Thanks for the video just fixed mine went to my local junk yard
@RJsGarages2 жыл бұрын
Your welcome! Thanks for watching. Sweet so an under $10 fix for ya. That is always nice. Please like and subscribe every little bit helps during these times. Seize the day each and everyday-Are Jay Here is my 2nd gen Dodge playlist of repairs in case you need them some time.
@jamiegearhart1145 Жыл бұрын
Sir look up dash skin for your truck. Cheap fix but looks good.
@jerryharrington11522 жыл бұрын
Nice job. I have the same problem, I think. Will know in about 1 hr. Thanks so much. Very thorough video.
@RJsGarages2 жыл бұрын
Your welcome thanks for watching good luck. Please like and subscribe every little bit helps during these times. Seize the day each and everyday-Are Jay
@RJsGarages2 жыл бұрын
Also here is my dodge ram repair videos playlist. In case you have other issues down the road. Top 2nd gen 1994-2002 Dodge Ram repairs and upgrade videos: kzbin.info/aero/PLQ0kUxbVWpJ-ebGroH9mPPUSfTWONjU-0
@toolsntruck941 Жыл бұрын
yep the dash get so brittle and have to be rebuilt i also use some angle iron and metal plate .i did find a complete dash in a wrecking yard and boy was that a pain to swap out the dashes wont ever do that again .i can just hear that fragile plastic when your prying and moving it around
@GbodyEthan842 жыл бұрын
I have regular lights in mine but the switch is melting on the low beam prong inside the switch, I don't know why it's doing it but it seems to it once I turn the truck off
@RJsGarages2 жыл бұрын
Hey ethan the melting switch is the same problem for most. Just need to replace it with a new one. Thanks for watching! Please like and subscribe every little bit helps during these times. Seize the day each and every day-Are Jay Here is our 2nd Gen playlist in case you ever need it. Top 2nd gen 1994-2002 Dodge Ram repairs and upgrade videos: kzbin.info/aero/PLQ0kUxbVWpJ-ebGroH9mPPUSfTWONjU-0
@tommyfreeman7154 Жыл бұрын
I've done replaced a headlight switch in my 97 dodge ram truck and Ill have to try something else now I dread it to
@edwardody3112 Жыл бұрын
08 jeep grand Cherokee I replace turn signal switch headlight still flicker on and off when I turn steering wheel
@seanbrossard8178 Жыл бұрын
If you want to stop the melting wires/switch install a 25amp(higher amp relay better)relay closes to the battery and upgrade the the wires to larger gauge and it should be the last time you will have to replace the switch. So now the high amps doesn't flow through the switch only from the battery to the lights. Just look at a wiring diagram for fog light aftermarket. Your old wires going to the lights now will be the signal wire for the relay and your high amps will travel straight form the battery through the relay to your headlight and going to larger wires will handle more current with less heat. The other benefit is usually bright lights.
@samuel4322able Жыл бұрын
So I have to change all of the wiring harness to thicker gauge ?
@seanbrossard8178 Жыл бұрын
@@samuel4322able only the ones from the battery terminals to the lights through the relay none of your old wires
@nobudgetcharlie77532 жыл бұрын
He just can't admit, she knows more about that switch than he does.
@lupitadelgadillo94272 жыл бұрын
Mine has the same issue. I replaced the switch like you did and also use the new connector and wired it to the trucks wiring but still have the same issue. What do you think it can be?
@RJsGarages2 жыл бұрын
Did you check the wiring harness real good for pinches or cuts? You could have a bad ground wire. Thanks for watching, good luck. Please like and subscribe every little bit helps during these times Seize the day each and everyday-Are Jay
@brothersalvarado76822 жыл бұрын
Where you get the switch from
@RJsGarages2 жыл бұрын
I put a link in the description below the video. Thanks for watching.
@brothersalvarado76822 жыл бұрын
Ok ill take a look thanks buddy
@danny_boyx29492 жыл бұрын
Same problem with my 98 keeps turning off and they turn on last a bit and turns of again
@RJsGarages2 жыл бұрын
Hey sorry i didn respond yet, did you happen to get a new switch ordered to replace it. This one worked great Light Switch amzn.to/3tTug30 Still going strong months later. Thanks for watching! Please like and subscribe every little bit helps during these times. Seize the day each and everyday-Are Jay
@danny_boyx29492 жыл бұрын
Thanks for answering and i check the switch and cables have been burning the plastic so im ordering the switch
@mikebrannigan720710 ай бұрын
You can unscrew the switch and remove it without removing the entire plastic dash face. He did way to much unnecessary work...