Hatsan AirMax .25 Air Rifle (Review) + Accuracy Test !! - DOUBLE Bottle PCP Airgun - SETUP Guide

This video is an introduction, overview, and user's guide for the Hatsan AirMax .25 PCP air rifle, pellet gun, airgun.
AEAC's Primary KZbin Channel: / svscialli
DISCLAIMER: This video is meant for educational & documentary purposes only. All work on airguns and airgun accessories should be carried out by a proficient licensed professional. Airgun Exploration & Advancement Channel nor KZbin will be held liable for any injury or damage resulting from attempting to duplicate anything shown in this video. Airgun Exploration & Advancement Channel is not an airgun store. We do NOT sell airguns, airgun parts, or airgun related equipment. Airgun Exploration & Advancement Channel is compensated by KZbin for its content creation. By viewing this video, you are acknowledging the contents of this disclaimer.

[@cliffb.2416]

Nice shirt Steve! Great video, looking fwd for the range video on this gun. Also, can't wait for the reviews on the Hatsan NovaStar!!!

[@Andrew-ut1yv]

Steve, first off, you're a class act and I enjoy your videos and candor immensely. I agree that the existing Hatsan QE baffle components are not efficiently lowering the report of our airguns. I researched and purchased a 3D printed baffle to quiet down my Hatsan Flashpup on Ebay. You can search "10-Stage Vented Baffle for Hatsan". I'm not affiliated with the seller, I just wanted to let your followers know what I found. I was using an aftermarket suppressor attached to the end of my Flashpup with the stock Hatsan QE baffle setup. After inserting the 3D printed baffle into the existing shroud, I've removed the aftermarket suppressor and the gun is comparably quiet. Thanks again for the content you produce, all you do for the airgun community and your tributes (SMWA) to the men and women in the armed forces and first responders.

[@joecamel2236]

I have the flashpup and bought the exact same baffles, they do work great!

[@marcegrecco53]

You’re the man, good review. I really like Hatsan air rifles. Powerful and accurate air guns.

[@kaylamarie8309]

I just bought this gun in .25 cal from Pyramyd Air..absolutely beautiful gun! I have several of the Hatsan guns to include the AT44-QE in .22 and the BullMaster in .25. I took the adjustable cheek piece off both the BullMaster and the Airmax and it helps proper cheek placement a lot without too much or really any discomfort. I really think it makes the guns look better as well. Anyway, I did not exactly start out as a fan of the heavy Hatsan guns but that has definitely changed! They are among my favorites in my collection of air rifles and powder burners.

[@kevinnielsen1356]

For offhand shooting a heavy rifle is preferable. The Airmax has a near perfect balance for offhand

[@phillipmendiola1257]

I have a the 22cal Hatsan Air Max it's deadly accurate shooting HN 5.5 mm barracuda match domed 21gr 935 FPS and the 16 gr H&N TERMINATORS at 950fps , about 70 to 80 shots per fill it's my favorite sit in one spot and snipe all day , it is a sweet pcp for the price , I also have a 25 bullboss another very accurate pcp .

[@heithwatkins]

Thanks brother. I just got this. Better late than never. It looks real similar to the Kral puncher knight. Can't wait to see the full review. God bless you brother.......I think this rifle brings alot of value to us. Iooks good. High shot count. Great power. You can use this for everything and not break the bank. Just buy the Flash Pup as well incase your planning on carrying it all day and hunting offhand.....We can never own enough guns. That's why I love these prices.

[@IzaelLealairguns]

Steve this Hatsan is show! I have a custom 44 at 10 with 0.38L cylinder, regulator valve of 1800 PSI, and over-pipe with integrated suppressor! hehehe .... another great video, my congratulations ... strong hug my friend.

[@DuvalierMusic]

I purchased one in .25 and I’m totally blown away with it. I’ve tweaked it, removed the QE Shroud and added a DonnyFL SUMO IN .30 so it won’t clip and it’s a quiet beast hunter. A Huma regulator is soon to be installed for further experimenting. Thanks to your review I NOW FEEL LIKE THE HAPPIEST AIR GUNNER IN TOWN to own one🤣😂 Keep up the good work, Thanks 👍

[@kevinnielsen1356]

With the regulator you can fill to the bottles 300 bar rating

[@heithwatkins]

After 2nd thought. Mabey Hatsan should include this video with every United States purchase. People need this information. Especially the 6 pound trigger.

[@aeacvlog2033]

Manual shows y'all how... just start with screw 3, haha. Steve

[@kevinnielsen1356]

It's adjustable. What?

[@uzumlubay]

I am getting a similar spread out of my Nova Star but this has been slightly detuned to just over 900 fps in. .22 using JSB 18.13. As you said Hatsans generally run a bit hot. Robert Lane is releasing a new regulator next week and at the moment I am in 2 minds as to whether it is worth considering. Although longer at 43" it does weigh less at 8.4lbs and I have got trigger down to about 1lb4oz. Generally it is taking 1-2 years from release here in Turkey before it gets to you in the States and over that time Hatsan make a few tweaks to improve them.

[@gnjack6]

I really enjoy my airmax its very accurate and I don't mine the weight. Great video I am going to try and adjust my trigger also. Thanks for the tip.

[@airgunnersedge4061]

To improve the trigger feel you also need to clean,debur and lube that linkage set up, huge difference in mine!!!! Then tuned, debur and polished trigger...

[@phillipmendiola1257]

Awsome presentation ( STEVE ) I am glad your reviewing the Hatsan air max it's a great pcp

[@airgunnersedge4061]

I bought the airmax refurbished sometime ago and after a tune & regulator I have to say this is my most prized Hatsan for power and accuracy!!!! It has a weird Appetite for AA 16gr at 960fps, 100yards at or under 2inch group with 10 shots.. This gun is actually balanced very well for a tank ,but usually shot on a rest for a long target session on one fill !!!😁 By the way thank you for someone finally doing a review on this gun it is way over looked!!!

[@aeacvlog2033]

That was all Hatsan, lol. They sent it requesting review 👍. Steve

[@tobeysdonutshop8251]

I have the AirMax in .25 cal and one of the first things I did was take off the cheek rest and glue on a piece of 1/8" neoprene in place of it. The first thought that came to mind is that the adjustable cheek rest should have been mounted on the other side of the stock which would allow you to get your face 3/4 inch closer to being in the right position. Hatsan claims this is a choked barrel so I tried slugs through it without much luck. I get better accuracy with diabolo style pellets. I cleaned the barrel when I got the gun and removed a lot of factory crud and then dry swabbed until it was clean, but the groups are only OK at best, 3/4 to 1" CtoC at only 10 yards, which is maybe acceptable for small game but not what I'd hoped for. Maybe the barrel needs some break-in time? The shot count was good and as advertised.

[@joedokes8641]

Nice video Steve. I have the Gladius long in 25 caliber and i shoot it left handed. The mechanism is the same as mine.The riser does seem to be hefty right handed. It is outfitted with a bipod and a Hawk 6.5x20 x42mm side focus with a one piece mount. I have the included sunshade installed with a total length of 20 inches just for the scope. So mine is pushing 12 pounds plus. And yes i have carried this out hunting . It is very heavy and comfortable to hold. I have never cleaned the barrel . Pulled it out of the case and started shooting. Less than 5 rounds to zero ( very easy). It loves the JSB 25.39 grain pellets , never tried another brand or weight as of yet. Very accurate. The weight although cumbersome make it easy to hold on a target. Most of weight is in the butt section. I don't need a gym membership with this gun.

[@stevebridges9033]

I just bought a refurbished AirMax from Hatsan ( they really have great deals on refurbished stuff ) and I am really amazed at this PCP rifle. it hits hard, you can feel the punch when you fire it, of course it is not heavy recoil but it is definitely more recoil my Blitz, M-rod, or Umerax Origin. where it is a heavy gun I like the way it shoulders, it has a solid and sure feel. I like the comb and I am using standard scope mounting rings, but that is just me, I am using it with the bi-pod right now after a 4 level Cervical spinal fusion. I love this gun in .25, I would feel comfortable taking it rabbit and squirrel hunting and it would certainly be a good nuisance possum and racoon killer.

[@gumbystown]

I know this is an old video you've done but I just wanted to point out if you're a left-handed shooter the cheek rest is perfectly placed on the left side of the gun and with the right side forward cocking it's excellent

[@AEAC]

👍 thank you 😊

[@terrencepalmer2948]

Hey Steve I have the AirMax in .25 cal. My AirMax shoots the H&N Hornets. They are a bit too long for the mag though. After loading I sit the mag down on the counter and press down to make sure the tips are not poking out. I can get a dime size hole with the Hornets at 25 yards. It also has a great pattern at 50 yards. My next favorite pellets are the H&N barracuda's. They're very accurate as well but the Hornets are much better. In fact they're better than the JSB's in my gun. I also bought one of the 10 stage baffles from eBay as well as a suppressor and bipod. Now it's very backyard friendly, however this thing is now very heavy. I don't even attempt to shoot it standing up free hand. I only shoot it with the bipod. I agree with you in regards to the value of this gun in the price range. In my opinion no other gun can compete with it at this price. I just wish the air bottle was removable.

[@LukaszMotta]

for long pellets like predator polymags & H&N use single shot tray...3d printing

[@retepeyahaled2961]

Glad you mentioned that the Baracuda pellets do not feed well in .25 cal. Even if you load the magazine perfectly, the pellets will creep forward after a few shots and block the rotation of the magazine. The same problem occurs with the other Hatsan guns that use the same magazine; the Bullboss and the BT65. The BT65 is a heavy gun with a heavy side lever, I accidentally jammed the rotation mechanism because I did not notice the Baracuda pellets blocking the rotstion mechanism. That being said, I love my Hatsan guns (Bullboss and BT65), because they are accurate, powerful and reliable.

[@AEAC]

👍😊

[@ronchambers7972]

Great looking "bench" rifle. With that barrel height might fit a CF bottle. I'm hoping someone tinkers and adds the regulator up close to the bottle thus utilizing the air tube as a large plenum space for staging regulated air. The palm swell looks comfy. Looking forward to seeing the 50/100 yd review.

[@airgunnersedge4061]

Already put a huma .25 regulator in my .22 airmax for the larger plenum, full tune and an amazing gun !!!!

[@airgunnersedge4061]

My KZbin AIRGUNNERS EDGE, Now trying to promote my KZbin channel just offering info

[@ajmnuisanceanimalcontrolll3895]

I have a bullboss and it has an added moderator. I have 2 extra air tubes and I really like it for shooting pigeon, crows and groundhog. I have regulators and get about 42 foot pounds and 24 shots per airtube. That being said, the extra 2 lbs is sort of bad but 85 shots is a big plus especially if you shoot slugs and sniper shoot multiple targets instead of stalk and shoot at one animal.

[@Don.E.63]

Great overview Steve, I like it, I do wish it wasn't so heavy but a lot of my shooting is done off some sort of bench or prop (bench for target) (prop from a blind) I like the power and shot count also, thanks for all you do!, Don

[@kevinnielsen1356]

The Airmax is a perfect specimen for a regulator. From the factory the pressure charge is limited to 200 bars due to the rifle tune. The bottle on the airmax is rated for 300bar, with a regulator installed the rifle can be filled to 300bar.

[@bluewater454]

You are right. This doesn't sound like a trudging-through-the-woods-for-grey-squirrel rifle. It would probably be more of a find-a-nice-comfy-spot-on-a-grassy-knoll-to-wait-for-a-wood-chuck kind of rifle for me.... which means long distance shots of around a hundred yards, so it had better be sub moa at that distance. You get one shot at the wood chucks in my area, and if you miss, he's in his hole for the rest of the day.

[@aeacvlog2033]

Good chuck rifle for sure 👍 Boom! Lol

[@sethnaber9006]

Steve that's exactly what I did with my bullboss, I took that cheek peace off. Its basically the same gun

[@syedhidayatshah2319]

I'm a dying heart airgun fan I love hunting with pcp airguns this is awesome review

[@kaylamarie8309]

Probably my very next airgun purchase :-)

[@maciejl.eonhard]

I was born in the 70’ and I almost forgot about The Goonies ;-) thanks for reminding Steve.

[@aeacvlog2033]

Haha! They've been playing on TV a lot here lately 😄

[@jason3064]

I'm either getting this or the Hatsan bully. Great review 👍🏽

[@Jesusreyes-in6xi]

Get the bully!!! It is a war tank!!! I have one in .25 love it

[@jason3064]

@@Jesusreyes-in6xi I was leaning towards the bully lol

[@wmnapier]

At 10.8 lbs I think it needs to be heavier?

[@jeffshannon5410]

That's why I love Hatsan Steve because they deliver quality! Great video

[@toddolatheks.1328]

I m digging the t-shirt!! Awesome video great production..... Thanks 🙏

[@justinmakesrepairs4535]

Great review, thanks for all your in depth research!

[@lenweber7142]

I would luv to know the numbers of just recreational bench shooters and the backyard , Hunter tinkerer pesterers,

[@shield400]

In my opinion bullpups have transformed within the past couple of years into a gun that really shouldn't be referred to as a bullpup. There needs to be more criteria other than just having the action and magazine behind the trigger to be considered a true bullpup. A length, weight and smaller overall frame requirements being a few of those things. I mean look at some of the bullpups out today, they are practically muskets.

[@unclebuzz6913]

ANOTHER AWESOME JOB STEVE. I HAVE HEARD HATSAN'S CUSTOMER SERVICE SUCKS..SO IT COMING FROM TURKEY,HAS PUT THE KYBOSH ON IT,OR HAS IT .ALSO I HAVE HEARD THE "OLDER" HATSAN AIR RIFLES WOULD BE FINE FOR A FEW WEEKS OR MONTHS THEN GO TO HELL IN A HAND BASKET.. STEVE WHAT DO YOU KNOW ABOUT THESE CONCERNS ,ARE THEY VALID? I AM NOT YELLING I CANNOT SEE AS WELL AS I USED TO. GOD BLESS YOU ,YOUR FAMILY AND HOME

[@aeacvlog2033]

Hatsan USA tells me they've had no issues with getting product here and that that this has been a hallmark year for them. I too have read of a few CS issues here and there but most of what I see is all positive. On AGN there were a couple of consumer complaints of poor reciprocal communication but when Hatsan published their return emails on record, that shut things down pretty quick, haha. I wouldn't worry to much about it. They're accessible. Steve

[@unclebuzz6913]

@@aeacvlog2033 THANX

[@jay1486you]

What bipod are you using?

[@heithwatkins]

Where else can you buy? ???? Iam betting the Kral puncher kight. Also it has the ability to change caliber.

[@aeacvlog2033]

Can ya help confirm the challenge? Looking for something more concrete that "I'll bet." Many thanks. Steve

[@heithwatkins]

@@aeacvlog2033 Ok. The Kral puncher kight will kick the Hatsans ass.

[@slem375]

Hey Steve are you going to do a review on the Hatsan Novastar??

[@aeacvlog2033]

Yes. It's at home and in the queue 👍

[@slem375]

AEAC Vlog super cant wait

[@aeacvlog2033]

@@slem375 If ever you want to know what's coming just visit my website aeaconline.com

[@slem375]

AEAC Vlog Will do!!

[@liquidsteel]

I think cleaning up the action to make it compact, keep the woodwork. Shortening the barrel another four inches .and bringing everything forward another 4" will wash out the the shortening by feel anyhow. And that super high scope rail needs to go for sure .

[@brandongowin6454]

I have the bull boss iv bought a regulator to install and it’s hard as heK to do what you tube videos doo I’m not sure if this gun your reviewing has on cuz the 85 shots is a dream for me

[@brandongowin6454]

And all mine is heavy with the scop and stuff

[@brandongowin6454]

Also I bought a athlone 6 by 24 and the cheek thing is a good point in I feel like me eye hold on the scope shouldn’t be this uncomfortable

[@alejandrovelasco7749]

The kral puncher pitbull has a 755cc dual air reservoir

[@aeacvlog2033]

If ya could, please help with the question I posed... "does it achieve 85 shots at a 43 fpe average with a 33 fps extreme spread?" So far, nobody's been able to answer that challenge. Thanks, Steve

[@boxcartwilly]

Great review Steve. I think it is a very good looking gun and when you take the price into account well maybe it might be worth buying a small pair of ear defenders. Nice gun 👍😎

[@AEAC]

👍😁

[@AR-uj3js]

Hey I'm deciding between this or the bullboss but concern about the quietness which will be better and also powerful

[@MONSTER13579603]

Cornelius RSA New to airguns and I am looking for a very good and +Accuracy airgun. I have the Hatsan in mind and I don't witch one to buy. Do you think the Hatsan AirMax .25cal is the holl package, I mine All in one ?

[@AEAC]

Being almost 5 years old now, this video is quite dated. I'd go with their Factor RC. Best, Steve

[@cyrusandreasen9944]

You should check out the AEA challenger .30 cal bull pup with the 32 inch barrel.expeirience the 165 foot lbs energy with a couple of Mr hollowpoints 82 grain slugs

[@AEAC]

I was eyeballing the 9mm at EBR last week 😁

[@ericbanes873]

The regulator from Hatsan has to be an H series only not the AT44

[@six7163]

IM LOOKING TO BUY A PCP BUT IM NOT SURE IF THIS ONE WOULD BE WORTH THE MONEY

[@stkgaming5972]

is that gun a hatsan omg i love it and it look soo good waww thank you steve love you 🤗🤗

[@stkgaming5972]

thank you soooooo much steve for the like love you 🤗🤗🤗

[@lovetheoutdoors9485]

I've been a Benjamin guy. But Which will be better for everything. New Benjamin Marauder synthetic vs Hatsan air Max or Hatsan bullboss? I seen on a post that the Benjamin pushed 50lbe..

[@nealleseberg2236]

In 25 cal you can adjust the air max to 50fpe or close. It will cost you some shot count. Check out the southern gunner channel. He's running his bullboss at 52fpe, same gun without the bottle.

[@hunter_abc_3235]

Can you leave the air rifle at full charge for a long period of time

[@AEAC]

Yes

[@xaviermartinez774]

So basicly a bullboss with a bottle

[@lenweber7142]

Great review info :-) :-) !! You would think they would get ten peoples input before saying here it is..Lol. they need a slap an engineer day lol..

[@aeacvlog2033]

Hatsan's never been afraid to experiment or go their own way and they sell a TON of guns, lol 😎

[@zhingonizuka5537]

Hi Steve, thanks for great reviews. I owned several Hatsans so I know they are powerful tools but the barrels always very dirty and that I have to work hard to clean them all. I couldn't think of any other air guns quiet close to this frankiestand but may be some of Evanixs come close except the discontinued Rainstorm (super good gun!) I have few bullpups including Hatsan Bully so this one is about same weight class. I must say I'm sorry Hatsan but I won't buy this one due to the complication and erroneous of the product. I'm kinda hoping Hatsan would come out with something like Vectis style semiauto in .30 cal regulated with carbon fiber tank then it would be SUPER GREAT!! Keep up the good work Mr Steve.

[@aeacvlog2033]

For me, some arrive coated in heavy black goo and others pull clean in just a few patches... no rhyme or reason to it from what I can tell. Steve

[@willwillis2381]

Love your vid Steve. Had any energy drinks lately? Hey, sorry I missed the giveaway but hats off to ya for the veteran interest. I'm a ex Navy saturation diver and always willing to help Wounded Worries and Healing waters guys make life better. I'm OK with the added noise and like the punch. I'll work out the groups, that is if I ever get one of these. Looking serious at this piece. Thanks, and keep up the good work👍.

[@aeacvlog2033]

Haha, no way. I cant do caffeine... I make gobs of it naturally 😄. Sorry ya missed the Memorial Day SiMWA... it was a biggie. If ya subscribe to AEAC Home and click your notifications bell, you wont miss anything anymore. We'll have another one in a few days. Thank you for your service. Steve

[@hpqz]

I wonder how long that thin wood integral trigger guard will last ?

[@korybrown121]

What bipod are you using

[@sergiopaguaga1540]

What about slugs? Does it shoot them without problems?

[@AEAC]

Video wad made June of 2019 before most slugs had become available. Sorry. Steve

[@murdoch451]

Try the kral puncture breaker s. David UK.

[@aeacvlog2033]

I've reviewed this for y'all 👍. Steve

[@TheMwarrior50]

I dont think ive seen Steve this clean shaven in awhile lol

[@aeacvlog2033]

Haha, heat will make a man do crazy things 😊. Steve

[@adriancox-thesantjordigolf3646]

Nice report Steve.

[@kaylababson5098]

As I said earlier on my other yt account, this is my very next airgun! :-)

[@JohnWaltermire-w2r]

How do I get on the airmax forum?????

[@robertguzman4075]

Hey Steve you got me confused on the trigger numbers you said not to go by the manuel that screw 3 is one and screw 2 is 3 so 1 is two????please help i need to ajust my tigger it is hard to cock. thanks Steve.

[@AEAC]

Hi Robert. I don't have the gun anymore buddy and it's been a few years. I'd reach out to Hatsan and inquire as they may have made corrections since. Steve

[@robertguzman4075]

@@AEAC Hey thanks Steve will do and keep up the good work you keep us air heads going lol

[@AEAC]

@@robertguzman4075 👍

[@gnjack6]

Hey I got mine for under $500 new.

[@Don.E.63]

Where did you get it? Im in the market for one, thanks

[@user-ev3xm7np8x]

BlackJack yeah where can I get one for around $500

[@Valkarons]

Don E Same

[@markpaulnarciso9624]

How much that airgun?thanks

[@davidedwards2868]

Wow what a price.👍👍👍.a lot of gun.

[@luxebioticsbyemdglobals5002]

Hi may i have your opinion for .177 air max?

[@AEAC]

Buy heavy pellets.

[@cjnev9618]

Nova liberty wooden stock? Looks rather good for very little money 😉

[@jellywaltz6334]

Can a 580 cc carbon fiber bottle be fitted on the rifle?

[@nealleseberg2236]

Check out airgunners edge utube channel, he put one on his.

[@CobosDoesItAll]

Can you hand pump this with a Hill pump?

[@tonybrooks9087]

any hand pump that goes over 3k psi would work fine for it. definitely a bit of work to pump it up by hand but thats how I do it

[@ihsanjamali2615]

Great video as always... can u kindly do a review on Vulcan 2 ( .22) from AGT. Best regards.

[@aeacvlog2033]

Been working on it. Progress with Vulcan is slow. Steve

[@michaelfoxfoxster469]

You could cut a foam swim noodle down and use it to rest your chin on.

[@CobosDoesItAll]

Could I hand pump it?

[@vonguyen6670]

How much is that implant?

[@harrygmarshall5157]

Would it not work o k for lefty

[@tongpiguite7170]

Can you please tell me the price in Indian rupees

[@kenlumhemang7654]

Steve, let us be honest, Hatsan usually build quality is not refine at all, just look at even that shaky side lever cocking

[@aeacvlog2033]

I feel like Hatsan makes a good product that's offers a lotta value. With added refinement comes dollars and the air gets awfully thin up there. Best, Steve

[@duanehopland7506]

What cal.does it come in?

[@AEAC]

depends on your local market, I'd google it there. Steve

[@duanehopland7506]

@@AEAC should depend on what cal.'s Hatsan makes it in :)

[@adrianjezierski8093]

Hey, the gun became more cheap but only comes in 4,5mm now in my country... Is 4,5 still worth it

[@nicirwankurd5535]

Nice 👑

[@Gunner-ll1zd]

Good video. Too bad unlike kral they didnt make this a multi caliber.

[@aeacvlog2033]

Here in the States they can be had in .177 and .22 as well as .25 Steve

[@toddeftsadams5909]

The ground dwelling rodents living out behind my house in Southeast Wyoming would be bummed out if I had that gun. I shot 54 in 3.5 hours today with a Umarex Gauntlet. 25. It needs a bigger tank and more magazines.

[@nekeke1]

👏👏👏👏👏👏👏👏

[@nealleseberg2236]

I bought this rifle because I'm a lefty.

[@back2backjack1]

Steve: I have owned this this rifle for over a year! I bought it when it first came out. $679.00 from PA. I HATE IT, Would make a nice boat anchor. TRIGGER horrible.. Weight, about??? weigh too much. I took it out of my safe hopping someone would steal it.

[@aeacvlog2033]

Try AGN Classifieds 👍

[@rollandkakihari7990]

Indonesia 👍🤝

[@GovtWatchdog]

No mention of safety

[@korybrown121]

What my part is that

[@skipcampbell239]

nice looking rifle,but too heavy!

[@stevestinnett6777]

I’m saving my $$$$................

[@gnjack6]

I got mine from Pyramidair

[@duanehopland7506]

Leave the bipod off.Be great for rabbits

[@markmtbrider]

Poor man's RAW. Bench or prone gun, shooting steel 25 to 200 yards if the accuracy is there or prairie dog tool .

[@aeacvlog2033]

I think that's how I'd use it too. Even off the back deck, it'd be great 🤙

[@BoggWeasel]

Everything but the kitchen sink PCP,....

[@DylanJones-zc1cz]

That auto safety though.. annoying..

[@MRunar007]

if not semi auto, il pass