1 Year Later: Refinishing The Tudor Pelagos 39

[@HarrisonElmore]

8:32 Correction: The strap on the Tudor is Artem’s LOOPLESS Strap Black with white stitching found here: tdy.lol/lNQEL

[@explorerjlc1743]

why did you sell this?

[@chiliprepper7678]

I had my Pelagos ETA 2 liner refinished at my Rolex / Tudor AD a few months ago. I did not have any deep scratches but a scuff on the case. Looks brand new now.

[@jwalkerjr]

I've been waiting for this video. Very informative and interesting. Thanks for putting this together. I picked up my Pelagos 39 about a week ago. As you mentioned, it's an awesome all-arounder. There's just something great about a simple three-hand watch.

[@teammacnamara5320]

I enjoyed this. I like the fact you do more than just review watches. For me that’s what separates you from other KZbinrs online, in a positive way. I recently bought the Rolex explorer and I’ve found it tricky to find quality 19mm straps. 20mm is definitely the sweet spot!

[@xenon9887]

A suggestion. You can use a very quick Cape Cod once over to bring shine back to your brushing. People have had good success with this method. The cape cope removes so little metal, that if you just give it a few passes it will shine up without removing the brushing.

[@mahmoudghoneim8004]

I was about to put down the same comment, personally tested on my pelagos 42mm

[@kevco01010]

To fix the nato strap hole issue, give crown and buckle chevron adjustable strap a try. They are by far my favorite and most comfortable strap and being adjustable in length you can dial in your hole positioning. The material is great and also allows your watch to wear thinner being a single pass, but still substantial to secure the watch

[@edrader]

i use only single pass nylon "nato" straps. a true "nato" has no springbar on the buckle and therefore the only way you can lose your watch is if both springbars on the watch fail. maratac used to make the best single pass strap but there is only one place that sells them and supply is dwindling (county comm). another great single pass strap is made by marathon and can be purchased on prime

[@michaelmcduffee771]

These ownership followup videos are sooo helpful. Keep it up!

[@HarrisonElmore]

Glad you like them!

[@EFnChris]

Absolutely! It’s like we grow, and travel with your watches/experiences lol.

[@KaleemLmar]

Really loved the scratch removing with that the eraser and the pen, I'd say it looks very refined.

[@Chrisblau]

I’m at 8 months solid of wearing my Pelagos LHD. I know it’s a different model but I couldn’t agree more with this watch or mine being similar works in every setting. Suite, machine shop, everyday life. Excellent video dude 👊🏼

[@JorgeGee713]

Can't understand the people complaining about not finding a 21mm straps for the 5k watch. Spend a few hundred dollars and get some proper ones, not a big deal at this point lol

[@JorgeGee713]

The other trick is to force in a 22mm strap, again very doable :)

[@drwindsurf]

It isn't that one can't just buy a 21mm Nato, It is that I like to mix and match straps and it is annoying to get straps that can only be used on one watch.

[@jaysterling26]

​@DaKing2369 Indeed: I put on a 22 elastic marine nationale ( not the costly ones) between 20mm lugs.Fits snug & easily adjustable. Don't Tudor sell the bracelet separately..OK , probably for half the watch' s price but in 5/10/20 years time?

[@Touyoujin]

It’s just so stupid to own more than one straps with exactly same design but different width.

[@desireless4092]

I own Pelagos 42 and FXD, 22mm Feelsgoodman.jpg

[@itsallrobbish]

Firstly, that for me is the perfect one watch collection, you were right to keep it and secondly your techniques for refinishing it are spot on. One day, perhaps my wife wil let me get one of these fine watches.

[@ericrichmond8320]

Watching your first video sold me on this watch. I ordered it without trying it on. It's. Just. It. I wanted a perfect black diver and this watch fits that bill. The size is perfect. I love the snowflake and classic Tudor Sub markers, which this is an update of. This is not a down speced Pelagos 500m. I love the 21mm lug width because it gives it a nicer taper vs 20mm and 22mm would be too wide for the case size.

[@HarrisonElmore]

I agree with all your points, but 20mm lug width would’ve been pretty convenient! Hope you enjoy!

[@humblegent4741]

I’ve used the scotch bright on sponges to make stainless brackets look perfect. Just have to take your time and always go in the same direction.

[@jaceprovo]

I would also recommend using a matte polishing stone. This is what a lot of jewelers use. Long smooth strokes in a single direction. Because it has a very wide surface you can make nice consistent strokes across the entire link. It takes out all those inconsistencies you get with the fiberglass pen or the eraser.

[@HarrisonElmore]

Ahhhh I like it. I'll research

[@rzllin]

Well I used a scorch scrub that is made of fine soft metal. Taped it to a drill bit and attached it to my portable drill. Now it’s scratch free with satin brush finish🎉

[@educarmar]

Thanks Bud - followed your indications and you have saved me from some mistakes.

[@RocketDog73]

This video has been the best advertisement for why not to get a titanium watch. Cheers

[@xavious5017]

Having had this watch for almost a year myself; I can say the P39 is amazing, truly the best representation of a modern diver in all aspects. However, as many have commented, the hands have a very noticeable difference in lume quality. This is clearly apparent at night and is disappointing compared to my BB Pro (which uses the same lume blocks). I have spoken to my AD and they will be replacing the hands soon, when I hand in for service, and hopefully this provides the fix needed to make it 100%! Also, in regard to the dullness with the FG pen; you could try a quick polish though with a Cape Cod cloth (not aggressively, which will remove the brushing effect) to bring back some brightness. This has worked well for me when I refinished part of my P39 bracelet.

[@ih6901]

Will the re-lume of the hands be on warranty?

[@xavious5017]

@@ih6901 That is a possibility from I've discussed with the AD, but still to be confirmed

[@jayjayhooksch1]

​@@xavious5017 did you get your lume situation resolved? I'm looking at this watch as potentially my first luxury watch. This lume issue (and a little bit of worry about titanium scratching easily) are my only concerns.

[@rzllin]

Just found out earlier today, I used the Timberland Eraser that’s for cleaning stains on your timbs. But works also to refinish your pelagos.

[@HarrisonElmore]

Great tip!

[@JasonTheWatchGuy]

Artem straps are insane quality! Yes they're more expensive than the average but absolute quality!

[@jackarnold3290]

How much did the sail cloth w/clasp cost please?

[@DBR6464]

I really like my Artem strap on my speedy. I think an all black one would look even better on the Pélagos. Nice video

[@HarrisonElmore]

Nice! That would be a good combo! Enjoy and thanks!

[@laurentgagne892]

i think you did a fantastic job for that little tool watch

[@Jay_Bee1]

I like the podcast type of video, brings a casual discussion vibe to a great video, keep it up

[@HarrisonElmore]

Thanks! Will do!

[@ajgross67]

If you are looking for a nato-like strap where you don’t have to worry about being in between holes check out Nick Mankey’s hook strap. They have infinite adjustability, don’t have any fabric under the watch head, and are stretchy where they are super comfortable. My only big gripe is his current lead time is ~14 weeks, although supposedly he hire some additional staff to help him reduce lead time. Otherwise you could look at Erika’s for similar benefits although for about double the price

[@JLUnit416]

Almost perfect timing; I put the deepest scratch, so far, on the inside of one of the end links last night, while ironically putting on some protective stickers. I've used a pen eraser before to remove some light desk diver scratches from the clasp, but I haven't gone as far as to try a fibreglass pen, which I've used on stainless steel before. I like the putty idea to hold the link in place, I'll try that next time around.

[@edipisreks5535]

Red scotchbrite is the way to go for brushed refinishing. Anyway, if you don’t like titanium for scratches, wait until you get some gold watches. It was an eye opener to me when the inside of a dress shirt obviously scratched my watches. Having said that, I only buy precious metal watches now.

[@canadianwatchmonkey3992]

I will start with a dremal but always finish off by hand using a pad. Always keep straight lines and in one direction for best results.

[@WH-hi5ew]

Its a great watch... I really enjoyed the watch when I tried it on at the AD... only it's lacking a date. I think it's Tudor's best watch though... despite the 21mm lug widths.

[@HarrisonElmore]

Totally agree

[@Rothmore]

Nicely explained and a really good pace. Thanks

[@Mateus_fi]

You have made a very nice and useful video; excellent work!

[@cesarcesar5129]

You did a great job refinishing.

[@HarrisonElmore]

Thank you!

[@yitza2698]

Hey, great video! Just curious how the case is holding up for you in terms of scratches and dings.

[@drwindsurf]

I use Scotch Brite pads and move the bracelet along the pad and have had good results - although it is time consuming. I really like the tips you suggest here and will try the fiberglass pen. -Thanks

[@wheelsandwatches]

Good video. I have used scotch brite to good effect but used a method you used with the fibre glass pen. As the pad softened the finish it provided improved. I used the grey pad.

[@Walevolence]

wait, the new clasp is titanium too? i was under impression it is stainless steel like the 42mm versions

[@trubadyr99]

Your video is good and useful, man. Thank you. The replacement straps you've shown are good. But there are straps out there which have bent ends. I like when a strap fills that gap near the watch case and there is not that much space there in that place.

[@kristofferglennpfalmer4751]

Very insightful. Thank you.

[@frankradisch3652]

Great video Harrison! Thanks for sharing.

[@HarrisonElmore]

You bet!

[@Dialandhands]

Uncle Straps aka uncle seiko has come out with a jubilee and president bracelet, with or without a clasp so you can use the stock clasp.

[@HarrisonElmore]

I’ll have to check that out!

[@Dialandhands]

Some people have already got their hands on the bracelets and they look great. I personally haven’t bought one but I have the half link Larry sells and it’s great! Definitely helped the fit with the bracelet on my 39.

[@Bisley1]

@@Dialandhands Isn’t the T-Fit on the 39 enough to get it the perfect size? I would have thought you wouldn’t need half links anymore.

[@mjdm1925]

I have one and you need half links even with TFit

[@tbg7053]

What I think is that I would never refinish a toolwatch, looks cool with scatches it! Interesting stuff tho!

[@Johnny641]

While I do like the look of the 39 I let my go after 6 months , not a fan of the Ti unfortunatly , I dont mind wear and tear but the Ti unlike steel looked plain bad as opposed to a nice wabi IMHO. I also found it marred up very easily compared to steel. For re-finishing I found an anodized aluminum polishing block worked perfectly and left a factory finish. I already had one from a company called monster tech based in Germany.

[@dissident_mantis7]

I got rid of my pelagos when I realized that Titaniun (especially grade 2) is not capable of having the longevity that a stainless steel watch has. I work in a machine shop, my grandfather worked in a machine shop. He wore a rolex op from 1953 until the day he died in 2006 in a shop, and it still looks beautiful and can be polished up to look brand new. My Pelagos after 3 months had chips on the bezel knurling and deep scratches that will never be buffed out. I opted for titanium because I work with titanium, but I realized quickly that it is vastly inferior to stainless steel, at least the stuff that Tutor is using.

[@BrokenClock2U]

Question: you work on titanium in your shop & didn’t know what grade 2 titanium will become? What about grade 5 like the Yacht Master?

[@RabbitWatchShop]

@818to510😂 hilarious. Also, you can get a replacement bezel. Who cares about scratches on a tool watch

[@itsacookie1]

Fun fact, if a metal is softer and "easier" to scratch it will also be harder to chip. I'm gonna say this story never happened.

[@darkscience1466]

Titanium is more resistant to corrosion than stainless steel. What you really meant to say is that for your line of work, a steel watch is the way to go.

[@ChocoIatx2]

The NTTD OEM from omega is what I normally wear my P39 on as well. I also have a artem strap and their deployant looks and feels exactly the same as the one from my omega SMP300

[@josehidalgolopez4520]

Thank you for this video. I have purchased the Pelagos 39 and I think I will buy the Artem strap you have. I like it. I have one doubt. Should I buy it with the standard bar or the quick release bar? There is very small difference in cost. What do you advise me to do? Thanks a lot!!

[@Kbo513]

Funny I just purchased an Artem strap last night for my BB Pro. I’m hoping this one fits better than the Tudor OEM Hybrid rubber strap. Not a fan of the strap being the opposite side with the Tudor claps. It’s a unique look, but if your wrist is around 6.5in there might be more protruding extra length in the front.

[@grahamstenson8571]

Great video and really interesting as I have just got a P39. Which Artem colour did you get - black & white stitching or grey stitching? It looks a perfect match. Thanks

[@roelvandenbergen611]

if you like the idea of a nato strap but like it snug maybe an Erika's original is a good option. I wear my two liner Pelagos on a EO connery and that's a beautifull combo, for more formal situations i put it back on the bracelet.

[@HarrisonElmore]

I’ll have to check those out!

[@ncprime9447]

You need to get the Marine Nationale style straps from Erika’s Originals. I felt the same way as you about NATOs and these MN straps are incredible.

[@HarrisonElmore]

I’ll check them out!

[@arnovda9479]

Looks like new, good job 👍

[@HarrisonElmore]

Thanks 👍

[@sreed556]

The extra gap in the fit of the strap is not recommended as a 'snug' fit can put pressure on the pins and with the extra space can pop off the watch. it would be much better to get a larger size strap.

[@theenavybluemonster]

You should check out Erika’s Original MN straps. Single layer strap with infinite adjustments. You can get a perfect fit.

[@johnlubbad6205]

Have you got link for Fiberglass Pen? I am not seeing link.TIA

[@Watch_Papa]

Did you sell this pelagos? I was back and forth between this and my no time to die for a titanium diver. I wound up going with the omega but still think about the pelagos. Thing the nttd is a little bit more interesting but the pelagos more classic tool watch

[@dre5890]

Could you let me know which fibreglass pen

[@jayjayhooksch1]

Did you consider sending it to Tudor for polishing?

[@johnpinkerton772]

Use a 3M polishing pad with fine grit. Minor scratches cab be removed with a pen eraser. Simple.

[@JackMcClauren]

Did you clean the watch before recording the end result clips? Looks like it's got fingerprints and metal particles all over. Makes it hard to see the before/after differences.

[@lrbrown]

Look at you with sponsors!

[@HarrisonElmore]

Right!

[@Nom_AnorVSJedi]

What do you think of the Seiko SJE093 ??

[@b_altmann]

Quite brave to do this on a semi-expensive watch. Fossil also made a titanium watch a while ago (cost £330). That would have been grade 2 as well

[@mikaxms]

I prefer the previous setup to be honest; without the headphones and microphone in your face. It just feels more personal. Did you also get a different microphone? There is a lot more popping in the audio. Maybe a pop filter would help?

[@lemao7688]

Good video to watch.

[@HarrisonElmore]

Glad you enjoyed it

[@solefreak2]

Is it difficult taking off the bracelet without butchering the lugs?

[@darkscience1466]

Yes

[@bookofmillions]

Buy an MRG B5000 man 🎉 and go #Wild ❤

[@aussieexpatwatches]

Isn't the clasp steel?

[@rasmuslundberg5881]

also interested in this

[@jackarnold3290]

Where would I sell a watch? Thanks

[@whatchamatcha]

When you wear your tropic and artem straps snug, does it leave marks on your wrist?

[@HarrisonElmore]

It can sometimes. Depends on how much my wrist swells if I’m running or something

[@chrisngein]

Does anyone have any experience polishing grade 5 ti?

[@khyoon14]

you need to go higher in grit for your dremel.

[@Ferien7]

Boring is best for an all purpose watch

[@DJbabynoneck]

Good video. But refinishing a watch after 10 months is completely unnecessary.

[@murrayalex4843]

That utterly stupid fold over lump on the NATO gets me every time, looks ridiculous

[@vallmak]

i do the same thing

[@HarrisonElmore]

Nice!

[@super1million11]

My complaint with this watch is that they down graded the WR on this model. I understand not doing a 500m WR like the full size watch but they could have at least gone with a 300m WR on this.

[@berserkkw]

That whole talk about NATO straps.. yeah, phrasing...

[@PoltergeistWorks]

If you care at all about the value of the watch - don't do it. You can mess it up very easily, you'd be surprised how easy it is to round some edges of the metal, change the crisp lines of the original finish. ESPECIALLY when it comes to the case. Just look at the value of unpolished, untouched 20year old ROLEX watches vs butchered and overpolished. If you really want a full refinish send it to the factory and have them do it professionally.

[@pointblank722]

You are torturing your watches it seems.

[@HarrisonElmore]

I don’t try to!

[@Neyo12135]

dont do it

[@hazlitt1]

If you are having to think about polishing out scratch marks before you’ve even bought the watch, you shouldn’t be buying it. I just changed my mind. I will not be buying it.

[@Billeh556]

Does anybody know if this fiberglass pen works also on stainless steel?