Just an FYI if you rev it up on the hose like that without backpressure, not only are you increasing the chances that it will runaway on you, but you can easily bend or snap reed valves. only idle or just off idle on the hose!
@benjineeringtoday82332 жыл бұрын
So you remember when the 18hp puked on you because of the pressure? When you reinstalled that top plug you allowed it to build a negative pressure to assist in hold the gear lube in.
@TMackTips3 ай бұрын
Thanks for the video as it helped me get started. I just got one of these bad boys. I had a gear oil pump for my jeep but that has no screw in adaptor. The hose was to big but found that the plastic return clip that fills up the toilet bowl inside the toilet tank can screw right in the oil tube fits right over that! Started on the third or forth pull!
@jbreefer1482 жыл бұрын
I'm still waiting for your great video of these motors working on the water. I'm very excited to see it soon. Thanks again
@HufflerGarage2 жыл бұрын
Weather and time have not been on our side, but with any luck we will have something up soon!
@jetguy12052 жыл бұрын
Rip breakin period
@melonboi186 Жыл бұрын
Break in doesnt matter. It doesnt change anything if you dont do it
@mohdzakiabdulrahman72702 жыл бұрын
That not the way , break in Hangkai engine,, should follow the braek in step by step,, you cant just simply ramming engine like that..
@melonboi186 Жыл бұрын
Break in doesnt matter
@Jevinrude_dude1582 ай бұрын
You don’t have to pull the safety lid out to kill the engine. You could just push down the red button on top of where the safety lanyard goes.
@jbreefer1482 жыл бұрын
I can't wait to see how this works on the water. Please let us know when that video comes out.
@HufflerGarage2 жыл бұрын
We’ve been testing it this past week. Hopefully we’ll have a video out within the next week.
@Kurtthedirt3 ай бұрын
I just got a 18hp Hangkai I went to pull the bottom plug and oil came out.
@ShotswithCola2 жыл бұрын
Need a forced induction corvette video
@omarviktoriyamosquera2023Ай бұрын
How long can a full tank last
@angelechenique4119 Жыл бұрын
Does the 6.0 HP also have a M8x1.25 drain plug?
@MindBodySoulOk11 ай бұрын
The science is ambient air pressure.
@HufflerGarage8 ай бұрын
The science is also air/fuel ratio.
@serge4349 Жыл бұрын
What's the weight on this 12HP, I find two different weights online (33 & 47.5kg)? Thanks
@lloydbauch890811 ай бұрын
75 lbs including empty gas tank. Mine just got here .
@davidjames40284 ай бұрын
Did it come with a serial number?
@alexstubbins62982 жыл бұрын
how much does it weigh please? been enjoying your marine videos. keep up the good work
@HufflerGarage2 жыл бұрын
It weighs 35 kg (around 77 lbs.). Thanks so much for watching!
@firdausali1987 Жыл бұрын
I think the real weight is around 27kg
@allenstayduhar71395 ай бұрын
Do you think that engine would be to heavy for a 12 foot Jhon boat? Im looking to buy one of these engines for my Jhon boat because i want something ballsy enough to get me up and down a moving river! I'd really like your thoughts on that? Or do you think i should just go with a 6 hangkai? 😂
@jamesperkins69722 ай бұрын
I just ordered one. It's pretty light at 63 pounds. The two stroke makes it lighter. I this it would be fine on a 12 foot John.
@gregcrabb3497 Жыл бұрын
What about parts and service support?
@HufflerGarage8 ай бұрын
Haven't needed any parts or service for any of our Hangkais yet.
@ignitewrld Жыл бұрын
Would this setup look the same for the 6hp model?
@HufflerGarage Жыл бұрын
Yes. It is very similar.
@marcusm67662 жыл бұрын
Hows the 18hp holding up
@HufflerGarage2 жыл бұрын
So far so good. We should have some riding videos up once we get it past the break in period. We've been running it in some pretty rough conditions and it's been good. Gets the 10.8 FT dinghy on plane even with 3 adults on board.
@marcusm67662 жыл бұрын
@@HufflerGarage looking forward to seeing how well it holds up for you. ive been thinking about getting one but your the only person with a meaningful video on it so trying to see if it would worth the purchase.
@marciananton92267 ай бұрын
How much does it weigh?
@HufflerGarage7 ай бұрын
73 lbs.
@userwww123Ай бұрын
Там нету 12 сил ,там максимум 9.8 сил .Это копия tohatsu 9.8
@troytoussaint3110 Жыл бұрын
How can I get a 2 stroke in to the US?
@HufflerGarage Жыл бұрын
They sell them on Amazon, eBay, and Walmart.com. There is a link to the Amazon listing in the video description. You may have to check with your state if you have to register outboards, but in our state we don't.
@ExploringCabinsandMines Жыл бұрын
Ahhh order it ?
@doc34thumper Жыл бұрын
So I was about to buy this, come to find out in Texas you title and register outboards, did package come with a blank title or Mfr of origin doc or other for titling registering? I’m new to this. I wrote hangkai and they said they don’t send paper work. That puzzles me.
@grindle1234 Жыл бұрын
2 strokes no thanks
@gbipit1 Жыл бұрын
Not sure I would rev like that until broke in
@abner091619922 жыл бұрын
i just bought one, i get it on friday cant wait to use it on my 10.8 inflatable boat hopefully it can get it on plane with 2 people.
@HufflerGarage2 жыл бұрын
It’s definitely a big upgrade over the 6 hp that we had. Haven’t got the chance to test it with 2 people but the 18 planes very easily with 2 people. Hopefully this one will as well.
@leonardmoxon2560 Жыл бұрын
It's about damn time you figured out how to change the fluid in a lower unit...not a foot....lmao 😂 I thought it was great when the 18 horsepower spit fluid everywhere... I just wonder how many people followed your instructions😮
@thinkcreate5596 Жыл бұрын
Yea I was always taught to fill from bottom up and watch it come through the top. That way no back pressure
@natewrong6861 Жыл бұрын
So if the hangkai 12hp is a copy of the tohatsu 9.8… Then what model Yamaha is the hangkai 18hp a copy of?
@HufflerGarage Жыл бұрын
The 18 is a copy of a Yamaha 15F
@MrGustySpence Жыл бұрын
I've just bought the 6.0hp hangkai do you know what engine that's a copy of by any chance?
@jbreefer1482 жыл бұрын
Is this a long shaft outboard? Because my 13' Saturn SD 385 requires a short shaft outboard. Either way I'm still looking at getting the 12 horsepower outboard. Please let us know how this performs on your bris boats. Thanks again
@HufflerGarage2 жыл бұрын
It is a 400mm short shaft. It's looking like it can get the boat up around 20 mph with one person and gear. We should have a video coming up soon. We've been trying to get the 12 and 18 past the break in and we've been running them in some pretty harsh conditions.
@jbreefer1482 жыл бұрын
@@HufflerGarage Amazing! Please keep up the good work and stay safe. I so eager to get the 12 horsepower which I'm sure it's a 9.9 HP but I could be wrong.
@jbreefer1482 жыл бұрын
@@HufflerGarage Are you also going to change out the prop for a better quality prop like solas props? I can't wait to see the videos. 😀
@gbipit1 Жыл бұрын
Not grease it’s actually oil with high viscosity
@joaquinsantillan62575 ай бұрын
My manual didn't even say about adding gear oil i ran it all day on water hopefully I didn't mess something up
@jaydub28884 ай бұрын
You put in oil I hope by now
@dondig2617 Жыл бұрын
I have a 14 jon boat! All I hear is about these motors on inflatables, I need one for my Jon boat.
@HufflerGarage Жыл бұрын
I wish we still had an old jon boat laying around that we could test it on. Unfortunately the one we've got now has a stick steer and remote controls so it would be difficult to toss one of these on it. That being said, I'm sure it would work fine. The Hangkai 12 is a copy of a Tohatsu 9.8, so if you think 9.8 HP is enough for your boat you should be good.
@paytonfleeger89915 ай бұрын
Where do you get the lube and adapter for the foot?