Why You Should Avoid Multi-Sided LED Bulbs | Headlight Revolution

Shop from the best selection of LED bulbs here: www.headlightrevolution.com/b...
Looking to buy Multi-Sided LEDs for your vehicle? DON'T! Watch this video first!
In This video, Chris will be covering the main reasons why Multi-Sided LED DONT work in Reflector, Dual Beam, and Projector housings!
/-*/-*/-*/-*/-*/-*/-*/-*/-*/-*/-*/-*/-*/-*/-*/
Note: This video is for educational purposes only and may show street-use content with products that may not be DOT compliant for use on public roads. The video is not intended to imply vehicle-specific street legality. LED and HID bulbs are street legal in the USA for fog light use and not in low beam or high beam headlights because they are not compliant with DOT / FMVSS108. When looking for on-road-use headlight upgrades we recommend DOT-compliant headlight housings, not bulb replacements. Certain specialty vehicles strictly limited to off-street use and not having DOT registration or license plates may use these products exclusively off-streets. International street legality varies by country. For detailed clarification on-street use, go to www.headlightrevolution.com/s...
All Lighting Upgrades For Your Application: www.headlightrevolution.com/?...
/-*/-*/-*/-*/-*/-*/-*/-*/-*/-*/-*/-*/-*/-*/-*/
Table Of Contents
00:00 - 00:29 Introduction
00:30 - 06:13 The reasons why Multi-Sided LEDs DONT Work!
06:50 - 08:39 Reflector Housings
08:40 - 10:13 Dual Beam Housings
10:16 - 12:23 Projector Housings
/-*/-*/-*/-*/-*/-*/-*/-*/-*/-*/-*/-*/-*/-*/-*/
Fitment guaranteed! If it doesn’t work, we will solve the problem for you. We strive to give an excellent customer service experience. Our dedication to delivering on that promise is backed by a no-hassle return policy. We’ll provide a full refund on products returned within 30 days, no questions asked.
/-*/-*/-*/-*/-*/-*/-*/-*/-*/-*/-*/-*/-*/-*/-*/
Other videos that we recommend watching:
💡 Lighting Color Explained: • HID Color Temperature ...
💡 Are LED Bulbs Brighter than Halogen? • 100W Halogen VS LED Bu...
💡 Are LED Bulbs Brighter than HID? • HID vs LED - Which is ...
💡 LED Bulbs Brightness Shootout - which bulb is the brightest? • Best and Brightest? We...
💡 Which HID Kit Color is the brightest? • Which HID Color is the...
💡 The TRUTH about LED Bulbs! • The Truth about LED bu...
/-*/-*/-*/-*/-*/-*/-*/-*/-*/-*/-*/-*/-*/-*/-*/
For the best LED automotive lighting selection in the world, check us out here: headlightrevolution.com
If you have any questions about any of our products, email us at Sales@HeadlightRevolution or give us a call at [phone]!
/-*/-*/-*/-*/-*/-*/-*/-*/-*/-*/-*/-*/-*/-*/-*/
Find us on social media!
TikTok: / headlight_revolution
Facebook: / headlightrevolution
Instagram: / headlightrevolution
Pinterest: / headlightrevolution
Twitter: / headlightrevolu
LinkedIn: / headlight-revolution
We Do Lighting Better Because We Test!

[@L-Noble.YT_Hi.Res-Soundminds]

Thanks for the info. These tests are the only way to actually understand and learn. You just saved many people from buying these bulbs.

[@HeadlightRevolution]

We do our best to save you guy some time, energy and money!

[@OzcarMike641]

I was surely about to buy a 4 sided bulb.........

[@jorgen.zamora]

Sounds like advertising an specific brand too. ;)

[@pedrogonzalez-mw4jn]

@Headlight Revolution I have a 06 Honda pilot witch led can I use that's gonna give me good lighting was looking for something 6500k would appreciate the help

[@IvanSanchez-iw2ie]

Too late for me damm i already got my 4 sided led

[@CuthbertNibbles]

I absolutely love the style of these videos, explanation first, testing follows, no bullshit, no stalling to get video lengths up and increase as revenue, just top quality content. Thank you, this has made replacing the headlights on my car a walk in the park.

[@HeadlightRevolution]

Glad that this video helped you out, thank you for commenting and for the support! If there is anything else we can do for you, let us know! Have a great day!

[@noahkb80]

I gotta say man, you've taught me some stuff. It's like being at class for lighting. Ive seen those multi sided LED bulb. "Logic" would think that would work great. Until you gain actual knowledge how these things really work. Im a novice headlight expert just from watching your videos. You explain things perfectly. Great video dude!

[@HeadlightRevolution]

Thanks for watching!

[@TechWiz1983]

Excellent information; shared this video with a shop owner who was recommending the multi-sided LED bulbs to me. The more people that get a proper education on this matter-the better it is for everyone.

[@HeadlightRevolution]

That is very true, I'm glad we could help.

[@greg925911]

One dosen't have to sell anything just educate them an that will sell itself let them do their own research after that

[@louiewatson9389]

You're that guy... 🤦🏻‍♂️

[@grizzarcher4256]

This is, by far, the best video that explains everything perfectly. It makes narrowing the worthy candidate bulbs much easier!

[@rudyaguilar1802]

Going to be honest, I was very very sceptical about the whole thing until after I had watched the whole video I finally understood how it works, thank you so much for the brilliant information, instant sub and like 👍🏼

[@HeadlightRevolution]

No problem Rudy! Glad this was helpful for you!

[@davidriley9194]

I absolutely enjoyed watching this video! I find it really entertaining and you explained the different types of bulbs really well! I run LEDs in reflector headlights and they come out way brighter and way better. It depending on what bulb your looking for and like you said in the video, figure out the length and the width of the led bulb. A lot of people will say “No! You can’t use LEDs in reflector headlights! You’re blinding everybody!” I did have slightly shorter length LEDs in reflector headlights, I didn’t ever get flashed by oncoming cars, however, I’m always being a self conscious that the beam pattern isn’t brilliant and the cut off line isn’t great. I look into slightly longer ones which is Novsight ones again, it depends of how long and the width of the bulb you’re looking for. I gone for longer ones and the beam pattern comes out much better! Thank you so much for the info about the different bulbs!

[@crazytestpilot9434]

Wow, I am so pleased to finally see someone who actually does know what he's talking about. Great job explaining why leds dont work in halogen reflectors. Another aspect to consider is the kelvin factor. The AMA asserts that the super white or high kelvin bulbs actually cause your pupils to constrict reducing visibility further. We see best with sunlight about 4500k since millions of years of practice. Oh, and could you please do a video on how to, and the importance of adjusting headlights correctly. Seems like some people need that. Great job , thanks.

[@jeffhicks2070]

Oh they work ,maybe not as good ,but they still work .and bright to

[@khizertahir3]

Just wow. A lot of information for a new user in a single video. Totally loved the videos. Thanks for making it ♥

[@HeadlightRevolution]

My pleasure 😊

[@claudeperrault4164]

Excellent informative video, I wish that all videos were produced like yours! I learned a lot about LEDs. Thank you and keep up the good work!

[@HeadlightRevolution]

No problem!

[@KalLanPIDT]

I just went outside and turned my 2 sided LEDs 90 degrees (from vertical to horizontal) and I got better lights now, ty.

[@HeadlightRevolution]

I'm so glad you got it taken care of! That makes a huge difference.

[@jberkhimer]

I'm calling BS. Headlights are "clocked" so they only fit into a headlight housing one way.

[@HeadlightRevolution]

In a way, You're right. The headlight bulb collar can only be inserted and locked into place one way. From there, Most headlight bulbs can be adjusted or 'clocked' inside the collar itself. This will allow you to ensure the LEDs on the bulb are oriented properly in that particular headlight.

[@KalLanPIDT]

@@jberkhimer What you think matters very little to me, but you're also wrong. LEDSON LED 11G Xtreme (6000K) - H7 Is the name of the bulb. The collar can be turned all the way around, wich is fortunate cuz if the cable would have come out at the bottom they wouldn't have fit in my headlights.

[@jberkhimer]

@@KalLanPIDT Nope. Look at the bulb and it has a tab that aligns it. BS.

[@qpSubZeroqp]

Thank you for the awesome video. A lot of people don't think about the small details that make big differences. In my professional life I have seen people just don't care about these details and wonder why they put their projects fail

[@HeadlightRevolution]

Details are everything! Thank you for watching.

[@Lesiba2]

This video is definitely informative. I don't have a car yet, but I am planning to have one and the most important factor in selecting the best suitable car for me is headlights as I will be driving in all weather conditions and in daylight or night time, so I want to have reasonable visibility while driving at night and at the same time not blinding other drivers. Thank you man, I know what I want now

[@HeadlightRevolution]

So glad that this video helped you out, you are totally right, it is very important to be able to see well when driving in all conditions! If there is anything else we can do for you, let us know, we are here to help! Have a good one!

[@fdurango]

This video just made me remove the LED Bulbs in my cart and go for some others instead. Thanks for the masterclass man!

[@HeadlightRevolution]

We are always happy to help!

[@davidjack9217]

Thanks for keeping me on the correct path for my halogen projectors.

[@HeadlightRevolution]

Glad to help!

[@ChrisHally45]

Great video. I was trying to find fog light leds for my car online and felt overwhelmed and clueless. This may have saved me from making a terrible purchase I feel more knowledgeable now already. Thanks!

[@HeadlightRevolution]

Noproblem!

[@BroadwayLTDProductions]

I was just about to purchase a 360 degree bulb until I watched this video. Thanks for saving me $40!

[@techsir8866]

Awesome input on headlamp and headlight design characteristics, thank you for the video. New Sub.

[@HeadlightRevolution]

Awesome! We're glad to have you here!

[@favemediabureau]

One of the best educational videos in YT I reckon.

[@HeadlightRevolution]

We really appreciate that, Thank you.

[@jeremiahhall2281]

This was awesome!!! Thank you for teaching us the truth!!! Unfortunately too many people may know this, but not look fo the quality in the product. They want the look, and unfortunately it's blinding and not too many people care about it.

[@HeadlightRevolution]

Glad it was helpful!

[@alcameron6071]

Wow! Finally a video that tells the real story. This is absolutely the best video I have seen on LED lights. Thanks so much.

[@HeadlightRevolution]

You're very welcome, thanks so much for watching!

[@adibafiq6945]

oh my god thats why!!😭 i just bought a two sided led for my car which it has projector headlights, and i just figured that it does not compatible with it, that is why i felt so weird why it doesnt looks as bright as my other cars which uses different kind of headlights, thanks for the precise and very easy to understand explanation!!!❤

[@HeadlightRevolution]

🤘🤘

[@Headhunterzify]

I bought the two-sided thin LED, but the seller sent the four-sided LED. I thought my eyes were betraying me but it appears I was correct that the LED is not bright and doesn’t work as it should. Thank you for sharing!

[@HeadlightRevolution]

Not a problem, glad we could help with that! Sorry to hear that the multi-sided bulbs got sent to you! If you would like to get a new pair of bulbs on order, we are here to help! [e-mail]

[@DRedd1y0]

this video is incredibly helpful. People buy LEDs without ideas. After watching this video, I believe that many people have remembered that they bought the wrong things.

[@HeadlightRevolution]

Glad you liked the video!

[@mikeythocks]

Yes you are right about the 360 led on halogen reflector housing but in my case, tried so many LED bulbs and ended up in the 360 led. Im using stock projector bi beam on my car with the solenoid magnetic cutoff. I got a nice cutoff and a better high beam than most of the leds i tried. Thanks for the info as always!

[@HeadlightRevolution]

Glad that you liked this video, thanks for commenting! Let us know if you have any other questions, have a great day!

[@mattiahsq3607]

Very useful! Thank you so much , i almost bought a 4 sided led highlight , now i'm buying a very good 2 sided led highlight , god bless you. (Sorry if my english isn't perfect but i'm italian)

[@HeadlightRevolution]

I'm glad we were able to save you from a headache!

[@mrshilling]

Daaaamn I had almost just pressed the “confirm order” button. And I’m in Africa so you can imagine how much more money I was gonna spend to ship a worthless product. Thank you, you’re a wallet saver

[@HeadlightRevolution]

🤘🤘

[@skylinerztune]

thanks for the video man, i was thinking to change on led bulbs but i cant choose what type buy, this clarifies me at all

[@HeadlightRevolution]

You're welcome, Thank you for watching!

[@bricecooper7903]

Very informative. a ton of my buddy’s ask how I get a solid beam pattern with my FJ cruiser in aftermarket projection housings, and I almost always point them toward your channel; as well as I picked up some vision X Led 4.7in lights that I use for fog lights. I hardly have to use my high beams anymore

[@HeadlightRevolution]

That's so awesome! Thank you for the support, That means a lot to us.

[@scottdavis626]

Excellent video for driving lights. I have 360 in my fog lights with only the cone reflection surface. It works alot better than my stock bulbs. Maybe the others would be better. I don't know. Got them as a gift so that is what I use. When I have to change them I will look into a different style

[@scottsam100]

I put SL1 led lights in my 2015 Sierra and I love them! Didn't have to drill any holes because they are slim and was able to get the dust cap back on. If people would just do a little research before buying they could save themselves time and money.

[@HeadlightRevolution]

That's very true and that's why we're here! There is a lot of misinformation out there as well. The SL1 bulbs are a solid choice from a good company.

[@brandonlee93]

I never thought this content could be so interesting. Thanks for the video.

[@HeadlightRevolution]

Glad you enjoyed it!

[@jerryshurlow3090]

The Auxito 9012 with a thin separation of the two LEDs on either side at face value would seem to conform to your ideal LED bulb.

[@Adrianek81]

Great video,thanks for open my eyes,i dont use led headlight yet but now i will know in the future,regards from scotland😉

[@HeadlightRevolution]

I'm glad we could help you out, Thank you for watching.

[@mikewho9964]

Great educational video - good explanation and displays - someone who actually knows what they are doing ! Thank you

[@HeadlightRevolution]

Thank you!

[@petetherealrelentless6542]

These are great videos, really top notch.. too bad I started watching them AFTER I bought all my led headlights. 😂

[@HeadlightRevolution]

Thanks for the feedback.

[@thatfrenchcanadian5779]

Amazing, you got a new subscriber!!

[@HeadlightRevolution]

Welcome to the party! Thank you for joining us.

[@topnotchreviewer1429]

Great video and great information. I understand much better why you don't want to slap in any old LED bulb. Keep up you informative videos! Five thumbs up.

[@HeadlightRevolution]

Thanks for the comment, and for your support! I am glad that this video helped, if you need anything else just let us know! Have a good one!

[@ragbag46]

Thanks for this, I fitted a three element to my motorcycle headlamp and could not understand why it was so terrible, annoyed hell out of other oncoming vehicles and there was basically zero difference between high and low, now looking for proper 2 element LED.

[@HeadlightRevolution]

Reach out to our CS team so we can help you get that fixed up! 218-755-5200 [e-mail]

[@abod898]

Same as you 3 sided led lights looks cool from the outside but in duty it's terrible will try 2 sided one .

[@tubqhe]

I've always wondered seeing them 360 degrees bulbs online... now I know better, thanks so much. Very informative!

[@HeadlightRevolution]

You're welcome!

[@puneetbshah]

I just cancelled an order for 3 sided led headlight after watching the first 5 mins of the video. Thanks for the information

[@HeadlightRevolution]

Glad we could save you from that horror!😂 Let us know if you would like to get a pair of bulbs going, and we will be happy to help! [e-mail]

[@grey1wa]

Awesome information, I have a 2017 nissan Altima which uses a Combination projector low bean and a reflector High beam. so this helps, will also consider this when doing the Drl/fog lights

[@HeadlightRevolution]

Awesome, I’m glad we could help!

[@Soproni_Larynx_Forditoiroda]

Finally a great review with showing results.... Thank you for so much!

[@HeadlightRevolution]

Glad it was helpful!

[@kkampy4052]

This is a very well done presentation. Showing the actual light pattern is very helpful. I would be interested in a life expectancy test. A lot of these are very expensive and I hear stories about failing electronics due to heat. A lot of this is moot because so many idiots I pass at night are running their brights anyway and won't dim them down.

[@HeadlightRevolution]

Thank you for watching, We do our best to try and educate people on the best possible headlights for them that won't blind oncoming traffic!

[@nferrato1]

Thanks for the GREAT information!!

[@HeadlightRevolution]

Thank you for watching Nick!

[@wckdZ]

Excellent info and demonstrations, this should help a lot of people.

[@HeadlightRevolution]

Thank you for the support!

[@dangray5948]

I noticed the cone shaped led was only used in the halogen housing which I would have suspected would look like crap. But, if it was used in a projector housing with a shutter that calls for say a 9012 bulb, it seems to me that this would be an ideal situation, because the shutter would cut light from the end of the bulb in low beam and open the entire light source on high beam. Correct me if I'm wrong.

[@ricky302v8]

Of course you're correct but that wouldn't fit with *Headlight Revolution's* narrative.

[@mustafadere9819]

I watched this after I installed the 4 sided 9006 low beam led lights. I was using 2 sided 9006 LEDs and I saw 3-4 sided ones when I was browsing. Since their prices were very similar to my 2 sided ones, I decided to UPGRADE my low beams with the more powerful ones. Actually they are producing more light than my 2 sided ones in my case but the problem is they have vertically wider angle with the same headlights. I was trying to find out how to adjust the aim of the low and high beam lights separately because the upper line of 4 sided LEDs were quite higher than my high beams. I found only one adjustment bolt in my 2006 Honda Odyssey that adjusts the aim of the whole assembly. I am not a professional but if I understand everything correctly, there should be no way to adjust them properly while preserving the aim of the high beams. Because the additional sides of the 2 sided bulbs will always create a problem since they are not designed properly as you explained in this video. Thanks for sharing 👍

[@HeadlightRevolution]

That is the issue with those multi sided LEDs, they usually produce terrible beam patterns. If adjusting the headlights is not fixing anything, I hate to say it but the bulbs themselves may be causing the issue.

[@CeoOfSlow]

I got tired of trying to find a pair of led I liked so I spend the money and retrofitted projectors with hids. Completely worth every penny I spent

[@HeadlightRevolution]

A projector retrofit is still king as far as output goes!

[@EsenbekAliev_]

ULTRA2 was the best bulb I've ever used! Worth the money. I hope they are as good as in projectors in my 07 Reflector Odyssey headlight

[@gabrielabate6020]

Excellent video, very informative!

[@HeadlightRevolution]

Thank you for watching!

[@Burgattti]

Subscribed well done man, what a perfect video 10/10

[@HeadlightRevolution]

🙏🙏🙏

[@Fleepage]

Just bought the DD SL1's for my 18' Cruze w reflectors. Large improvement over halogen & very focused.

[@HeadlightRevolution]

Diode Dynamics is a solid choice.

[@gTosca_666]

Excellent information!!!

[@HeadlightRevolution]

Thank you!

[@renevp2]

Amazing, learned a lot with this video. Thanks!

[@ragswox5964]

sadly I had to learn this lesson the hard way. multiple sets of led lights later I found that my current v7 mini h4 LED's were what I needed

[@HeadlightRevolution]

I'm glad you finally got it all sorted out, That's all that matters!

[@lalamorena22]

Thanks! I greatly appreciate your help! It definitely guided me in making a better selection. My left bulb has now been randomly flickering on & off. Any tips?

[@KTMsoldier1988]

Might need a decoder. LED lights dont draw the same ammount of energy as halogens so the vehicle senses there is a short in some instances....my dads low beams would turn off every now and then until he installed a decoder.

[@wilsoncougar4267]

Whaoooo Excellent information You explain things perfectly.....

[@stephenumphress5705]

Those 360 style definitely don’t work for hi or low beam headlights,, but I use them for turns, brakes, DRLs, side markers, and all interior lights I realize it’s a headlight website, but just saying. Great information ! I’m addicted to this channel lol !

[@nascardrawings7700]

I really wanted to see what the results were for that cone shaped bulb in the projector light. I ran one before, I'm considering running it again. My housings are at max height and it's still too low, so I'm wanting to try different styles of bulbs. I'm currently using FAHREN 9005 HB3 2 sided bulbs on a 13 Dodge Dart withe Spec D Tuning sequential switchback headlamp assemblies.

[@eddyhtx124]

This video was very helpful I just put 4 sided led in my car and was wondering why my original lights worked better than my led so now I’m going to change them to right leds 👍

[@HeadlightRevolution]

Glad it helped

[@MuhammadShahid-pe6nw]

Today I wasted my money buying 4D and focus is out😔

[@shaung638]

Have you ever tested LED bulb in housing that are for off road equipment? The housing that I am wondering about were reflector style and generally used a 9005 bulb. Typically they were setup to produce either a trapezoidal or flood pattern. I assume the same basic apply for the trapezoidal hosing but what about the flood?

[@HeadlightRevolution]

A good set of LED bulbs should still imitate that same pattern, Especially if you go with something like the GTR Lighting Ultra Series 2 or the S-V.4

[@zr2zamboni906]

Wish I saw this before I bought my first set of LED headlights! Saw the same bad results you demonstrated - weak and unfocused light. DANGEROUS !!!

[@HeadlightRevolution]

We’ve always been so surprised by how bad those bulbs can be, Very scary!

[@Rei_n1]

As always you are the best!

[@HeadlightRevolution]

Awe shucks😊 Glad you liked it!😄

[@coskuarsiray]

great video! there are very thin bulbs with thinner heat sinks. they are almost better than halogens on reflectors.

[@HeadlightRevolution]

Thanks for the comment

[@andreyceciliano4048]

Amazing explanation thanks so much

[@HeadlightRevolution]

You're very welcome!

[@J0mac-666]

very informative vid. now am torn between going back to LEDs, as i had bought a set, or to go back to the original Halogens i had in before.. thanks...

[@HeadlightRevolution]

I would suggest going with a good LED bulb like the GTR Ultra 2 or the S-V.4!

[@karkerav1175]

Well many thanks for this extremely informative video... I was in a process of getting LED headlights having 2 LED on both side now I would go in for that single LED both side..also I have noticed many LED headlights have a spread with not so good illumination (rather a floodlight), often annoying for oncoming vehicles as well blinding illumination from rear following vehicle on a rear view mirror... would like to know which color temperature seems better I think almost all are in range of 5600-6000 kelvin...

[@mann_idonotreadreplies]

4000K is what you want. Easy on the eyes and you don't sacrifice a lot of light output. I try to convert all my lights to 4000k but it takes time, knowledge and money.

[@davidviner4932]

Very interesting, I prefer the natural light from filament bulbs

[@HeadlightRevolution]

Some people do, That's totally ok!

[@e.b.6766]

Great video... I learn something every time I watch!!!

[@HeadlightRevolution]

I'm glad you like them, Thank you for watching!

[@PH1M0]

Great review and info! 👏

[@HeadlightRevolution]

Glad it was helpful!

[@bruce-bruce7975]

I like technical science like this. Very cool.

[@HeadlightRevolution]

Thank you!!!

[@GreatWhite7]

They work fine in projector housings. I tried the normal LEDs in mine and it was terrible. Then I put the 360 bulbs in and they worked really well. And vice versa, the 360 was terrible in my reflector housing.

[@krypticdr4gon]

Exactly, I use them in my 2001 Ford focus and the headlights are better than they've ever been.... Everything he described was not the case for me, but I assume he's speaking for more modern headlight housings.

[@rairamz4326]

This was educational. I thought if you only change the halo bulb to led was automatically gonna work

[@brandonb88]

Thanks dude I was just about to order some 4 sided bulbs and regret it

[@Rehan334]

just have ordered a day ago my H4 double light led bulb. shall i make it 32 and take it, after receiving my parcel.........man u r simply supered.

[@HeadlightRevolution]

🙏

[@quecongnghia8529]

Very useful video. Thanks alot.

[@HeadlightRevolution]

Glad it was helpful!

[@douglasbell3344]

Thanks for using proper SI units.😀

[@KaiPonte]

Wow, learned a ton! Thanks.

[@HeadlightRevolution]

Glad it was helpful!

[@wkjeeping9053]

That's why I have 5k, 2 sided led, on a lifted jeep with led fogs too and with the low beam I have plenty of lighting for night driving and rarely use my brights any more

[@HeadlightRevolution]

That sounds like a good combination!

[@tonymcclendon-hobbytime7727]

Great useable information, thanks

[@HeadlightRevolution]

Glad you found this helpfull, if you need anything else just let us know!

[@qbukhari]

Can't thank you enough Learnt allot from your video

[@HeadlightRevolution]

Thanks for watching!

[@iicrazytomii]

Thanks for dumbing this down for the rest of us lol. Great video

[@HeadlightRevolution]

Glad you liked it!

[@MrJacobCastro]

Does this also apply to fog lights? The only fog lights that have worked properly for me are the 4 sided leds.

[@HeadlightRevolution]

This would apply to any bulb used for automotive lighting.

[@chrispulham4779]

Cheers ,,,,, i sure learnt something.. THANKYOU!

[@HeadlightRevolution]

Glad to help!

[@rcbronco7830]

Hi. Can you do a oem headlight assembly vs a cheap aftermarket headlight assembly light beam pattern?

[@HeadlightRevolution]

That sounds like a great video idea, We'll keep that in mind! Thank you!

[@ThreadStalker]

The Professor of Illumination. lol Feel like the scarecrow in the Wizard of Oz when he got his 'brains'. Fantastic breakdown & explanation!

[@dj_paultuk7052]

Is there a H1 LED bulb unit that actually works good enough for daily road use ?. Ive tried a few and they were all trash so im back with Nightbreaker Halogens for now. But would really like a 6000k LED with the same or better light output of a Halogen, but in a H1 format. Ive just not found any that are good enough. Can you help ?. Thankyou.

[@brandonyen7837]

I think you’re right I just installed an led with 4 sides in my Mercedes headlights didn’t work the light doesn’t shine far away and the lights just spread out not pointing to the road but no blind spot I hated it. I’ve used an Hid for more then 3 years and it works good but it just that I wanted to see far away that’s why I changed to LED . What can I use on my car headlights ?

[@HeadlightRevolution]

Send us an email to [e-mail] and we will get you exactly what you need for your vehicle. There are a few good options to choose from, We will get you taken care of!

[@fromthe306]

Vision Pro P series is an interesting bulb it's for projectors. It's Sit in the housing and the two chips are on either side like this...∆ it worked awesome on tests. Still two sided but led chips are positioned at 10 and 2 rather than 9 and 3. Your thoughts???

[@adamrouse7930]

I don't even watch the parts where you explain why or why not, i just trust you so much i only need the video title

[@HeadlightRevolution]

We appreciate the trust but we do recommend looking at the video for useful information.

[@matejkudlac]

I totally agree, that 2sided LEDs are the way to go. BUT I have headlight with separate high and low beam and it seems, that multiple-sided led would be better for high beam reflector. Yes, their light source may have larger area, but I don't think it is a downside in high beams. They may be hot, but I think that would be okay, because you don't use high beams for long periods of time. What do you think please?

[@HeadlightRevolution]

The issue with using multi sided LED bulbs for high beams would be the lack of brightness and also a terrible beam pattern. Even though you don't have to worry about blinding people when your high beams on (assuming no traffic is coming since they are on) you won't have the light going where it's needed. 2 Sided bulbs will still be better for high beam applications.

[@ColdChills01]

How would you compare all the two-sided LED light bulbs? Also, is there something on your website that I can see and compare which is best for a 7th gen Nissan Maxima? For fog lights as well

[@HeadlightRevolution]

Send us an email to [e-mail] and we'll help you get exactly what you need for your vehicle. We have many options for you and your Nissan Maxima.

[@abdullahkhalaf2964]

Hi ، please can u tell me which led headlight bulb is suitable for my For Flex 2015 reflector headlight,, thanks

[@still34u]

You're doing amazing job. Do bad most people are idiots and just buy whatever is cheapest or has the highest number. I even know a guy who was going for an LED bulb and I told him "You're gonna blind everybody with that" .. He told me "I know, it's awesome!"

[@HeadlightRevolution]

That's the last thing we want, We're doing our best to help people make good decisions for themselves AND for everyone else on the road too.

[@dmanrmc5641]

like the vid, I have a 2003 ford BA ute xr8 what led globes do you think i should use to upgrade. cheers

[@patriotcanuck6485]

Great video.👍

[@HeadlightRevolution]

Thanks, Dave!

[@aaronpoisson]

I have 2-sided Hikari Eye of Megatron LEDs but they don't work well in my projectors, they have light missing within the beam pattern and I don't think they are bright enough. Bought a HID kit that I'm going to test next.

[@HeadlightRevolution]

Let us know how it goes! Sometimes HID is still the king when it comes to beam pattern in certain headlights.

[@THEGENERALMAN]

So I know the results are in the vid but I've got some 4 sided led on a aftermarket housing that's probably off on the reflections so I've had best results with the 4 sided I've tried the 2 sided aswell not sure why

[@HeadlightRevolution]

Need to try some better 2 sided bulbs! 😉

[@videoviewer34]

Wish I had seen this before my failed purchase. Only $20 loss but unnecessary cost for education. Fog light replacement on my 2011 Equinox. Hoping to match my upgrade to the headlight's which work perfectly!! Theory seemed will founded...all those LED's should have lite up a football stadium. After install and facing the car, they didn't seem overly impressive but the light color matched the headlights... from behind the steering wheel I thought they had burnt out!! Being it was twilight outside at the time, I thought they would get better at full darkness. NOT! Turning the fog lights only on, was the only way I knew they were working. I literally had better down the road brightness holding my cellphone out the window with the flashlight on. Thanks for the info to understanding why it doesn't work!!!