Hatsan Flash Pup .22 Air Rifle (Review) + Accuracy TEST - SPARK 4,500 psi Airgun Compressor - PCP

This video is an introduction, overview, and user's guide for the Hatsan Flash Pup .22 PCP air rifle, pellet gun, airgun... and Hatsan Tactical Air Spark 4,500 psi airgun refilling compressor.
AEAC's Primary KZbin Channel; / svscialli
DISCLAIMER: This video is meant for educational & documentary purposes only. All work on airguns and airgun accessories should be carried out by a proficient licensed professional. Airgun Exploration & Advancement Channel nor KZbin will be held liable for any injury or damage resulting from attempting to duplicate anything shown in this video. Airgun Exploration & Advancement Channel is not an airgun store. We do NOT sell airguns, airgun parts, or airgun related equipment. Airgun Exploration & Advancement Channel is compensated by KZbin for its content creation. By viewing this video, you are acknowledging the contents of this disclaimer.

[@ral446]

I love the vlog Steve. It's like we're in your family room with you having a conversation about airguns. Except, of course, you do all the talking. I keep trying to get a word in, but no luck so far. Look forward to the full review on AEAC Home.

[@Manuando88]

Hola me encanta tu canal , el cuidado con el que realizas las pruebas hacen que sea lo mejor de KZbin hasta ahora. Me encantaría como fan de AEAC que hicieras mas test e información única sobre riflescopes . Gracias y enhorabuena por tu canal

[@gbuggy440]

Love the sound of that pump while running. Very strong sounding. Gun looks great. Looking forward to review.

[@BhutJolokias]

You're the man Steve. I've had my .22 Flashpup for a few months now and it's a beast. The hammer spring can be adjusted easily. I move between 22 and 36 fl/lbs depending on whether I'm plinking or dispatching varmints. It's a piece of cake to work on and accurate as all get out.

[@tracykimball6919]

Nice video Steve, can't wait for full review and details for entering in the drawing. Love all your channels.

[@aeacvlog2033]

😊👍www.airgunnation.com/forum/review-discuss-win/win/

[@airgunadventures3078]

Great video Steve... always learn something from you every time.

[@johnshanks8390]

It’s really exciting time for air-gunners these pcp and pumps are so amazing

[@michaelleeman8372]

This is some Good,Exciting News! I can't wait to see the full review. There are some pretty bad-ass guns and products coming out lately at Good prices! Woo HOOO!! Thanks for the video,Man! Mike.

[@phillipmendiola1257]

Very good information and presintation on that hatsan compressor , I wish the flash pup came with a synthetic stock ,impressive on the GTO alloy pellets . awsome presentation on the flash pup Steve .

[@fjqtaxch9]

Thanks Steve for another informative segment.

[@ronaldmoffett3498]

Great review! Always enjoy your interesting presentation!

[@unclebuzz6913]

I WOULD LIKE TO GET THIS SETUP AS IT SEEMS JUST WHAT THE DR. ORDERED SO TO SPEAK ,FOR BREAKING INTO THE PCP AIR GUN SCENE. GOD BLESS AND GOOD INFO CAN'T WAIT FOR FULL REVIEW

[@psycho6275]

Just got the composite stock model in .22 can't wait till it arrives

[@AirGhandi]

The compressor looks great. Hope it will come to Germany!! Thanks for your video Steve! 😃

[@jason3064]

Can't wait for you to get your hands on the hatsan bully

[@whistlingk9833]

A GOOD portable 4500 psi compressor is my next buy. Thanks for the look.. I just added the Pyramyd flashpup .22 hand pump deal to my stable. I will follow this compressor closely.

[@jamesgreen9954]

I only paid $229 for my Yong Heng compressor 2yrs ago and filled my gun with it and only took about 20 seconds for about a month until I found a great deal on a 30min 4500psi SCBA fireman’s tank. I only have to fill my SCBA tank once every 2 or 3 months depending on how much I shoot. My new Skyhawk I purchased at that time holds 3325psi of air and the hand pumps are a nightmare at these pressures. I haven’t had a single problem with my Yong Heng compressor however it’s not really portable but my tank is. Purchasing any kind of compressor and or tank will make your shooting experience about 100✖️ better and you will go thru ammo at least twice as fast. Keep shooting & be happy fellow shooters.👍🇺🇸

[@albahar0690]

Considering. we look forward to its performance

[@FarmerFpv]

That compressor is made by Tuxing, they also make the Air Venturi Nomad II PCP compressor. I have all 4 and they do indeed have all the same part numbers. You can buy directly from Tuxing and save 100 dollars but you will not get the Hatsan or Air Venturi warranty which isn't that big of a deal as they are easy to work on and use the same parts. Tuxing also makes great repair and maintenance videos for all these compressors. They are great little portable compressors but super loud, lol. Awesome review.

[@AEAC]

👍

[@airgunnersedge4061]

The Flash & Flashpup .25 are amazing guns especially after tuned and regulated.... such a amazing guns for so little and I bought mine refurbished...

[@richardherrell1255]

Steve. Ive been following you for some time now. I find your reviews concise and accurate. I bought the tacair lightning compressor. Another derivitive of a chinese 2 head platform. However Hatsan nailed it. Wow a auto purge, cotton fiber & a dessicant drying system. Again WOW. A class by itself. Great machine. Digital controls make it much easier to use. I also enjoyed the reviews on the streamline and crown. Im leaning on the crown. .25cal. Which would ypu think an old vet. Would enjoy better?. Synth. For sure. I have a sumatra .25 & that flashpup .25. WOW Nail hammers.! @ 50yd.s let me know please. Email me at [e-mail] or leave a reply here. Rick. Thanks. Ps your hearing is fine & haters never hear or listen anyway!

[@Master-Baiter]

Just ordered the 22 refurbished, will purchase the 25 and sell the 22 if it pops up however. Can't wait to get my hands on it

[@Richard.212]

Thank you Steve and Thank you Hatsan

[@DirtyDovi]

It's nice to see more bullpup setups out there now a days. I used to convert my Ruger 10/22s into pups, and now I have a Gladius, and love it. NY weather is harsh now, so I put up the powder burners, and made an indoor pcp rifle range.. This Flash Pup looks great, I just prefer rifles that offer adjustable power level settings. Being able to kick down the velocity is a plus - especially given my current shooting conditions. Anyways.. I've always used higher end pellets in my air rifles.. In .22 cal, I've always used JSB Exact Heavy 18.13 grains, and had fantastic results. Well, I was at WallyWorld the other day, and spotted some Crosman Premier .22 Hallow-points.. I grabbed a tin of 500 for like 7 bucks, and figured I'd give them a go - not expecting much at all.. To my surprise, these lighter 14.3 grain pellets actually grouped amazingly! I'd heard rumors that Hatsan guns [barrels] could be picky, but nope, not in this case.. The Premiers shot just as well as the Exact Heavy pellets, and at half of the price tag. [I was shooting both JSBs and Premiers on power settings 4 and 6, then settled at 4, 1/2 power] For shooting indoors til' spring, they'll be my new go-to rounds for sure! So there's a heads up for everyone - just in case you haven't tried them yet. Sam -

[@aeacvlog2033]

Hi Sam. My bad... the Flash's hammer spring tension is easily adjusted when you take the stock off. Folks have ready pushed them upwards of 45 fpe in .22 with the 25 gr. Also, if ya head over to AEAC Home, I released a vid just 2 weeks back on the Kalibrgun and it too performed well with Crosman Premiers in that vid. Steve

[@DirtyDovi]

​@@aeacvlog2033 Steve, thank you very much for the extra information! That's great to hear! I'll most definitely be checking out more videos, as they're some of my favorite on KZbin. You do an amazing job of covering everything, and the production level is top notch! BTW, I've been scouring the net for everyone's reviews on the Puncher Breaker, as I've had my eye on those for quite some time now.. Your review was awesome, and seriously has me leaning towards of of those now too! Thanks again! Sam - [EDIT] As of 12/12 I've officially added a Puncher Breaker Silent Marine .22 cal to my collection! 1st Impressions - Killer little rifle! I removed the shroud, fitted my DonnyFL Ronin suppressor, and within a few minutes, I was stacking pellets. Awesome! After I lower the trigger lbs of pull a little bit, I'll be digging just about everything it! [Only con - non adjustable butt pad, but, I'll be working on that one]

[@shield400]

Great....ish overview. ;-) Thanks Steve!

[@erlisvidal]

Now we need a compressor that’s designed to plug it directly to the 110v. Hope to see that in the future.

[@Twelvestonestacking]

Excellent content! Thank you from Land O Lakes, FL... blessings!

[@aeacvlog2033]

Hello!

[@quacksjuicefactory297]

I'm surprised it doesn't have an auto shut off. It looks so similar to the Air Venturi Nomad which I bought last Spring. The Nomad has an auto shut off but you have to keep watch the first couple of times as the pressure reading is not completely accurate, at least on mine. My only complaint with the Nomad is they could make the electrical whip a few feet longer. Enjoy. They are great out in the field shooting all day.

[@Jlitnin01]

Trigger adjustment is the opposite. Clockwise of the rear-most screw will lighten the pull weight. It can be a little tight at first.

[@rzage1]

Steve , love your videos but I wish Hatsan and Air Venturi would let you keep these compressors for at least a year or more to test their reliability . Thanks again !

[@growlith6969]

I bought the Flash QE (Rifle) from Airgun Depot on sale for around $260 (now its $289.99). The rifle, a Q7 hand pump, and a big tin of JSB's put me out $411. Make sure you buy the quick connect because neither the pump or gun comes with it. But dang guys what a bargain, its such a good gun for that price, just keep the pressure between 180-150 bar and its surgical.

[@KimchiJerry]

Shouldn’t the oil/water filter be facing up(vertical)??? And not horizontal from the compressor?

[@deceptiveautobot]

Great vid as usual Steve, saw that box from DonnieDu, is an Air Venturi Nomad II in there works? Not takin' Hatsan's spotlight already got 2 tree rats w/ the Dominator Vortex underlever. Just asking ✌ out bro.

[@aeacvlog2033]

Yes the Nomad II arrived here about 7 weeks ago. I took ya'll a picture of it when it did and shared it on Instagram. You can follow me there too for the day-to-day 👍. Steve

[@reelfishing002]

I wonder if the hand pump will also have moisture issue too ?

[@Jlitnin01]

Hey Steve. I remember you saying you adjusted the trigger to under 1 lb. I turned the main pull force adjustment screw all the way, but it is still way too heavy for my liking. Do you have any suggestions on how I can lighten it beyond the main adjustment screw (the one closest to rear of the stock). Thanks for any help you can offer.

[@richarde735]

Steve, the 115/230vac to 12vdc power supply has a fan. does your power supply fan engage immediately or is it temperature controlled? I just pumped up my Benji from 1,000 to 3,000 psi. my pump worked like a champ but the power supply fan never came on. should I look into getting a replacement power supply? never mind, I just got to the part where your fan engaged (immediately).

[@scottbaer]

Thanks for the great info Steve! Quick question. Does the blue end of the whip cord that connects to the compressor unscrew? My spark compressor came with some small white cylinder filters which are about one inch long but I’m not sure where they go. I am thinking they go inside the blue part of the whip cord but I didn’t want to unscrew that piece if the filters don’t go inside of that area. Thank you!

[@AEAC]

Hi Scott. I honestly can't remember buddy. It was so long ago and the compressor went back right after the review. I'd reach out to Hatsan USA with your question. Best, Steve

[@dcmtrader]

I purchased the Flash in .25, partially based on your review. I am very happy with the performance and with only a hammer spring adjustment it shoots JSB King's at 40fpe over 20 shots. I love the gun but have some concerns. I emailed Hatsan USA twice about a couple of issues, I also called and left messages and they never responded. Although these are not issues that require warranty service, I would feel better with Hatsan products if they were more responsive. I also started a forum poling at GTA a while back about the subject and responses were split as to quality, and moreover customer service being unresponsive. Again, love the guns value and the performance, and considering a BT65 but their lack of responsiveness is a concern as well as almost half of the responses I got were complaints of quality and the lack of customer support. Since you say you are "partnering" with them on some level, and I very much trust your honest opinions, I'm wondering if you have had the same feedback about them. I also am curious why they "seem" unaware or unconcerned with the perception of the consumer. Thank you for all your hard work and I can't wait for your review!

[@aeacvlog2033]

I just shared your concern & comment with the steering team at Hatsan and appreciate you letting me know. I'm sure they'll be along to help you out, might be Monday though. Best, Steve

[@aeacvlog2033]

What's your name buddy? Hatsan is asking me. Thanks

[@dcmtrader]

@@aeacvlog2033 Like I said I don't have a warranty issue. My first problem was the gun was very under powered (650fps) and seems to be an inconsistency in tuning from the factory compared to listed specs (900fps), many owners have commented on this. Mine was easily tuned. My other concern is that the bore in the receiver where the bolt rides is VERY rough looking but has not caused any issues in function with the exception of cocking effort. I plan to fully disassemble, polish and modify some things so I doubt warranty service will be an option after that, lol. I appreciate your concern and offer to help but assistance is no longer required, as others, I have handled it myself. I do feel for customers hat do not have that ability and maybe directing them to the thread with comments about Hatsan could give them a good perspective on what people think about their company and product. www.gatewaytoairguns.org/GTA/index.php?topic=148825.0 Many have stated that they think they get a better product in a refurbished gun than from the factory as the USA team has more attention to detail and working out the bugs. I do understand it's not a high end product but it seems a bit more attention to detail from the factory could solve a lot of issues but that is likely a management / bottom line decision. Thank you for your time!

[@richardcampbell5762]

I was just getting ready to watch your review on the flash pup 22. On your other channel. Suddenly it was taken off KZbin or you removed it. Are you going to put it back in? Was really looking forward to it brother.👍✌🇺🇸

[@aeacvlog2033]

I removed it because I found a mistake. Will be backup in a few hours 👍

[@richardcampbell5762]

@@aeacvlog2033 thanks for the quick reply brother.

[@JoePatABC]

I'll be really interested in seeing the full review. My initial thought is that producing an unregulated PCP in todays market is going to be a tough sell at any price point considering the competition. However if it can perform as you intimated and deliver 25-30 shots with regulated accuracy, the rest of the guns attributes may actually outweigh the lack of a regulator. We'll see soon and until then I'll reserve any judgement (a pretty hard thing for me). BTW Athlon scopes are extraordinary across all their range. I own one, the 8-32x50 FPP, and it's brilliant at under 400 dollars. I've also shot with the 6-24x50 SFP and it is every bit as good optically as my scope. Throw in Althons first rate customer service and lifetime warranty and you'll be hard pressed to find a better value. Looks like a really nice package all in all, with the newly branded compressor as a cherry on the top (albeit a noisy little cherry) the whole package is going to really light up some lucky winners holiday season. Great stuff. ...TY

[@aeacvlog2033]

I agree with your thinking and it should be just fine. In my experience, 100 yard accuracy normally doesn't vary so long as you're within a 25 fps extreme spread. Steve

[@rivhunterclub2821]

hello friend I have a FX crown .30 and I want something more compact to hunt is recommended the flash and would like to know if it is possible to put regulator huma?

[@cajunnathan4586]

Have tried shooting SLUGS through the Flashpup? If so, how did it do?

[@skinnymitchairgunbrotherho7152]

Sweet love the blog channel

[@yoitired]

For what it's worth I've seen how the pros use the gel with a compressor in an industrial setting. They used silica gel beads, same come that come with clothes and is super cheap. They'd take out the old beads every couple of days and run them through the oven on a pan to bake out the moisture and just keep using them.

[@AEAC]

Interesting. Thanks for the info 👍. Steve

[@markstephens5120]

When and where are the compressors available? Love your vids by the way, keep up the good work.

[@aeacvlog2033]

A quick Google search pulled them up on Hatsan USA for me 👍. Steve

[@Campfussell]

hatsanusa.com/products/lightning-compressor

[@Campfussell]

kzbin.info/www/bejne/kGG8in59ituWfc0

[@gmmza03]

I would like to get a regulator for my Flashpup but can’t seem to find them anywhere online except in other countries. I am in US

[@thaddaeusblack7399]

What is a good affordable air pump.

[@jeffbricmont2456]

Steve, is that a Tipton compact range vice? Are you happy with it?

[@aeacvlog2033]

Hi Jeff. Yes, love it! Steev

[@boluna6287]

Have u ever tested or what do u know about the huben mk1?

[@AngryChair74]

I was posting a comment on AEAC when the video disappeared!! I'm assuming you are making some edits. I'll just hang out here for a while....

[@aeacvlog2033]

Yup. Forgot to give you guys the 100 yd group measurement! I've already fixed it. It'll take a few hours to render & upload.

[@bigearl8687]

🌬❄☃️ so cold up here in Jacksonville...hatsan did a fantastic job coming out with a compressor of that size, I mentioned that 2 u earlier this year & Rick eustler abt companies making a entry-level compressor around $5-$600 Air force has 1 called the e-pump,& the nomad from air venturi...my question is can they fill those bottle guns? the Hatsan bully & air max deserves a review from u steve & the air arms s510 ultimate sportier regulated...great video as always...stay warm

[@aeacvlog2033]

Holy crap Gerald, u ain't kidding!! Packing up the truck now to go film with the Flash and I can't hardly feel my fingers 😳!!! Steve ...AA .25 XS is December's RDW👍

[@HatsanUSAInc]

The Spark compressor is designed to fill up to our largest reservoir on our guns the Hercules at 1000cc. The Spark compressor can fill bottles/guns of up to 1000cc to 4500psi if the bottle/ gun is rated to that fill pressure.

[@bigearl8687]

@@HatsanUSAInc thanks u so much for that information. question abt some of your guns.will there be a more powerful 25cal break barrel? or a new line of the bt65.

[@HatsanUSAInc]

@@bigearl8687 With current technology the only way to make a more powerful .25 break barrel would make the gun larger and heavier and the demand is for smaller and lighter. We have no plans currently to add more models to the BT65 line.

[@deceptiveautobot]

@@HatsanUSAInc The .25 Sniper is one powerful mother. It says 750 fps on the box and mine does it brother! On the head w/ JSB 25.39 grn. I regularly shoot 12 oz. cans @ 108yrds.

[@TuxingCN]

Nice video

[@barlscharkley5411]

Will you be doing a full review of the Spark compressor? What kind of maintenance is required? Does it use coolant that needs to be replaced/replenished? What is the maximum duty cycle?

[@HatsanUSAInc]

The Hatsan Spark compressor is designed to be self contained and maintenance free, in other words no lubrication intervals. The compressor does come with spare O-rings to rebuild it if needed but we recommend returning it to HatsanUSA for service to maintain the warranty. The Spark is an air cooled unit that does not require coolant. The maximum duty cycle is filling one 1000cc 4500 psi cylinder at a time then let cool down and fill another. If you require filling more volume or to fill multiple guns in quick succession we recommend the Hatsan Lightning compressor.

[@scottbaer]

Does the blue end of the whip cord that connects to the compressor unscrew? My spark compressor came with some small white cylinder filters which are about one inch long but I’m not sure where they go. I am thinking they go inside the blue part of the whip cord but I didn’t want to unscrew that piece if the filters don’t go inside of that area.

[@waterboxer87]

I am curious about the longterm reliability/durability of the offshore produced compressor(s). I hope you test the Hatsan unit extensively and give air gunners a report.

[@aeacvlog2033]

As I mentioned in the video, the compressor unit will be going to the winner of our giveaway. Did you watch the video? Steve

[@johnaverick7468]

This was a year ago, I wonder if they have an even cheaper version with a composite stock now ?

[@CobosDoesItAll]

Yes they do. I bought one today

[@psycho6275]

Bought one yesterday

[@IzaelLealairguns]

👀🇧🇷🇧🇷👊🏻👍🏻 Ótimo vídeo Stive ! 👏🏻👏🏻👏🏻👏🏻👏🏻

[@MrVasmikey]

Thx Steve. Looks like we got our Turkey for the year eh? JK. Nice pup for the price. Can we install a reg?

[@BhutJolokias]

Huma does have a regulator for it.

[@BobSmith-fd7oj]

HELP> air pump for hatsan flash air rifle qe .25 pcp 900 fps turkish walnut stock. I got 2 hand pumps but can't seem to get air into cylinder. Any help on best cheapest way to fill plz?

[@AEAC]

Hi Bob. Not sure exactly what you're asking me but Hatsan USA has a customer service team that can assist you. Best, Steve

[@ap0lmc]

My Tuxing is the same but I got it with an automatic shutdown

[@GenralNuisance]

In what country is it manufactured? Thanks

[@monkey0550ify]

Question would this air rifle be hand pump friendly for a beginner

[@aeacvlog2033]

Yes

[@Titus1nine]

Do the Sniper Magnums and Jumbo Monsters fit in the magazines? Also did you do anything special to get it to bolt so easy?

[@aeacvlog2033]

Yes both pellets fit into the magazine. No, I did nothing to the bolt... reported as it came outta the box. Steve

[@phillipmendiola1257]

Did you say there will be a giveaway on the whole flash pup set up .

[@aeacvlog2033]

Yes, the industry does this monthly through AGN & AEAC 👍 www.airgunnation.com/forum/review-discuss-win/win/

[@coolnikish]

in case of hatsan the price does not detract accuracy, this the mos accurate entry level bullpup imho.the predator GTO have always shot lights out in your tests.

[@aeacvlog2033]

Tru-dat, but not that I ever recall at these velocities. Best, Steve

[@jamesdenny4734]

hey steve Hello, wondering if you reviewed the brocock bantam ?

[@aeacvlog2033]

Hi James. Yes, I did some time ago but it contained hunting so I took it down (KZbin was acting strange about thus things back then). There's a new Bantam now called the Sniper HM and AOA will send that for a review sometime this winter... thinking it'll be a February RDW. Steve

[@ElyFrankes]

@@aeacvlog2033 Steve, I'd very much like to see your Bantam review. Could you post it on Vimeo or in some other fashion?

[@wascalywabbit]

Lol.. Im glad you said sister channel...Subcribed 😁

[@TheMwarrior50]

Hey Steve I have something to ask you. My class requires us to make a video on a topic, and mine will be the education of airguns. I was wondering if I have permission from you to use some of your footage in the video? Ill make sure to give credit c: Thanks, Martin

[@aeacvlog2033]

Yes Martin, thank you for asking. Just be sure to credit AEAC with a link to any video pieces borrowed in your description box. Steve

[@TheMwarrior50]

AEAC Vlog Awesome! Will do, thank you c:

[@raohanting6820]

What price gun

[@Jlitnin01]

Have you ever shot Crosman Premiere hollow point or Crosman domes with this gun? Any idea how the gun shoots those pellets?

[@aeacvlog2033]

Hi Johnny. Yes, I shared the results of this for y'all on AEAC's Instagram & Facebook. Steve

[@Jlitnin01]

I saw the video which shows JBS, Diabolo Field, and H&N, but I can't find the Crosman Premiere results. Can you please give me a direct link? Thanks!

[@aeacvlog2033]

I'm confused by your question Johnny as I provided instructions in the vid for y'all on how to find this stuff. I actually said aloud, "for discovery and approach visit me on Facebook and Instagram" as well as provided detailed instructions on how to find me there. I'm confused as to why you're asking me for things I've already given ya'll 🤔

[@Jlitnin01]

I did find you there, but there is alot of stuff there and I am not experienced with those sites, so I am having trouble finding Crosman results. All I really want to know is if the Crosman Premieres are accurate in this gun.

[@AEAC]

@@Jlitnin01 At 25 yards they'll group at about .65". They're not suitable for longer ranges like 50 & 100.

[@stevemichigan541]

Bought one Hassan. Broke in 3 days. Trigger broke. Good luck with warranty. After days on e mail and phone I put it out in trash. I own 40 or more pellet guns. I am not a idiot. From. 177 to .50 cal Shoot 10.000 shots a year.

[@AlexDumitruHQ]

Breaks like crack! 🤣 Cracked ME up!

[@billbrown3414]

Why doesn’t someone make a bullpup springer?

[@AEAC]

underlever cocker fixed barrel might work, cool idea, Steve

[@Feel.I]

Artemis p15 review please 🙏

[@aeacvlog2033]

I apologize, I have no source for Aretemis at this time but I'll be receptive if they reach out. Steve

[@dmithsmith5880]

Not being negative about the Spark or anything, it's a good compressor but the Yong Heng for hundreds of dollars less, it dosen't care about filling tanks, it bangs out 1hr tanks from 2 bar to 3 bar in like 8 mins one after another, plugs into the wall without buying a transformer and let's face it, if I was going out into the wilderness I would just take a 45min or 1hr tank with me and be done with it. And if I really needed to have it with me in the woods I would just plug it into the outlet in the back of my SUV because most of them now have a 120vac inverter already built in. Just saying

[@aeacvlog2033]

All good 👍, so long as we're acknowledging the other truth in that story... the forums are filled with lots of stories of YH owners putting lots of hours (and $) into making those machines run cool and reliable. Best, Steve

[@dmithsmith5880]

@@aeacvlog2033 Ya, you do need to have a bit of machinist savvy and mechanical ability to get the best out of a YH... I forget that everyone isn't so adept to dealing with a frisky China compressor lol. I wouldn't trade mine for the world though haha It's all part of the hobby to me.

[@cristianrivas7540]

I thought It was quiet sounds loud to me not back yard friendly

[@Bigtexas-qm1cv]

Does it work with any brand pcp rifle

[@johnbutterworth1369]

I know a couple of girls that have a house just like that in pensacola Florida.

[@kouta43210]

Why pronounce Hatsan as "Hut-sahn"? I know Hatsan is originally a Turkish company, but what's wrong with the natural English pronunciation, "hat-san" (rhymes with cat-tan)?

[@AEAC]

Outta respect, I just pronounce it as I hear them say it at IWA. From there, people can do as they please.

[@stonepvv]

All that for a bit of shooting. No way. Rather get a good accurate .22 with silencer and it will be much more enjoyable. Yes and licence is a factor but you do not have to schlep all that stuff around.

[@deaczorz]

or get yong heng, way better and cheaper

[@aeacvlog2033]

They making that in a portable class 12v now? About the "way better" part, I'm not sure that's what everyone's experience has been; www.airgunnation.com/topic/did-i-make-a-big-mistake-i-bought-a-yong-heng-compressor-from-china/

[@deaczorz]

Getting a portable compressor is not the way to go, as a car mechanic I would not connect that to my current gen car. Get a carbon tank and fill it at home and then bring that to the range. Better and faster, maybe even cheaper but thats up for debate tho. Most ppl are happy with them, ofc when it comes to bottom tier products then there will be quality issues. That said, Hatsan is in the same bracket as YH as far as im concerned

[@noonster55]

I like their product, hate their customer service, or lack of service...

[@fredflinstone4071]

You just sold me my hand pump is best lol

[@rosendinov5643]

No, i forgive you...

[@alexanderdragnev5966]

It really is amazing - I don't think I've ever seen so many pieces of dangerous to the user, overpriced Turkish JUNK in one place 😆 I hope Hatsan paid you enough for this commercial, Steve.

[@aeacvlog2033]

Vlog channel is complimentary. Paid productions are over on AEAC Home... pay attention. Steve

[@kylejones4321]

Rip off