Headlights for the back of your vehicle!!!! Xenon Depot XTR LP | Headlight Revolution

[@FamousAndFallen]

This light is awesome. Just installed it. Hope it lasts!

[@BCFarmersAlliance]

HR always has the best informative videos. A little more detail on how to connect the wires would assist.

[@HeadlightRevolution]

Glad it was helpful!

[@wadeepperson6906]

Could I hang it on the bottom upside-down ?? My camera is right next to the top and im sure the light would drown the camera out.

[@HeadlightRevolution]

You definitely could!

[@polarisflyer]

I was wondering the exact same thing! Thanks for asking the question, and thanks to HR for replying!

[@jeremycarter]

Dangit! I wanted to do the braille method for driving. Sounds fun!

[@HeadlightRevolution]

It can be very fun in the right conditions!

[@ChannelOne-1]

Totally nabbed one of these...wiring it directly to my sPod so I can turn it on/off any time!

[@HeadlightRevolution]

That’s a slick idea, We love the S-Pod.

[@phamtadao]

Do you have an install video for a Tesla Model Y? Just wonder the best way to get the wiring from inside the car to outside.

[@HeadlightRevolution]

We do not, but we can suggest it to the video team!

[@20sBurning]

Could you test this against the VLed one?

[@HeadlightRevolution]

We might make a review video soon showing the differences between the two.

[@HAMMER_2.2]

@@HeadlightRevolution has this been done yet? It would be nice to see that. So far im kind of leaning toward to VLED version because it has a whole frame that works with theirs.

[@bobsugrue2703]

I have dark tinted windows this could help at night. $75 seems a little steep for one little strip though.

[@HeadlightRevolution]

It might seem a little steep, until you see it in action! This is not just "one little strip" this will get yuou more light output than most peoples factory headlights, but in the rear! You will be blown away by these things! Let us know if you have any other questions, we are here to help!

[@davidcatlette9697]

LMC is 69.95 ! 🤔 so price is close for cheaper too the way better brand ! 😳

[@nicknick9081]

Well, now they cost $84.

[@RidinSolo92]

Installed one but it's not lighting up. Haven't had a chemce to troubleshoot but will get at it later today. Can it be warrantied if the pig tail has been cut?

[@HeadlightRevolution]

Yes, just shoot us an email! [e-mail]

[@jamessmoth8683]

How about placing 2 of these on your plate. 1 across the top like shown and another across the bottom?

[@HeadlightRevolution]

You could definitely do that!

[@HAMMER_2.2]

Great idew, holy sh#t that would be nice ×

[@FAasheim]

How many amps does the backup led bar take? I’m afraid it will overload my back circuit… (HyundiTuscon 2023}

[@HeadlightRevolution]

You can check out all the product specs from the link in the description!

[@GROGU123]

Will this work for the front of my Mower as well? I need better lights for my snow thrower, which mounts to the front of my mower.

[@HeadlightRevolution]

I would do a more dedicated pod light for that application. For example, Something like these would work well! Both Rigid and VisionX make insane pod lights, Email us at [e-mail] for more details: headlightrevolution.com/rigid-industries-201213-dually-spotlight/

[@j_blizzy]

using a georgia license plate in the video is absolutely perfect since im from georgia lmao

[@EZCompanyCollectibles]

Now I gotta see this installed on a 5th gen 4runner

[@lyodbraun]

EZCompany Collectibles yes indeed I have LED BULBS in mine and they are definitely better than stock but still not the brightest I need this mini light bar for my 5th gen 4RUNNER..

[@EZCompanyCollectibles]

@@lyodbraun I need it too, but I'm in now way splicing...so im..yeah

[@HeadlightRevolution]

We will do a video on installing this on a 5th Gen 4Runner in the very near future. Subscribe so you don't miss it!

[@EZCompanyCollectibles]

@@HeadlightRevolution awesome!

[@lyodbraun]

Headlight Revolution perfect I’m looking forward to seeing it and where and how to run the wires from the lift gate and into the rear tail light housing..

[@gclavijo]

Does it create glare on the image captured by the backup camera?

[@HeadlightRevolution]

Depends on the camera placement!

[@davidcatlette9697]

What is the lumens when light is on ! And looking too change headlight bulbs on my 07 Dodge Ram the factory lights are too dim !

[@HeadlightRevolution]

This is right around 2700 lumens of light output! For the headlights, try these! www.headlightrevolution.com/dodge-ram-06-08-xb-hybrid-headlights

[@Tahoebronco]

I have a license plate frame that also includes a clear plastic cover to help keep the license plate clean. (bought at Auto Zone.) Will your light still work with those 2 items installed?

[@HeadlightRevolution]

It should work fine, This is pretty low profile.

[@SATXrattlesnake]

How did you run the wire from that location to the reverse light harness? Behind the bumber? Did you drill a hole anywhere?

[@HeadlightRevolution]

Right behind the bumper! On some trucks you have to drill a hole, On a lot of trucks there is an existing opening behind the plate that the wiring fits through.

[@kenmccarthyfishing]

That's awesome, and more importantly easy 👍👍👊

[@HeadlightRevolution]

Super easy, On some vehicles you can have it installed in less than 5 minutes.

[@nef_]

Would it be better to put one of these on instead of buying LED reverse lights?

[@HeadlightRevolution]

Personally I’d do both. I have the red F150 in the video and it’s insane at night! That being said, If you had to pick one, Start with the reverse light bulbs in the tail lights. Our 1000 lumen kits are incredible.

[@mouafishing559]

What are the brightest reverse light bulbs I can get for my 2018 tundra? I’ll be adding this light bar after I get the reverse lights

[@HeadlightRevolution]

We have a full video on the Tundra being launched in just a few days! It's going to show you how to install this license plate light, the reverse lights, cargo lights and license plate bulbs. It'll also show you the best and brightest bulbs possible for each location. Subscribe so you don't miss out! Here is a link to the reverse lights: headlightrevolution.com/2014-2019-toyota-tundra-led-reverse-bulbs-upgrade/

[@hemitj]

Nice product! What about the bright bulbs in the 3rd break light?

[@HeadlightRevolution]

Those are the 1,000 lumen reverse lights, They are INSANE. They don't fit every truck's third brake light because they are quite large, but if you email us at [e-mail] with your vehicle info we will let you know if they work for you!

[@johnmalone4101]

Could this be wired to an existing trailer harness instead.?

[@lamont199105]

Is it waterproof ?

[@HeadlightRevolution]

Yes it is.

[@nomad-1776]

Do these need a resistor like turn signal leds?

[@HeadlightRevolution]

Not at all!

[@e.b.6766]

Ordering a couple of these light bars!!!

[@HeadlightRevolution]

You're going to love them!

[@markbulva4188]

I have the rigid back up light kit that I gotta install yet but yup gonna have on a toggle switch also

[@HeadlightRevolution]

The toggle would be nice for off road situations.

[@gHiDoRaZ]

Will this fit 2019 RAM 1500? Because the VLED will touch the tailgate when it open, Any test fit with any trucks with tailgate open?

[@HeadlightRevolution]

We did one recently and it fit but it was close. It might vary from truck to truck.

[@100AFNF]

Could I install two of these? One on top part of plate and one on bottom.

[@HeadlightRevolution]

Yep!

[@AnthonyTadle]

do you have one installed on a 2015 Tahoe? thanks

[@HeadlightRevolution]

Not at this time, sorry!

[@DavidGeeraerts]

Any tips/suggestions for wiring a Toyota 4Runner 5th gen?

[@HeadlightRevolution]

We will be doing an in depth install video on one of them shortly.

[@MrAlpinekid]

Lites look good. Now how does one wire it in a mini van like a Dodge Grand Caravan??

[@HeadlightRevolution]

We've got a few vehicle specific videos launched on KZbin right now that you could watch for the general idea, But you'd want to pop your tail light off and find your reverse light wires with a multimeter or test light.

[@nicklockhart]

Why don’t you guys sell tailgate light bars? I don’t think I’ve seen them on your site

[@HeadlightRevolution]

They don't get asked about too often. Maybe we'll look into them.

[@callmefrog76]

Does it wash out the view of a backup camera?

[@HeadlightRevolution]

It might depending on the placement of the back up camera, on my Q50 it does!

[@sheldonrichard8267]

Will this work along with a license plate cover?

[@HeadlightRevolution]

It sure will! (:

[@rostamr4096]

Please do a video on how to install on Toyota 4Runnewr. the wiring portion that is

[@HeadlightRevolution]

Coming very soon, We have it on the schedule!

[@auntjemima1111]

Nice quality video guys good job

[@HeadlightRevolution]

Thank you!

[@D.D.REAPER]

Are y'all in Marietta Georgia

[@HeadlightRevolution]

We are in midtown Atlanta.

[@RunEmDownTony]

Oh I want this!! I need this!!

[@HeadlightRevolution]

It's one of our favorite new products.

[@joejr9653]

Looks pretty good.

[@HeadlightRevolution]

Thank you Joe, They are our new favorite product!

[@lucykingcooking7636]

good video

[@HeadlightRevolution]

Thank you!

[@princedylan101]

What is the wire gauge?

[@HeadlightRevolution]

It appears to be 18 gauge wiring. It's sufficient for the current draw.

[@sniperjj1077]

Once my tax returns come back, this is gonna be in my order for my car. I'm already waiting to upgrade my high beams, low beams, and fog lights (V4, V4, and CSP Mini, respectively.) Another thing in my cart.

[@HeadlightRevolution]

Awesome! We can't wait to get you all hooked up!

[@donaldalderman2424]

My reverse lights also has a green wire. 🤔

[@softkitty3488]

@ 2:52 the before and after is misleading you are showcasing the reverse bar on the license plate not led for the entire truck so why have a before and after where you replace every single reverse light to mislead customers into thinking that the light bar will give off that much illumination. Very shady😑

[@HeadlightRevolution]

We wanted to show the entire package that we sell for that particular truck, but I totally get what you're saying. It wasn't intended to be deceptive.

[@joejr9653]

Let's get install video for 2020 Tundra Pro.

[@HeadlightRevolution]

Coming very soon!

[@TheNorthernFishers_204]

Toggle switch for speed light cameras

[@HeadlightRevolution]

Ha! I love that.

[@leegacy3099]

$75? Well that's pretty high profit margin. Leds are not Nasa parts.

[@HeadlightRevolution]

These are made really, really well. I think you would be impressed.

[@leegacy3099]

@@HeadlightRevolution The least you could do is to add a beeper which can be disabled optionally.

[@wadepatton2433]

No profits no products and no profits no pimps for products -who do a great job of helping us select our ho's--I mean LIGHTS! Having been in retail, I totally respect any man or woman's ability to successfully start a business and keep it profitable and relevant. Pimpin' ain't easy, as Katt says. So long as products are moving the margins won't be changed.

[@davidcatlette9697]

LMC is 69.00 So price is pretty close ! HR has the better reputation !