Have a MISFIRE On any Cylinder PO30? Then Replace This One Part But ONLY if Your Plugs are Good

[@SweetProjectCars]

When you throw the PO301 code What needs to be done? it is easier than you know to repair. The Blue Bummer is finally succumbing to our dominance LOL Quote of the Week: *The trouble with most of us is that we would rather be ruined by praise than saved by criticism.*

[@4rdF1Hunny]

You ain’t joking with that quote.

[@paulduffey8459]

You sir are a testimony to intelligent mechanics. Love your channel. As a shade tree wrench turner for more the 40 years you have given nuggets of gold to us do it yourselfers. I thank you sir and hats off to you.

[@SweetProjectCars]

Thank you so much! We truly appreciate the view and kind words, makes all we do worth it. They don't teach these kinds of things anymore, some of it's just lost. Hope you have a fantastic week my friend. mad Mike & team

[@Pantherman1979]

Well, if you don't sand the hood and just try to spray clear over it; it'll hold for a little bit but eventually fail and start peeling again, If you do sand it, and sand it till it's uniform in it's appearance, i.e. no splotchy white bubbles/areas just dull paint.... Than it'll be a job that lasts.

[@richardstone5241]

You want to do a light sanding prior to clear coat just enough to knock off the loose edges of the existing clear coat and to get a smooth surface. Do not go past the base coat if however you do just give it a fresh coat of base and then the clear coat. It will come out great.

[@Nico_335i_DCT]

Thanks for sharing guys. Btw I did the clear coat 'treatment' on a friend's old car, and after some new clear coat and polishing it looked perfect again. Thanks for sharing, have a great Sunday you'll. Many blessings Nico.

[@SweetProjectCars]

Thank you as always for watching and sharing, we are looking forward to our clear coat job as well :) Have a great week my friend. mad Mike & team

[@ScotWalt858]

Let there be FIRE! Nicely done!!

[@SweetProjectCars]

LOL Yes!! Thank you Scott! We always appreciate the view, hope you have a great week my friend. mad Mike & team

[@leakyjeep5.9]

My 21 year old o2 sensor was my p0300. Chased this for 2 years. Fyi upstream/closest to motor is the only one worth messing with.

[@SweetProjectCars]

Glad you found your issue my friend! Thank you for watching and sharing, we really appreciate it, hope you have a fantastic week. mad Mike & team

[@Jimmyky77]

Thank you Mad Mike and Julio Caesar Chavez Rodriguez Jorge Johnson Thompson!😛

[@SweetProjectCars]

Our pleasure Jimmy! Thank you for watching, we really appreciate it, hope you have a great week. Hoolio sends his regards :) mad Mike & team

[@AyAy008]

Name: "Baumer" Wants you to spend your own on him constantly. Thats definitely a fitting name 💀

[@SweetProjectCars]

LOL, sounds about right!! Thank you for watching and sharing, hope you have a fantastic week my friend. mad Mike & team

[@alexguzman5547]

Every single time you've done something major on this one, I'm more and more amazed that it ran good enough to get it home, in the first place. 😅 Have a good one Mike!

[@SweetProjectCars]

LOL, I know right!! I have my phone with me just in case I need assistance :) HA! Thanks as always for watching and commenting Alex, we sure appreciate it, hope you have a blessed week my friend. mad Mike & team

[@handyman-ir9qu]

How about video on repairing that cracked dash?

[@SweetProjectCars]

Check these out kzbin.info/www/bejne/b3_Yln1omLZ_bZo & kzbin.info/www/bejne/bnS8aZV5eayYipY Hope these help handyman! Thank you for watching and asking, have a great week my friend. mad Mike & team

[@TraumaChaplain]

How would you check of the lower control arms are good or not?

[@SweetProjectCars]

If your steering is sloppy or you feel rattles/vibrations when driving there's a good chance they need replacing. Another way to check is to jack one side of the vehicle up so that the front wheel is off the ground about 2 to 3 inches. You can stick a 6' or longer 2x4 under the tire, look at the control arm and see if anything is wiggling at the connection points. Also, look for any rotting or cracked rubber on the control arms and check all of your ball-joint connections. Hope this helps my friend. Thanks for watching and asking, have a great week. mad Mike & team

[@phyllismulkey3778]

big difference

[@SweetProjectCars]

It sure was Phyllis! Thanks for the view and comment, hope you have a great week. mad Mike & team

[@Mr.Humphrey60]

Great job (sir)😊

[@SweetProjectCars]

Thank you very much! It's our pleasure to help. We appreciate the view and comment my friend, have a great week. mad Mike & team

[@nordicpride9708]

Why does KZbin C block your channel? You should be at 500k a year ago. Unreal

[@SweetProjectCars]

I've stopped trying to figure it out my friend :) I just keep producing content for my awesome viewers/subscribers and let the chips fall where they may :) Thank you for the view and comment, it's appreciated, hope you have a great week. mad Mike & team

[@Graphl]

I think when you put the clear coat on you'll have a shiny faded hood😅

[@datdamndavisboy]

Where's the clear coat video? LOLOL

[@SweetProjectCars]

Stay tuned my friend! Thank you for watching, hope you have a great week. mad Mike & team

[@wolverine89893]

Wow! You are savings us a lot of money, by telling us where to get parts cheaper. I have been checking out Mr. Know It All as well. Yeah she is purring like a kitten now, no shutter is great news. Whoever gets this rig will be happy about the results. Great Job Mad Mike. Can't wait to see what happens next with this rig. 😊

[@SweetProjectCars]

Glad to help and share wolverine!! Thank you so much for the view and comment, we truly appreciate it, we're having fun with the blue bomber series! Hope you have a fantastic week my friend. mad Mike & team

[@MichaelR58]

Good video, thanks for sharing YAH bless !

[@SweetProjectCars]

Our pleasure Michael!! Thank you for always being here with us, we appreciate you my friend. Have a blessed week. mad Mike & team

[@ChevyCitation]

Hey Guys And Gals It's "Sweeeet" Project Cars Here With Cool Trick And Affordable Ways For The Do It "Yourselfer" And 👆Simple Ways

[@SweetProjectCars]

Thanks for filling in for me, I appreciate it buddy! Have a sweeeeet week! mad Mike & team