Headset Assembly | Ride1UP 500 Series

[@andrewchristiansen-Detroit]

Tried the socket method as commenters here said. No matter how I angled the socket it wouldnt straighten out. Pounded it through, bent the tabs back on concrete with a hammer and the bottom row with pliers then used your screw method. Tapping on an angle really did the trick. Thank you as this bike build has been a pain in the rear. Thanks!

[@strangelylookingperson]

Thank you very much, really! That's an ideal video: no hot air, just explanation! Thanks.

[@syntheticsun]

Thank you, I so needed this.

[@ayala7282]

Same here, the manual doesn't show this part of the assembly. Got stuck

[@Jeoffery]

Thank u. My local mechanic ruined this steps and my bike handle is now stiff. I will disassemble and follow this steps

[@chickeee]

You just need to loosen the bolt

[@joseguardado8832]

@@chickeeewhich

[@chickeee]

The single bolt in the centre of stem

[@eduardvanderhoeven4913]

great video . not complicated and visually step for step perfect video. Well done ride up !

[@DilbiusFincharoo]

Straight to the point and just the video I was desperately in need of!!! Thank you 🙏

[@gavinirwin9675]

Thanks for actually showing me

[@Cydro12]

Real MVP right here

[@Johny40Se7en]

Thank you. Kept doing this wrong and had stupid play when braking 😐🥴 Can you do one for the bottom of the stem / steerer tube too please, I think I'm doing that wrong too...

[@rajibsiraji_BD-mo4fd4fn2p]

copy from @bhoot1702 (4 years ago): It's basically the same. You just need to keep balls up for down part and balls down on upper part like this video

[@reallytho99]

Do you have one showing the bottom?

[@jayteeseven0seven]

I know right🤷

[@bhoot1702]

It's basically the same. You just need to keep balls up for down part and balls down on upper part like this video

[@johnjay7445]

holy fuck why would u make a half video!!!!!!!

[@nofox777]

Well mine fell out today trying to put it together and can’t find it but this did help !

[@Adrian-sl3kk]

MVP! Thx for the help

[@leopemberton5439]

Hi is their a compression ring on the bottom of headset thank you great video

[@nultianeks]

No there isn't.

[@Divocwax]

Great! My Giant Alias uses these "caged" ball bearing type which are for a 1.25" diameter steerer tube, with 5/32" diameter balls, and there are 20 balls.

[@keenanmurray65]

My first spacer (sort of cone-shaped one) seems to have another small thin ring that doesn't show up in anybody's video, but seems to fit perfectly in an indention in the spacer. Has anyone else seen that small thin ring? I'm assuming it goes with the cone-shaped spacer, but wish it was in some video somewhere.

[@SteveL11]

It should go between 3 & 4 in this picture right? support.ride1up.com/support/solutions/articles/65000172325-core-5-assembly

[@keenanmurray65]

@@SteveL11 Unfortunately, I don't really remember now. It might be piece number 3 in the photo. Sorry.

[@Dusan4666]

Compression ring was not delivered with 700 bike ? The handlebar is stiff and not posible to turn.lol.

[@Ride1Up]

Sometimes the compression ring is spring loaded in the headset and pops out when the fork is installed. If not please contact our support team and share pictures www.Ride1UP.com/contact

[@Dusan4666]

I contacted support. They have sent me missing ring next day. All good. Thank you.

[@mtbridersingh4690]

Really thanku very much bro. I just needed this video.

[@davidchen7210]

Thanks so much for your video. Do you put grease in the fork and headset or leave everything dry?

[@般的な-y6z]

Grease the crown race, ang obviously the caged bearings

[@xvini256]

thank you i will have to try this right now my headset is all messed up and lose with parts in the wrong place.

[@Atrainswrld]

Do you add grease. Im about to put a fork on and need to know everthing grease. I have a redline 24in. Its aluminum and the fork was hi strength tinsile. I had a cult) BMX brand ) 26' fork laying around. I would have preferred a 24-in fork but this one's at least full chromo

[@edmejias7894]

Hi, the video was helpful. The only problem I ran into was when I tried putting the last smaller rubber piece (pressure washer with the spacer), it wouldn't go all the way down flush with the other pieces. Any suggestions? Thanks Ed

[@nikolavatkov]

Me too, any new info u discovered?

[@GoaldenShorts]

@@nikolavatkov Yeah me too!

[@Pesepedahandal]

Oh I think the location of the ball bearing is above, thank you

[@Jagking77]

Dude, I can’t tell which way is up in which ways down from this because you don’t show me the whole frame

[@gyawalisushant3030]

Thanks so muchhhhh ❤❤❤❤

[@galenweidman6198]

My compression ring doesn't go down at all, any ideas?

[@snoozymcgee4372]

Same

[@johnsheetz6639]

I know this is a long time ago but you wiggle your fork back and forth and it eventually will let you work it back in.

[@paderoarjaygante8457]

What size your caged bering

[@Claego]

Most people are not going to get the joke hidden underneath this video

[@andymcpherson9606]

Nice one❤

[@GANGSTASOUND]

Thanks for the video.

[@Ah1Sht1]

thank you! really

[@meshark_t]

Tnx, but need bottom bearings and stuff to be shown plz.

[@TerenceJoyner1]

Why isn't there a actually core 5 assemble? I could really use one

[@juanmiguelvanzuela3787]

Sht thank you for this video

[@bangtps4285]

whats the size of the bearings?

[@educatedbhaiya5394]

where i found this bearing

[@bloomsworkz9093]

What is the size of ball bearing??

[@digambarpatil5785]

*Easy to setup and maintain.*

[@Ride1Up]

Thank you, cleaning and lubricating the chain can give you many trouble free miles.

[@icetoma15]

Thank you

[@joseguzman928]

Thank You!

[@WestHaddnin]

Thanks man

[@cineflexstudio7772]

Anyone no that single bearing price what argent

[@shivarajgurikar9724]

1 set yestu anna beringu

[@EletronicaCatia]

perfeito

[@paderoarjaygante8457]

Lods ano size ng headset mo

[@GaLaxY-1905]

First of all learn how to hold the camera

[@rhue_james7]

What size bearing?