Harbor Freight Bremen Parallel Clamp 4-Month Review

Watch our latest video! "Refinishing a Retro Heywood Wakefield Desk With A Stunning New Look!"
• Transforming A Retro H... -~-
I've seen (and read) a lot of clamp reviews over the years. Most of them cobble together a series of pseudo-scientific testing parameters and torture tests that seem important but actually do very little to tell you how the clamps will perform over the course of years in your shop. So when I decided to conduct a review of the Harbor Freight Bremen Parallel Clamps (sovrn.co/qarzz1w), I knew I had to approach this with a common sense frame of mind. We won't be testing the flatness of panels, the squareness of the heads, or the clamping force available (watch this video to see why - The Truth about Parallel Clamps • How To TRULY Understan... ). Instead, we're going to do something incredibly ground-breaking: we're going to use the clamps for a few months.
The least expensive parallel clamps on the market: sovrn.co/qarzz1w
Get the Fremont Bed Course: thewoodwhispererguild.com/pro...
Get your TWW T-Shirt! thewoodwhisperer.com/product/...
00:00 Intro and disclaimer
00:43 First impressions
02:12 Smooth or Serrated
02:57 Foot and Standoffs
03:40 How to open and close the clamp
04:20 Free falling head hand crushers
05:35 Reversible head
06:01 Closer look at the screw
06:44 Closer look at the handle
07:24 Closer look at the heads
08:22 Head-Toeing
08:58 New Shirts at twwstore.com
09:17 Cost comparison
10:08 Real-World Test Setup
11:13 2 Months Later
12:09 A Problem
13:52 Let's Open it Up!
15:11 Respectfully Disassembled
16:01 Comparing it to a working clamp
16:29 Dissecting a Bessey Clamp
17:50 Adding more time to the test
18:31 Two more months later
19:35 Jason gets a replacement at Harbor Freight
20:13 Pros and Cons Conclusion
21:01 Pricing as of 5/22/23
21:49 Hobbyist perspective
22:30 Don't Leave Yet!
#harborfreight #bremen
Join this channel to get access to perks:
/ @woodwhisperer
Sign up for our free newsletter to be notified of a new video or other cool stuff happening at The Wood Whisperer! thewoodwhisperer.com/newsletter/
For more information, free plans, and helpful links: thewoodwhisperer.com
SUBSCRIBE!
kzbin.info_c...
Take a woodworking class online with The Wood Whisperer
thewoodwhispererguild.com
SUPPORT US ON PATREON!
/ woodwhisperer
PRODUCTS RECOMMENDED BY MARC
US - www.amazon.com/shop/thewoodwh...
Canada - www.amazon.ca/shop/thewoodwhi...
UK - www.amazon.co.uk/shop/thewood...
CHECK OUT OUR BBQ CHANNEL
/ twwbbq
WOOD WHISPERER en Español
/ wood whisperer en español
CHECK OUT OUR SHOP TOURS
www.thewoodwhisperer.com/shop-...
GET INSPIRED BY OUR VIEWER PROJECT LIBRARY
www.thewoodwhisperer.com/viewe...
DOWNLOAD OUR FREE APP
iOS: bit.ly/177u4An
Follow me on:
TWITTER - / woodwhisperer
FACEBOOK - / thewoodwhisperer
INSTAGRAM - / woodwhisperer
Pinterest: / woodwhisperer

[@mmgross144]

Great job Mark. Fortunately for me I was in the right place at the right time and went to Lowe’s on the same day that they were replacing the old style of BESSEY parallel clamps with the new ones. I spoke with the department manager who was doing the restocking and she asked me what I thought that the clearance price should be and if $9.99 was a good price for the 24” model? I said “Yup!”, and she marked all of them down accordingly, including the 50” ones for $19.99. I bought every one and have enjoyed using them for many years!

[@NV..V]

"Grip is a very personal choice any way..." ~ Marc Spagnuolo, 2023

[@gyalch1]

As I get older, the ability to use an allen key on the end of the Bessey clamp is becoming more and more my feature of choice

[@rootvalue]

Marc with a C!!

[@TheSMEAC]

Sooo personal

[@NBGTFO]

"Let's take a closer look at the head on this thing" - Mark Spagnuolo, 2023

[@harpomarx6147]

Mark- That was one of the best tool review videos I think I've ever seen. Realistic use cases, consideration of actual cost/benefits and an overall thoroughness made this excellent. Thanks.

[@mos8541]

u need to see more vids then there harp.

[@BlisterBang]

@Harpo Marx Don't forget it's entertaining, too! (So you want to keep watching it even if you, somehow, don't care about parallel clamps). Hey, watsamatterwich you!

[@austinveatch6993]

Thanks so much Marc. This is exactly the video I’ve been waiting for. I bought 4x 48”ers and 2x 24”ers a month ago and they’ve been great. Tired of watching people make videos saying they “aren’t square”. We all appreciate your time and input. Well maybe not all of us, but pretty much all of us.

[@TristanJCumpole]

Why would they need to be square anyway? I'm not even sure what that is meant to mean :-D Clamps delivery force through a contact area and squarity (this is my word for exclusive use by me) isn't necessary.

[@DennisHicks78749]

So true dat. I've seen several reviewers comparing parallel clamps who compare the out of tension square and I immediately clicked away because they highlighted their amateurishness and irrelevance.

[@PorgyPuddinPie]

This is so good. I love how I walked away from this feeling like I have a solid grasp on the pros and cons of this clamp and I don't feel at any point like I'm being sold on this or any brand. I wish all tool reviews were this thorough and unbiased.

[@BillCoale]

Thank you for this! Long term test reviews don't get nearly the love they deserve. They're every bit as valuable as head-to-head comparisons, if not more, especially when it comes to budget tools. A lot of HF tools are good enough for casual/diy/hobby/beginner use...and a lot are just not. It's super helpful to know which is which beforehand. And i really appreciate when professionals like you, with every justification to focus on what matters to you, make the effort to continue looking at things from other perspectives.

[@gerardbroussard6336]

Probably the most thorough parallel clamp forensic on KZbin. I bought two 24” Bremens, one of which experienced the same gripping issue that was covered in the video. This happened after around 3 overnight glue ups. The good news is that Harbor Freight replaced the defective clamp, no questions. I have same issue with a Bora clamp (1 of 8) but haven’t yet been in touch with the company. I think the Bremen clamp is an excellent value, especially given the HF return/replacement policy. THANKS FOR A FANTASTIC REVIEW.

[@erickuehne4194]

Good review Mark. I'm a Bessey user but what I actually found most interesting was that when you disassembled the clamp what you were left with was basically an F style clamp. So basically the parallel clamp was an F style with a few added relatively inexpensive parts which makes me think that the margins on parallel clamps are much better than the simpler styles.

[@TristanJCumpole]

This is exactly on point. The only thing parallel clamps bring to the game is built-in cauls and convenience of standing in place or off the workpiece.

[@sanderd17]

With F-style clamps, at least the cheaper ones, you also have to sometimes help it bite the bar and actually clamp. Since you can't do this with parallel clamps (due to the clamp body), perhaps they do need a higher-quality bar and clamp to function properly.

[@graveworks1130]

Just bought 2 48" Bremens from HF yesterday, haven't even had a chance to take them on a test drive yet, but I'll be sure to save the receipt just in case. Thanks for taking the time to do a full review

[@n8guy]

I think the driving difference between the Breman and Bessey is that on the latter, the "grub" screw is hardened, so it doesn't "smooth out" like the Breman (or even its own cast material would). This probably allows even its bar teeth to be soft, as it will just recut them. It'd be interesting to test the hardness of both brands' bars, clamp castings, and while you're at it, maybe even the screw (but that will definitely be very hard). I think that measurement would yield a much more detailed hypothesis on the differences. Great video - and excellent findings!

[@davisbdr]

Mark, I love your reviews. Not only do you get to the bottom of how the tool works, but I crack up a half a dozen times. I have a dozen Bessy parallel clamps that I've had for almost 30 years and they collect dust. Not a fan of parallel clamps...but I know people love them. It's still fun to watch a well crafted review of a new tool. Keep it up man! Thanks!

[@TediumGenius]

Do you even know how many "we'll check back later" videos that actually NEVER do so that are out there? Man, this is the very best long-term review I've seen yet! That includes everything from "how did my tree trimming work out with my apple harvest" to "we'll see what the sourdough starter looks like a week from now," and all sorts of other "we'll check in later" videos. IMO this was an excellent review, being as fair as possible to both high-end and low-end products, and I've made my decision based on this. Sorry it's late... but I had to tell you because you asked LOL! I'll be going HF mostly because the amount of parallel clamping I need is very low compared to many others. Thanks again!

[@PatrickLemay]

That was great. Felt complete and loved you did it over multiple months. Cudos on being thorough and patient. I've rarely seems someone do a review over time like that

[@makermark67]

Fair, honest review. Exactly what we've come to expect from your channel. Thanks for the time and effort, Marc.

[@ApexComplete]

I've been on the fence about picking these up as my first set of parallel clamps. I appreciate how you break it down, this is just the info I was looking for and has convinced me to pull the trigger on buying these. Thanks!

[@woodwhisperer]

The least expensive parallel clamps on the market: sovrn.co/qarzz1w Get the Fremont Bed Course: thewoodwhispererguild.com/product/fremont-bed/ Get your TWW T-Shirt! thewoodwhisperer.com/product/wood-whisperer-t-shirt/

[@a9ball1]

That was one of the most thorough review and testing I've seen in a long time. Two thumbs up 👍👍

[@jlbfd9389]

Marc, this was an awesome review! Thanks Bud, do more of these please!

[@jefskott99]

Wow! I just subscribed. This is one of the most thorough tool reviews I've seen, and I look forward to your other videos. I am watching this as I just purchased a few of the Bremen Parallel Clamps to add some heavier duty clamps to my clamp mix, and I just can't afford going nearly $100 per clamp on the Bessey, but I could a bit over $100 for four clamps using my Harbor Freight ITC coupon discount when these were down at $27.95 per clamp. You can see the math made me do it. However, when I bought these I couldn't figure how to open the clamp - came across that spring though - which clued me in to what you showed, the handle up release, brilliant. Thanks. I learned way more than I planned to on your video, and loved the danger demo on some of these clamps. Did not know clamps could be used as guillotines. :)

[@4x4xGMC]

It's been a couple years since I saw you last time and am happy to say you have succeeded in being one of the best reviewers I have ever seen. Very informative and I surely consider you a professional in what you do. Your wood working is great and these little videos are also very nicely done and helpful, Thank you for your time.

[@woodwhisperer]

I appreciate it

[@michaelarighi5268]

Thanks. Useful for someone like me who doesn't use them really hard or often, but would be grateful to have them around when I do need them.

[@u77171]

Marc shopping at Harbor Freight. I never thought I would see the day,.. .lol

[@khmisc]

Great test and review! Thank you for sticking with it over time. Regarding Harbor Freight, I borrowed an old 60 lbs jackhammer to dig a trench through rocky soil. I had to use a generator, which I also borrowed. I discovered the generator was sub-par when the jackhammer motor failed. Oops. The jackhammer was a cheap chinese model, already aged and worn by the time I borrowed it. I tried to replace it with a used one but I couldn't find one. So I asked the owner where he bought it and figured I would buy him a new one. He said he bought it at Harbor Freight, so I called Harbor Freight to ask if they had any. They said the one I had was covered by a lifetime warranty and I could get a new one for free, even though I didn't have a receipt! This was about 12 years ago, so I'm not sure if they are more picky now....

[@merc2dogs]

I did cabinet construction and better woodwork for years, and always used Bessey clamps, (you're correct, the Allen screw does provide a new 'bite' on the bar. just need to drive it through, not back it out because the messed up threads on the screw can easily mess up threads on the way out ) I have retired, and currently use Irwin clamps more often, simply because I don't use them as much anymore. It's the difference between a hobby and making a living, If I use something maybe once a month, instead of 3 to 4 times a week, I really don't need a top of the line product. That being said, I purchased many of my Bessey clamps before I was married, and we are celebrating our 35th anniversary and they are still going strong. (Giving me fewer headaches than my marriage has)

[@melgross]

The reality is that we never should be using clamping force near the max. If that’s necessary to hold boards that are not straight, you really need to fix the problem you have with making straight edges. Clamps are supposed to hold the boards just enough to hold them closely together when glued. They are NOT supposed to be used to straighten the boards out. If you do, then your work will be under a lot of stress, and can come apart, or warp. The problem with parallel clamps is that if they don’t work perfectly, it’s as though they don’t work at all (as intended). You covered this very well.

[@roym.1141]

The 48 in. Bremen clamps were just on sale for $32.99, had to get a pair to add to the parallel clamp collection, haha! Love your scietific approach to woodworking Marc and always enjoy your videos!

[@sgsax]

Love the long term use review. I wish more people did this for their reviews. I'm also a fan of the HF f-style clamps. Super cheap and decent enough quality for my needs. I always pick up a couple whenever I'm in the store. And I like the grips better than my Irwin f-style clamps. I don't need parallel clamps nearly as often, but I'll keep this in mind when I do. Thanks for sharing!

[@glencrandall7051]

Great review. Especially because of the time frame. Sounds like a good buy for hobby work. Thank you for sharing. Have a great day and stay safe.🙂🙂

[@wildman4642]

Thanks for the video...Very informative. I have been using similar clamps with cutting board glue ups and I started rubbing past wax on the bar for easy glue removal.

[@workerbee4891]

Many thanks!! I have always had Bessys but am needing to retool now in retirement and I was considering these clamps due to price. Great review!

[@tmr0806]

Thanks for a very informative comparison and review. I recently decided to splurge and treat myself to some parallel clamps after having used "pony" brand bar clamps on galvanized steel pipes, for about the last 30 years. I did look at the Bremen clamps from Harbour Freight and watched one review of them. But ultimately I decided to treat myself to four of the Bessey K-Body parallel clamps instead. I opted for the 31-inch size mostly because I was not sure 24 inches would be enough for some future projects, but also because I found a great price on the 31-inch Bessey at Home Depot online, with free next day Fed-X delivery. Most everyone charges about $60 for the 24 inch Bessey, but the 31-inch size was only $52.45. It's not stocked in the local stores and is only available online. Watching your review just now confirms at least in my mind, that I made a good choice. I'm not knocking the Bremen because it's a great price and may have worked just fine, but I feel a lot better about the long term reliability of the Bessey. The older I get, the more valuable my time is, and I don't like the thought of possibly having to return something that proves to be defective. Thanks again for a very thorough review.

[@ytbillybob]

Been sub for a long time. Regardless of that, this is one of the VERY BEST reviews of ANYTHING I've seen during many years of YT browsing.

[@MrBertstare]

I think my biggest takeaway from this is that parallel clamps looks like F style clamps with nice looking trim pieces! I’m not sure what I expected to be honest as I’ve never really thought about it

[@markglabinski526]

Thank you for the great information. I really was wondering about the Bremen clamps. Not anymore.

[@curtbalch2321]

Harbor Freight appears to be attempting to take the place of Craftsman tools with their guaranteed product lines. Like Craftsman of old they're seldom the best tools available, but with most competition made in China as well they'll be the best solution for hobbyists and even professionals willing to price in the replacement legwork. Thanks for the review Marc, looks like these are worth giving a chance in the endless quest to own an infinite number of clamps...

[@Funknwanker]

The low price makes it worth a try. I got a 4 1/2” angle grinder there for $15 for a single project and now just use it for sharpening my mower blades. I figure if it lasts a year I only spent $15.00

[@styloroc2000]

@@Funknwanker I'm on year 12 of my harbor freight grinder...and I put it through hell... certainly feel like I got my money's worth.

[@ervingoss5442]

Glad I came across this review. I bought 2 of the 48" clamps a few months back, and are holding up fairly well. I'm very much in the "hobbyist" category, so these clamps are just right.

[@CinemactionFilms]

I have the Bremens and Besseys. I bought 5 of the Bremens and wondered how they grip the bar. Now I know! 2 just failed because of slipping after mild hobby use for a few months. HF refunded my money (without question) because they had no more stock on hand.

[@BadAppleWoodwerx]

I can honestly say that I have 2 Harbor Freight stores within a 20 minute drive of my front porch and I have literally NEVER seen those clamps at either store, they sell out so fast.

[@briancollins7296]

must be all these other channels buying them up for their videos

[@metatechhd]

🙌🔩 Thank you, Marc, for delivering the video we've all been eagerly waiting for! I recently purchased the same clamps and they have exceeded my expectations. It's frustrating to hear people claim they aren't square when they work flawlessly. Your time and expertise are greatly appreciated by the majority of us. Keep up the fantastic work! Looking forward to more insightful content! 🎥🛠👍

[@chrisnash2154]

Loved the breakdown, the extended test and the tear-down to find the problem. 👍🏾😁👍🏾

[@benwofford14]

The "backsaw boys" sign in the background... 😂😂😂

[@cyberjohn44]

Excellent videos. A very good and honest review. As a hobbyist, going to give them a try.

[@woodshopnerdery]

Very well done. Thanks for doing the research and putting in the thoughtfulness and work.

[@mek90703]

Great review! It's always in the back of my mind whether HF tools are of decent quality, much less high quality. Thanks for clearing that up!

[@mjf1036]

new review. very honest and complete. I purchased 4 F clamps from HF a few years ago. After a couple months I had 1 clamp fail exactly like the one you experienced. Heck after you disassembled the HF parallel clamp it looked just like an F clamp. For my money I am going to check out the Rockler. thanks!

[@jimrosson6702]

Thanks Marc for doing this I’ve been thinking about getting some of these clamps. I would definitely buy them now

[@n8sot]

Thank you WW!!!! This is the video ive been waiting for!!!!These will work great for the small stuff i do!!! Thanks for all you do!!

[@BrandonGraham]

Wow. What an in-depth review. It's always hard to tell which Harbor Freight things are surprisingly good or understandably bad. Thanks!

[@BuildwithMooney]

Great video and information, but the humor stole the show on this one for me! My jam is to torchere myself by watching your videos ABSOLUTLEY! Bring it! It.s nice to watch some one that has a lot of knowledge. Thanks!

[@trentholmes1]

I really appreciate the thorough nature and unbiased information that you provide in your comparison videos. Keep 'em coming.

[@DennisHicks78749]

Thanks for being on the leading edge of testing these. Other reviewers just do the preliminary testing, call it good and recommend them. I've been sceptical and unwilling to throw down cash on these. No way Jose will I be buying Bremen. Ima stick wit Bessey.

[@pokeba3299]

Best review of clamps by an experienced user with practical knowledge. Thank very much.

[@shawnfrailey4958]

Harbor Freight’s return policy truly depends on store-specific policies. I was a store manager for them for several years until recently (am now a carpenter), but even I was turned down at other locations for warranty replacements. Overall, they don’t care about how the damage happened, so that’s a plus. Good luck to everyone using the Bremen brand. Clamps seem just fine

[@norm5785]

Thank you for sharing this review of the HF parallel clamps. Everyone have a wonderful day. Also stay warm, safe, happy and healthy. From Henrico County Virginia

[@scottboettcher1344]

Excellent sleuthing work, Marc; thank you!

[@RyanPrice]

So glad you took us on the complete journey with you, and didn't post the video after less than a week of testing. 0% snobbery displayed.

[@lv_woodturner3899]

Very interesting and useful video. Thanks. The low price of these clamps would not be sufficient for me to give up my Jet parallel clamps. I purchased my Jet clamps at least 10 years ago. I love the clutch design of the Jet clamps. I cover my Jet bars with masking tape to prevent glue getting on the bar. Dave.

[@johnnation713]

Thanks for the heads up Mark😊👍

[@brentfrench752]

Great test video. Very thorough. I actually saw a test of these clamps that was a quick review, I don’t even recall him clamping them down, but he did something like a 6’ drop test and as I recall, these clamps held up great and surprisingly, a couple of the expensive clamps broke, well the plastic covers broke. I liked that you pointed out the thread design as I never paid much attention to that when buying clamps! I’ve owned the HF f style clamps for years, and other than the round protective caps coming off, they’ve been great. You just have to add a dab of CA glue under the plastic protector caps or once they come off, they’ll continue to come off. Next time I’m at HF, I’m going to pick up a few of these parallel clamps as I’m not a heavy user of them at all. Well, I don’t own any parallel clamps, but for what I do, I won’t be a heavy user of them. Thanks again for the great review!

[@Dragon_With_Matches]

Thanks for the thorough review! I will likely be buying a few of these now.

[@AdkKarl]

Very helpful. Thanks for this well done video!

[@cameronnebe]

I highly appreciate the professional and well rounded review! So many people on youtube and other places seem to get offended when one thing doesnt work exactly how they expect. "How dare they make this like this!" You can almost hear them saying. Thanks for the realism with zero snobbery! I have tons of the HF F-style clamps and I think 4 or 5 of them have broken to a degree, but out of 100 or so that's not bad. I will get them replaced and life is good!

[@scorpiorysing]

Thanks, that was a great review! I've been wanting a set of parallel clamps, so these might be a good option.

[@jaimeecaballeros9742]

I am a woodworking enthusiast, not even a hobbyist, and buy my tools based on recommendations like yours. Though, I've been lured many times to end up with higher quality tools like Woodpeckers type tools. I have been saving bucks to gear my garage with some medium size parallel clamps and I thought woodpeckers' Semble would make a good addition, but their pricing is pretty scary. Now, you just gave me a good reason to use my money elsewhere and buy a few of these Harbor Freight clamps man. Thanks. Your videos are very informative and enjoyable. Keep'em coming man, we watch them...

[@jcowboy123]

I've had the Bremen clamps for over a year,only has one fail and it was like that from the factory. I absolutely love these clamps for both function and price.

[@RogueCow]

Wow, this video was so thorough and well done. I had a question and you andwered immediately in the next segment

[@ericsturgulewski2399]

Thanks, Marc. I was waiting for this video to see whether i should take my chances. Wasnt aware of the new rockler clamps either. Might go with those instead but great information.

[@flatlander523]

Hey Marc thar was really interesting and informative. Thanks for taking the time to produce this video, I am from Missouri an bigolley you are starting to sound like us.😊

[@TM62588]

Thanks for the Ricky Bobby reference. Have not laughed out loud at a woodworking video in a while. Much appreciated.

[@emerald1587]

This is a very helpful experience review, I hope many more will follow. I especially like the part where you explore why the clamp failed, and how the seemingly similar high-end differs in the details here. Therefore, in my opinion, we pay the price for quality tools, or not, of course. Thank you very much for this excellent video!

[@SteveAddis]

Thanks Mark. Best true testing review. Knowing that the Bessy has that screw making the bar contact point really shows quality. It may be hardened. I really wonder now what other brands use for their bar contact point. Also, thanks for explaining the out of square purpose. Now, trying to decide which one to buy. :)

[@Ice_Berg]

This is a great review! I know at the time it probably doesn't feel worth it to spends months messing with some clamps for one 20 minute video, but your efforts are so incredibly appreciated. I'd love to see teardowns on some of the other parallel clamps, especially cheaper ones like Rockler or Jorgenson, to see how their designs compare to the Bremen or the Bessey. It'd be nice to see where the price:performace ratio sweet spot is for a clamp that costs just enough that there's not a 25% chance you need to go to the store to exchange it. I don't know if even the good ones are actually hardened and are in the right range for it to work, but maybe something like hardness testing files could be used to check the bars and the head to see if they're too soft? Finding some way of testing hardness might let you get the same answers without doing a long term test.

[@Dunc2222]

Fabulous review. Thanks.

[@RyanWattersRyanWatters]

Not tested here but… I got a deal on Prime Day for four Powertek 48-inch parallel clamps at a price of $35/each last year or the year before, and they’ve quickly become my go-to for parallel clamps. They’re much lighter weight than my Bessie’s-I have several K body and. The juniors.-which I only pull out at this point when I’ve run out of Powertec to use. And I do a veritable sh^t ton of glue-ups. No joke.

[@johnpierce673]

Good video, fair assessment. I avoided Harbor Freight tools for a long time. When placing a paver path around a swimming pool I had the option of renting one or buying a tile cutter from HF for the same price. The tile cutter required me to make two passes on the pavers, but I got the job done and then lent the saw to my son in law who tiled his bathroom. Still have it, so I think money well spent. HF can surprise you now and again

[@jimwiskus8862]

Great job Marc! Thank you.

[@MCsCreations]

Really interesting indeed! Thanks a bunch for all the info, Mark! 😊 Stay safe there with your family! 🖖😊

[@LukeMason]

Fantastic testing and review!

[@johnnyb95678]

Great video with some awesome information. Thank you for doing the work!

[@tonyseeley]

Really good review, thank you - great video

[@dpmeyer4867]

thanks, I appreciate the work you put into this. I use a lot of Pony bar clamps and F-style clamps, but I do have a few K clamps

[@andypate3820]

Thank you, VERY thorough review

[@ligngood3787]

Thanks for so much time & effort into this video! I happen to love the free sliding that you called finger crushing, lol. Easier to put the clamps away. Rockler's do that but the bar material is too soft and is all chewed up. My Bessey's are worth the extra money. I'll probably pick up a few of the HF 24's next time they have a sale.

[@ashokmoghe8035]

Great review Marc - perfect for hobbyist like me. Thank you.

[@petercofrancesco9812]

I've never seen such a thorough review. Great job. I was looking at these clamps the other day. I'm just a hobbyist but just knowing of this flaw would bother me.

[@dooeydessimal8917]

This has been my experience with all harbor freight clamps. I have some that have been in use for 15 years and still working great, and a few have failed. Even as a professional, I think the cost is certainly worth it. However there is an obvious quality risk associated with their products. Great and thorough review!!

[@MrSaltydevildog]

I just left that same HF. Small world. Love your channel.

[@mhaz49]

I've been an H-F clamp user for >10 yrs and have had a few F-style and Ratcheting bar (quick clamp) clamp failures and a dodgy bar clamp failure. H-F gave me replacements every time. No questions, no issues. They even replaced a standing drill press when the spring to retract the spindle broke (not a replaceable part) and a pancake air compressor when the internal flap valve (another non replaceable part) broke. They do stand behind their warranties. Yea, quality is NOT always the highest, but for the price + warranty, they fit my budget and work/project demands. The original H-F clamps, and other products, under the Pittsburgh name were/are bottom shelf products & quality. The newer brand names: Bremen, Bauer, Warrior, Hercules, etc. are MUCH better and definitely more worth the money paid. I've had my share of issues with H-F and there are lots of stuff I would not touch with a 10 ft pole, but they are improving. I consider H-F to be about where Grizzly was 25-30 years ago - and lots of people rave about Grizzly now.

[@rexseven93]

This is just meant as a comment on a thought I have watching woodworking videos... I see a crap ton of money in clamps on the wall. I sometimes look in my shop and see dollars hanging everywhere. Hobbies are expensive, I guess. Great video, great review, as usual. I've been watching you since neither of us had gray hair. Keep up the good work. Hope you are liking mid-west living.

[@ForgeAheadwithMike]

The “non-square” thing reminds me of how the long flatbeds on semi trucks are actually curved, and when in use (with weight on them) they flatten out. So once the clamp is in use, it will (somewhat) be square. I think for any parallel clamps to always be perfectly square, they'd have to be made entirely of quality metal instead of plastic parts. But also instead of tiny little baby notches that get worn down easily, it'd be nice big-daddy notches that are strong and eat their spinach.

[@FredMcIntyre]

Very informative, nicely done Marc! 😃👍🏻👊🏻

[@ctfeet1]

Great review Marc. I've seen these in my local HF and opted not to get them, but after your review I think I'll give them a shot. It seems like you can't really go wrong for the price. By the way, I like your Pork Roll shirt. Used to live in New Jersey and it was all over the place. Now I'm in Connecticut and almost no one carries it. But I miss my Pork Roll!

[@andrewbrown8148]

Great objective review, Marc~! I hadn't seen these yet, but was going to HF to pick up some 6" & 12" F-style clamps for glue-ups. I have others (Jorgensen, Bessey, Craftsman), but at their price point it's hard to say no to for just having some more around the shop. Thanks much~!

[@RayCollins-dv4ts]

Good video and review. Thought it was thorough for a few months time and fair to HF as well. Thanks.

[@ratsalad346]

Excellent review, thank you.

[@timffoster]

Good vid. Thanks. I'll have to pick up a couple.

[@donwight5806]

Love the great variety of tee shirt colors!!!!

[@TristanJCumpole]

Hey Marc - It's worthwhile noting that pressure is not the same as force. I know that we tend to use these terms interchangeably, however there is an important reason to make the distinction. Pressure is the acting of a force per a unit of area. 1000lbs of force through a 2" x 2" pad is 250PSI of pressure....exactly why we use cauls to distribute clamping force for less concentrated and more even application. That "1000lbs of force" distributed over a 2" x 5" glue surface area drops final pressure to a mere 100PSI, which is about the bare minimum for a cosmetically-clear glueline with PVAc in hardwoods, ideally double that. Soon that layup of 100" of 2" thick wood lamination needs these clamps at least every 5" (>20 clamps) to dial in adequate clamping pressure through the joints. By this point for practicality, we're talking heavy I-beam clamps with the rear pad retained by a steel pin, which are usually rated in the order of 2500lbs, plus a nice caul either face to create good overlapping triangles of distribution. The numbers these manufacturers throw around about their clamps are pretty meaningless until you run them and see what they mean in the real world, even then the type of clamp may not function at these values without there being things like scarring on the bar and losses through bar bending, etc. I'm certain that you're 100% aware of this, but thought it useful to voice for those that may not be, especially since those numbers seem more to function as a comparative sales tactic than a specification. For reference, industrial manufacturing woodworker in marine and architecture where these aspects are handled more like engineering than woodworking..

[@mattmorrisson9607]

Thanks for taking the time to do a thorough and fair review, Marc! Even as a hobbyist, I would be hesitant to bring a tool into my shop that I know is a ticking time bomb, though. At this point in my life, I'm ok spending a bit more to get something that I can put my trust in, even if it isn't the top-of-the line product.

[@Taylexwow]

One failure does not equal a ticking time bomb

[@scottmorris4914]

I wouldn’t say it is a ticking time bomb. And really, if one is to break, do we really only have enough clamps as we need? We have more…. And at this price you can buy a spare t leave off on the side if one fails. I have their Pittsburgh squeeze clamps, and they are great. In fact they work better than my Dewalt clamps. I paid under $10 for the squeeze clamps.

[@mattmorrisson9607]

@@Taylexwow No, but in my opinion, that mechanism does to me. To each their own, but I'd rather spend a few more $ on a clamp w/ a more robust system.

[@ewetuber186000]

Excellent review. I bought some of the Bremen parallel clamps a few months ago. I’ve used them a half dozen times. They’re the only parallel clamps I’ve ever used. I love them. But I don’t have a good comparison perspective.