This short video leads you step by step for restoring the spring tension of a retractable roll up frame supplied by Health Education Resources.
Пікірлер: 102
@arwyss2 жыл бұрын
This video really got me out of a jam today. Thank you so much! You’re still helping people out in 2022.
@AegisComicsAlaska2 жыл бұрын
You just saved me $200 and removed my need for blood pressure medicine with your calm demeanor. Thank you!
@danielrosin-b8lАй бұрын
G-d bless you! I had a last minute order for several of these. I came up one stand short, except for a broken one I had in the corner of my shop,i found this video and was able to repair it Ty!
@freydasmith70872 жыл бұрын
An answer to prayer... Thanks Mr. Cleveland - My Moms in Prayer banner is ready to go. Thanks for this video!!!
@AlanThomas19 жыл бұрын
Why you would decide to make a video about this, I don't know. But I'm sure glad you did. Super helpful. Thanks!
@peteraddison83237 жыл бұрын
Im sure he said "God bless you in your ministry" a real man not afraid to bless in the name of the Lord
@JimHarrer3 жыл бұрын
Thanks, exactly what I needed to learn Mr. Cleveland. Appreciate the time you took to share.
@jtillman3rd4 жыл бұрын
5 Star Review coming here!! I had an old projector screen that I haven't been able to roll up for about 7 years now. I was about to finally replace it until I saw your tutorial. OMG, thank God I did! Now I am not mechanically inclined at all, but I did follow your video to a tee and got my projector screen to roll up just like when I first bought it. And it only took me less than 15 minutes to do.... all by myself! I feel so dumb for waiting this long, but thank you sooooo much for your tutorial.
@Marc-oc9hg Жыл бұрын
excellent vídeo Charles! Thank you very much! It got me out of a jam. Tip: Since I didn't have the thin needle nose pairs appliers and the vice grips, I used the side cap itself to roll and hold at the same time.
@RooBee502 жыл бұрын
THANK YOU for this video. BEST one out there on restoring spring tension!!!
@cliffdevries65193 жыл бұрын
Thank you for your help. You saved me at least $50 for a new projector screen.
@KidzTVArya Жыл бұрын
really good video....... You saved my Time and money
@MrOPORA9 жыл бұрын
Thank you Mr Cleveland! You saved us! Greetings from Russia!
@maggielee856611 жыл бұрын
Very helpful - thanks to your instructions, our roller blinds are fixed. We'd been scratching our heads for at least an hour over it. Thank you!
@MrDonKain9 жыл бұрын
very useful u saved me, thank u from Spain Mr. Cleveland.
@phillypauly7 жыл бұрын
you have just blessed my ministry. I nearly lost my christianity trying to fix this thing.
@seormocha Жыл бұрын
Thanks! Simply, effective, clear.
@cibermae19706 жыл бұрын
Thank you, Mr Cleveland, it worked perfectly. From Naranjo, Costa Rica, thank you very much.
@HealthEducResources6 жыл бұрын
Great, glad to hear that
@Macaruba6662 жыл бұрын
Thank you for this, I’ve used it a number of times now!
@joeygallegos54429 жыл бұрын
thank you so much. Just a thought, you can also hold the other end with another pair of vice grips locked in place.
@sheryang11855 ай бұрын
Thank you! This video was such a big help!
@MOR444555 жыл бұрын
Thank you very much. Very useful information. Greetings from Spain!
@rahulfadikar37953 ай бұрын
Thank you sir it was very helpful for me.
@richardsmith85323 жыл бұрын
thank you from good old blighty for this. just waiting for the glue to harden to adhere the blind back together and rewind as per this video.
@gont1553 Жыл бұрын
Thanks that was very very helpful 🖤........
@sarthakharekrishna Жыл бұрын
Your video helped me today, 5 jan 2023
@marialuisapereyra46629 жыл бұрын
Muchas gracias señor Cleveland. Thank you so much. It was very useful.
@mannixtan7268 Жыл бұрын
Very helpful video.😃👍
@rodritchie45556 жыл бұрын
God bless you for your video. I used the principles in it to fix a large front of house screen in our church. Similar to Henry P. below, I was also able to use the end handle itself to tighten the spring. Many thanks.
@nestorlima9836 Жыл бұрын
Exactly what I needed, thank you so much!
@RobertKing20127 жыл бұрын
Great job you explain very well. Just saved me $75 now I can just order a new banner and replace it, thx
@HealthEducResources7 жыл бұрын
Way to go!
@unwantedillusions10 жыл бұрын
Thanks a lot Mr. Cleveland, It's a really helpful video.
@mightytorrente79932 жыл бұрын
Thank you, your video is very helpful
@ernestoernest26343 жыл бұрын
this really helped me today, thanks a lot..
@glaubergiscardribeirocouti27142 жыл бұрын
Thank's! God bless you too.
@paul188962 жыл бұрын
Waoooo ,it really works, thanks Man 👍👍👍
@fredericserant32064 жыл бұрын
Thanks from France ;-)
@dorothybooraem66893 жыл бұрын
Thanks so much for making this and posting it!
@AniridiaNetUK11 жыл бұрын
Outstanding thanks it works! But you can do it just by unscrewing the end and tightening it without removing the cap but so it can rotate as well. If you do this with it standing vertical and between your knees its easy.
@BurnAlong2 жыл бұрын
Still helpful in 2022, thank you!
@bertinogomez68886 жыл бұрын
Very useful, you safe my life Mr Clevelan
@mohamadnabiei54023 жыл бұрын
Thanks so much. Helpful
@waynoodonnell55324 жыл бұрын
thanks for your time well met helped a lot
@joshuadaley166 жыл бұрын
Thanks so much! I got it fixed, but now I am still wondering, did I break it? Or was it broken when it arrived? What is that little key for? Am I supposed to put that in the hole before I use it? SO many questions, and the idiots sent zero instructions.
@physiolympha7 ай бұрын
Prefecture explained cheers
@emilyclark159711 жыл бұрын
Very helpful! Thanks for all the detailed steps...we fixed out
@angelconesallc4153 Жыл бұрын
Thanks dude ! Att signarama PF Tx.
@charliem47673 жыл бұрын
Genius..!!! Thank's
@tonnymarrufo1233 жыл бұрын
Thank you brother, Yesterday I had to fix 3 and I couldn't do any.
@maurenpardo Жыл бұрын
Thank you! I was about to cry 😅 because I couldn’t figure it out 😂
@bringyourmains66085 жыл бұрын
Thank you sir, very glad you did this
@christophernelson9788 жыл бұрын
What needs repairing on mine is that the actual spring has lost its tension from end to end, how do you fix that back.
@illisandor99599 жыл бұрын
Thanks a lot Mr. Clevelamd!
@dgw40493 жыл бұрын
U da man!
@henryp.28617 жыл бұрын
Do not remove end cap. Loosen all screws at the slotted end, leave end cap on, but with all the screws off , you can just turn whole end cap. No need for vise grips or needle nose pliers.
@HealthEducResources7 жыл бұрын
That's a good point, and it can work well also, thank you.
@MrNoyoki3 жыл бұрын
Ĺ
@eduardoomar82133 жыл бұрын
i know im randomly asking but does anybody know a tool to log back into an instagram account? I stupidly lost my account password. I would appreciate any tips you can offer me.
@terrywaylon85213 жыл бұрын
@Eduardo Omar Instablaster ;)
@eduardoomar82133 жыл бұрын
@Terry Waylon Thanks so much for your reply. I found the site thru google and I'm in the hacking process atm. I see it takes a while so I will get back to you later when my account password hopefully is recovered.
@jaas66610 жыл бұрын
You can use the vise grip with the en cap in place.. a lot easier than holding it with the pliers...
@joshuadaley166 жыл бұрын
Not if it went inside, though. Mine went inside during shipping, so it wasn't even sticking out!
@reginaldcortez87633 жыл бұрын
Can this process be completed when entire shade is still hang in place ?
@fulllifemarketing45326 жыл бұрын
Henry P is correct. I could never transition from the vice grip to the needle nose. Just wound it with the endcap instead.
@Berluskony12 жыл бұрын
I used to repair rollup only a screwdriver. Winded end cap without removing it. It is much easier ;-) Я для ремонта роллапа использовал только отвёртку. Наматывал торцевой крышкой не снимая ее. Это намного проще ;-)
@AfzalKhan-bx8hp6 жыл бұрын
Семен Семенов o
@AfzalKhan-bx8hp6 жыл бұрын
I O
@naveensahabandu1152 жыл бұрын
Hi sir... may i know why pullup banner bend front after....
@slametmuharis32515 жыл бұрын
Thanks u from indonesia.... 👍👍
@mhSmits-nl5xk8 жыл бұрын
Thanks Charles!
@vrnn6102 Жыл бұрын
Thank you sir 🥳🥳🥳🥳
@acevedogerman54135 жыл бұрын
Thank you Mr !!
@ervinvitek33062 жыл бұрын
little improvement: u dont have to use pliers and tools, just use console, bit easier, jist did it thanks for inspiration
@HealthEducResources9 жыл бұрын
Thanks Joey, that's a valid point.
@VictorUmeh Жыл бұрын
Thank you
@jgilesh8 жыл бұрын
Thanks a lot! It's very clear =D
@uncledaku73825 жыл бұрын
God Bless YOu Sir
@imprimerielina9497 жыл бұрын
thx so much sir, u really save my day :D really appreciate that (y) (y) (y)
@nicolasguarin33025 жыл бұрын
Thank you!
@benosotrossomosequipo85608 жыл бұрын
thanks good video
@sajankumarslimillionaire7030 Жыл бұрын
What to do when back stick broken
@spikemcclure40523 жыл бұрын
Thanks for the tutorial! Why did I waist an hour trying to figure it out by myself?
@TwoMaga4 жыл бұрын
Мужик, ты красава
@alytaromy3 жыл бұрын
God bless you too 😉
@sojoudhussein9 жыл бұрын
What do i do if i lose the other end and the spring gets messed up?? 😓
@olinsoto93666 жыл бұрын
Thanks!
@paulofigueiredo69317 жыл бұрын
excelent!
@amedjamesrafaelo7675 жыл бұрын
Excelente
@wmswrld9 жыл бұрын
thank man
@Blem4Life42011 жыл бұрын
This has changed my fucking life
7 жыл бұрын
Thanks a lot.
@SiwachHandwritingClasses6 жыл бұрын
Fine sir so thanks
@samsobaka9 жыл бұрын
молодец
@helterskelter4852 ай бұрын
Punya kita dol cokk gimana anjir
@xavieroshiro32572 жыл бұрын
muy mal, grabare uno mejor!, asi provocaras accidentes!