of these Badger 5's in the apartment complex I worked for over the last 5 years.

[@harrisonboone2248]

It pees me off that dishwasher and garbage disposal manufacturers don't put power cords on their appliances. It also really annoys me when clients don't empty the cupboard below the sink and the sink itself before the plumber/handyman comes to work on it.

[@jharrisiii]

FWIW, don't know why or what rules apply but, I've seen and replaced hardwired units. BX or "flex" comes out of the wall and is directly wired to the disposer.

[@gonzalezliu86]

woooooow wd40 and some fire to loosen a rusted stubborn bolt. thanks i am going to store that one in the back pocket because i run into that scene more than i would like lol.

[@waynekerr2472]

When they are really stuck spray it heat it up and spray it again it will smoke alot but seems to get in the threads better when it's hot

[@James-kh5or]

Yep, that's a pretty crappy GD... I know from first hand experience: we used the same exact model in all the companies I worked for doing maintenance. EDIT: GD replacement jobs are, on average, the smelliest jobs. I have had worse stank from those than dealing with whole-building backups.

[@AbbreviatedReviews]

Is flaming WD-40 ok to breath? Asking for a friend...

[@xxxhoodooxxx]

Do you even vape WD-40 bro?

[@jeremydewolfe8026]

“Don’t breathe this!”

[@2010twix1]

I've replaced alot of those basket strainers with a cordless angle grinder and metal cutting disk. Off in a minute. Just don't cut into the sink.

[@mattmonaghan3354]

Badgers. We don't need no stinking badgers. Installed many.

[@TRAPLIFE101]

Handyman Breathing in Smoking Hot WD-40 could be cancerous wear a mask We need your health at the best conditions for these free Handyman online school training courses you got

[@TheHandyman1]

Only if you live in California.

[@blueferral3414]

I pull garbage disposals out of all my rentals. They are nothing but problems.

[@prestonegan2931]

I recently replaced mine, exact same disposal for the exact same reason.

[@anrod185]

I set the old unit on the sink drain this applys a little downward pressure while you install gaskets and ring.

[@TheHandyman1]

That's a good Idea. Thanks for the comment.

[@lrc87290]

Oh. I watched the rest of the video. you did have an impact driver. I was a subliminal commercial for WD-40.

[@georgewelden2507]

Actually those Sears mail order houses were very well built.

[@Dollar_Menu]

That should come right out (repeat) 🔁

[@Joshpekol]

How dare you use harbor freight channel locks🤭

[@jimb2758]

Instead you use the unjamming wrench that comes with the disposal... : ) jb

[@carlmccoy662]

Someone lost a ring and took that disposal off, they put it back on(without the screw) and it has been leaking ever since. Check all your p-traps to make sure they tightened them back up. You should buy some better screw drivers

[@MikesDIY]

To get to that screw they would have had to remove the disposal first.

[@andressegura5838]

I would've just cut the screw at the middle with my grinder..much faster

[@fununclenerfs]

Going back to that old school "man cave"

[@frankornelaz8234]

Next time use a impact drill motor and anti-seize on the fasteners. Much less drama!

[@TheHandyman1]

That would have instantly stripped the screw.

[@duanewilson3941]

I replaced mine once. That ring that you had to spin to get it off and back on wouldn't move. I mean I tried everything to get it off but I couldn't get enough leverage. Out of desperation I got my air compressor and a palm nailer and popped it a couple times and let loose. Did the same thing to tighten it back up. Anyone in a jam, give that a try.

[@geoffhoweth]

AHHH Badgers are the worst.

[@stephenwatson1873]

“You won’t believe what happens next”. He installs a new waste disposal, who would have believed it?

[@lrc87290]

Please install a dishwasher for those poor girls!

[@chuyojeda2440]

Did you removed the plug for the dishwasher?

[@TheHandyman1]

Dishwasher is hardwired

[@MikesDIY]

@@TheHandyman1 he meant the knockout for the dishwasher drain.

[@briancornelius2899]

First again!

[@TheHandyman1]

That's awesome. Thanks for watching my videos. I really appreciate it.

[@briancornelius2899]

Appreciate your videos as well! Im a young handyman, and learn a lot from you. You're very wise in business and being a handyman.

[@EM-fi2qg]

0:09 Was it AOC? Ya know, garbage disposals and stuff.

[@droolbunnyxo9565]

Lol! A true ding-a-ling!!

[@Techman4567]

Wellll... what about that GFIC outlet??

[@thewhiteknight02]

It’s called a Smoke Wrench.

[@waynekerr2472]

Blue flame wrench is what I call my torch

[@droolbunnyxo9565]

Do "believe what happens" ~ it works. 🙄 (But thought, oh dear, your can of WD40 was going up in flames.🔥😲) I collect Sears Houses by Mail catalog books, & other builder's plans from the early 1900s. Homes then were small but charming & practical. People didn't have a lot of stuff, like today, so a big home wasn't necessary.)

[@Ken_Myette]

You put the washer on the wrong side of the waste arm

[@TheHandyman1]

Wrong

[@bmac8130]

I like to set the disposal in the sink holding down the flang while I mess with the gawd awful snap ring.

[@lambition]

Wouldn't it been much easier to just got the bolts?

[@TheHandyman1]

That doesn't make for a good thumbnail.

[@mr.brownplumbing]

oh lord...I can't believe I watched this....you do realize all you needed to do is cut the screws with a bolt cutter/closet bolt cutter. or use a pick to grab down on the split ring

[@charlesmcadory8286]

Grinder time!

[@cb2000a]

Use the 3/4 hp model with stainless components or better yet don't install a garbage disposal in a rental.

[@jorgejimenez1877]

I've never understood what the cardboard ring is for... I mean, I know where it goes, but what purpose does it serve?

[@edover50]

Jorge Jimenez it’s a gasket. It doesn’t look necessary but you don’t want to leave it out.

[@deration10889]

So plumbers putty is better than silicone?

[@dustinpomeroy8817]

Use silicon on acrylic sinks,but putty on metal ones

[@wags99999]

Once did a remove and install in less than 60 seconds at a national convention.. won a free disposal. Ummm. I've installed 100's if not 1000's over last 50 years..

[@Dlytell]

I believed all of it.

[@alopardo]

What's the square on the counter top at 9:10?

[@TheHandyman1]

Its granite tile counter top.

[@alopardo]

@@TheHandyman1 ah gotcha. It looks like some sort of cut out. Great thanks.

[@jmakc3541]

Click bait title worked...

[@nixxonnor]

"You Won't Believe What Happens |"... Did anything special happen, other than the screw coming loose?

[@harrvey]

2:30 Mr. Handyman, why didn't you use a Phillips screwdriver for a Phillips screw???

[@erik1514]

A philips head tend to cam out or slip when trying to put a lot of force into them especially upside down. A flat head can slip and cam out but not as easy.

[@briandjordjevic9969]

I just get rid of them they are nothing but trouble

[@3dB123]

Can you talk about door locks? I really don’t get why people recommend high need lock on front doors? I know they are harder to pick but who will take the time to pick a lock then they can just break a window or kick the door down. They are going to get in either way.

[@paulvargas239]

Smoking on the job

[@lrc87290]

I see it now. Doesn't drain into disposal.

[@donaldlee6760]

Really nice video. Does being both the owner and property manager cause tenant-landlord conflicts, particularly if you need to increase rent after a few years?

[@TheHandyman1]

No

[@Djm9393]

sunday funday

[@gbowne1]

sound like fun i just get the mf hot and put it in.. alll good then lol

[@Dollar_Menu]

Why not just put a high end disposal on it a call it good for years down the line? You always talk about how other property managers skimp out and just put in the cheap stuff 🤔

[@TheHandyman1]

I learn from the best. This one lasted 15 years. I have nothing against property managers putting in crappy stuff in rental houses.

[@dwight.bennett]

It takes about a solid year or two ... then the phrase "cost effective" gains perspective in context to most rentals. The most I would put into a rental is the first non-Badger model that sells for ~$110 just so it is not as obnoxiously loud for adjacent tenants.

[@fmradio42]

next time you go back bring some outlet covers

[@kennykendrick4877]

Handyman, purchase more investment properties with positive cash flow. You won't regret it, especially after tenants get them paid for.....

[@anthonycalvillo8966]

Lmao