HARBOR FREIGHT MAKES A BOOST GAUGE?!? Only $15!

[@emilfeta5324]

If the gauge has 3 wires one is gnd, second is constant power (for coolor memory) and last one is key on power the turn the light on, if you have 4 whires its for changing brightnes (sorry for broken English)😅 Love you

[@brocktyler2818]

5:28 For guages with 3 wires, the Red wire is for constant 12v power, white is for "switched on". And black of course being common ground (CG). Based on the issue you spoke about in the reviews, a common wiring mistake is the cause. It's hard to see which configuration you attempted in your demonstration. Long story short red needs constant 12v to maintain the memory configuration on the controller board. Similar to when an alarm clock or factory stereo in a car loses power you lose radio presets and other settings. Hook white up to a "switched on" source. Such as tying into the ignition wire on the back of your switch panel. On guages with a 4 wire pin out, Yellow is normally the trigger wire (switched on 12v source) and white would then be T'd into the factory dimmer so adjust guage brightness. Hope this helps.

[@mastafixa]

The likes of boost gauges or other types of pressure gauges are so simple and have been manufactured in such larch quantities over the years that no matter what one you buy they usually work just fine. China has it down

[@applesyo]

That keyboard sound was just starting to kill me lol

[@adieselcotton]

Put a resistor on the led to make it dimmer

[@AutoSteps]

it would remember the color if you wired it to a remember wire. like the radio fuse or a clock

[@notluke8158]

This man over here with the cherry MX blues

[@motoXcR]

the 4 of us that get that reference....

[@harryazzole7814]

@@motoXcR MX BLUE GANG

[@jasonpavlik4904]

put the orange wire on the battery unswitched and out the white wire on the switch that controls the lights for the rest of your dash lights.

[@Tivoliterror]

Thats a weird flex xD like are you suppose to buy a gauge that cost 2500 ? :V

[@xRamRacing]

I mean shit, Greddy has a gauge that looks transparent and is like 500 a gauge

[@zacharybartman6875]

Thanks so much for this video! I go off of reviews as well. But at $15 I would still be too skeptical to bother. Seeing your video has me planning on installing one of these very soon! Seriously. Good look.

[@915Performance]

I use to run one in my turbo volvo worked great! Better then a $40 dllr one I bought at a “tuner shop”

[@alfredojarillo3146]

A resistor can do the work for the brightness

[@eletor]

The cars looking good doggy

[@OffBeatGarage]

Thank you broski 😘

[@LetsDriftMedia]

If it works it works harbor freight FTW 🎉

[@rickyg152]

Bought one today nd the needle is not at 0 its more at 3psi can it be adjusted or should i return it

[@Ardendy]

RB20s make 10psi stock it possibly has an rb25 turbo and wastegate on it

[@kfgreenwald166]

It's a $15 gauge so don't expect it to be of the highest quality. The gauge is not made to be disassembled. I tried and here is what I discovered.The housing is silver and looks to be metal but it's just plastic.The aluminum bezel/trim ring is crimped over a lip on the end of the housing. So to take it apart you have to pry and bend the bezel which is to say....destroy it. The LED light is of the surface mount type. So even if you can get the gauge apart it would be next to impossible to replace that LED.Again...in short, it's a $15 gauge. Just install it as is and hope for the best.

[@mynameisjeff1135]

why da fuq do you remove the ABC on your S55

[@patrykkowalski6]

i want some shirts from whatmonstersdo but they are always sold out :( and they dont respont neither on email nor on fb

[@jaysondj8362]

I just got this for my evo LOL its pretty decent for the price. 20 psi is enough for the tune its on anyway hahaha

[@Dragonfabb]

Why not just get a map sensor lol

[@cancer_stixx]

Surely more 240 vids soon 😥😥 I wanna see more rb20 stuff 💕💕💕

[@theregoesmiller389]

wish you uploaded as much as you use too !!

[@Dracuz123]

Cant rely on reviews anymore. Many of them are fake, especially on Amazon. If there are a lot of good reviews and also a lot of bad ones, the chance of the product being trash is 99%

[@isaiahsaavedra6799]

Yes

[@StabTheDabb]

Do a type x kit on your 240

[@HKSArKz2]

dosent fit with big jonnies. type x fits with 17" stockbody. big wheels = big kit

[@amykeoughdaneshmand9966]

wow 😮

[@umana93]

pls upload more! :[

[@twowheelsnobrain]

i wish he wouldnt act so dumb , and make all the kid voices.. its making my interest go down each time

[@immortal_morty1347]

Then fuckoff

[@immortal_morty1347]

My comment telling you to fuckoff got more likes than your complaint . Says alot

[@MRTuning704]

Nice mines from harbor freight lol

[@MRTuning704]

Omg commenting to soon lol

[@HKSArKz2]

question is why cheap garbage. why not go with something tested and with some quality?

[@CrankingOneOut]

for the lulz m8

[@adieselcotton]

Science

[@SuperWhat0000]

lol also the bois with the budget turbo builds who aren’t trying to overboost their shitboxes can now cheaply find their functional boost threshold