Dude for sure.... no point in paying like 2-3000 for a corsa system when flowmaster has been doing it longer and it’s cheaper . Sounds badass . Same exact setup I had on my 09 RT .
@johnhowl68276 жыл бұрын
Samantha Sirmans $1600 corsa extreme . Save the flowmasters for the mustangs lol
@SamS-sy8uv6 жыл бұрын
Lol this is alex Samantha’s dude , i use her account... but maybe your right with corsa I’d have to hear in person. I like raspy sounding exhaust
@1SLOWCAT5 жыл бұрын
Thats the dumbest shit I have heard, you cant compare a cheap ass system to a high quality exhaust. Flowmaster is absolutely trash compared to corsa or borla.
@PawlDunken5 жыл бұрын
@@1SLOWCAT fuck that shit
@beastfromtheeast93185 жыл бұрын
Angel Brahh lol, fuck corsa that overpriced shit. And for what? 1 hp more than a flow master setup. So you paid $1000 more for 1 hp.
@FlowmasterInc6 жыл бұрын
Sounds EPIC! Thanks for the support, loved the video.
@hectorgaona39566 жыл бұрын
Hey I just installed 2 super 10s in my 94 9c1 caprice and removed the cats but still have the reasonators but it sounds like if I did nothing at all.smh.can you please let me know what I'm doing wrong? (Plus car has short headers)
@FlowmasterInc6 жыл бұрын
With that free-flowing of an exhaust system it's very odd that the tone or aggressiveness of your vehicle has not changed. The Super 10 is our most aggressive street muffler that we recommend and with the exhaust modifications that you've done your Caprice should sound mean. Have you approached the installer with this issue? Our mufflers are directional and must be mounted with the inlets and outlets in the correct locations. You may also want to contact us at 707-544-4761 and our Support Team will gladly answer any questions that you have.
@cnmontoastcrunch89576 жыл бұрын
Hey flow master what’s the part number for this muffler
@prestonrieger84106 жыл бұрын
Super 10's free flowing? BAHAHAHA lmao . Flowmaster super 10's are a lot of things but free flowing isn't one of them. 😂 . I love it when the competition comes up and says they stepped up to flowmaster exhaust. I'm like sweet...I'll see ya when you catch up.
@ragintaurusmusclemercury70236 жыл бұрын
Preston Rieger What are you running if I may ask?
@TynarusSoftware6 жыл бұрын
Not sure why there's so much hate for the Flowmasters. I absolutely love the sound of Super 10's with a reso delete on my R/T. Get compliments on it constantly. Sounds amazing man!
@tmansupra6 жыл бұрын
Tynarus I think its cause the audio isn't doing it justice. I get compliments on the exhaust as well whenever I take it out. I am however changing it out soon. So, stay tuned.
@TynarusSoftware6 жыл бұрын
Walkin Mad definitely will! The wife and I are considering trading our R/T and Scat for a Hellcat, so trying to get some exhaust ideas haha.
@JAKDRZR2 жыл бұрын
Biggest problem with flowmaster chambered mufflers is they don’t flow well at all and on a hellcat probably give up 50 hp.
@jerryrivera77042 жыл бұрын
@@JAKDRZR depends Wich ones u get
@JAKDRZR2 жыл бұрын
@@jerryrivera7704 as I said. Any of the chambered ones. Like not straight through designs. IE any of them with a wing or door inside and no packing.
@lequentinmaxwell36136 жыл бұрын
That’s cool bro. I just moved from NC 5 years ago. Seems like the shop is Greensboro. Keep up the great work bro, you’re doing something that I always wanted to.
@TrustNone353 жыл бұрын
Damn, you unleashed the beast! Sounds incredible!!
@tmansupra3 жыл бұрын
Thanks
@jimcole26486 жыл бұрын
Love the supers. World of a difference in sound
@pjgallag6 жыл бұрын
Just did the same thing to my 300, sounds amazing. Those Flowmaster Super 10's really bring out that V8 rumble.
@__2Face300__6 жыл бұрын
Yessir Merican Muffler in Greensboro does the best hand down
@lukesil78876 жыл бұрын
Sounds Badass! I like the part with the Resonator delete the best.
@HOTRODRICO5 жыл бұрын
i was gonna say you need to remove the resonators and you did not disappoint =)
@jimdavidson52086 жыл бұрын
Sounds like a V-6. You want even better sound? Route the pipes INSIDE the car. DUDE it ROCKS.
@mikesmith87825 жыл бұрын
🤣🤣🤣🤣😂
@iroc86537 жыл бұрын
Feeling that rumble...... nice sound. Thanks for helping me make my mind up. Super 10's it is.
@tmansupra7 жыл бұрын
Stacey Roberson hope you enjoy it, it's now October and I don't experience any drone while driving. Just the initial start. But than again I only put 2,000 miles on it since the install. I get compliments from the shows I go to and the people on the street saying it sounds awesome and better than their stock hellcat.
@TruckLifeProductions6 жыл бұрын
Sweet sounding hellcat dude I’m about 30 mins from that muffler shop so I’ll probably check em out for my Ram
@bigdaddytrucker83126 жыл бұрын
Sounds awesome ,dodge still puts mufflers mid way on car thats one thing i hate about my mustang is that muffler set up out back cars sound way better like the challenger good video bro.
@tmansupra6 жыл бұрын
Bigdaddytrucker thank you, hope you keep watching and get entertained. See you around.
@wademccowen82537 жыл бұрын
OMG- THOSE DUDES CAN WELD!! BEAUTIFUL WORK, SOUNDS GREAT TOO
@tmansupra7 жыл бұрын
Thanks man, the low rumble in idle and the nascar race sound with wide open throttle is what I was going for. The active exhaust from the factory helps with that as well.
@josepanchosolis4 жыл бұрын
Oh man! I was LOVING it with the resonators. I feel like the deletes are over done with mustangs owners having a hard on with them gone
@tmansupra4 жыл бұрын
In person sounds the best. Audio on a GoPro 3 isn't the best st all compare to now a days.
@pitbullfarmer346 жыл бұрын
Nice sound man. Dont mind the haters. We all have that perfect sound we shoot for. Nice car. Would love to hear a couple highway hammer downs lol
@tmansupra6 жыл бұрын
You got it.
@acts22116 жыл бұрын
Real nice sound from mustang guy. Cannot beat Flowmasters . why more people don't put Flowmasters on a V8 is beyond me...
@Sbc6448 ай бұрын
Is that Sal from impractical jokers?
@Lost_Caws8 ай бұрын
Hahaha, every time.
@motorman111jld5 жыл бұрын
This is absolutely what I would have done! My last truck I had was a 1997 Chevy Z71 no catalytic converters, true duals back to 20 inch long 5 inch diameter tips. Wow it was nice!!!
@timothyconnell29336 жыл бұрын
Time for long tube headers.My first time on your channel. That destroyer grey is way to go!!
@phoenixblack12205 жыл бұрын
Awesome sound man! Glad your not in California. Cops enforcing the muffler noise law left and right on newer cars.
@tmansupra5 жыл бұрын
Holy shit. I've seen some videos of youtubers over there. Not having fun at all out there anymore.
@phoenixblack12205 жыл бұрын
Walkin Mad me too. It seems they are mainly picking on tuner kids and guys and gals with newer cars with modded exhaust. I keep my newer cars stock, and hope they leave me alone with my classic.
@tmansupra5 жыл бұрын
@@phoenixblack1220 gotta leave the classics alone. They sound their best when its straight dumped anyway.
@phoenixblack12205 жыл бұрын
Walkin Mad I have Pypes Violator on my car and I love it. Straight pipes sounded a bit much on my car and I would garner more attention than I wanted.
@RamMan20166 жыл бұрын
After one month back in 2016 when I bought my ram brand new, I put the flowmaster 50 HD on that is specifically for the rams. Then a year after I did the resonator delete.
@Martin750hp7 жыл бұрын
About fucking time people with these badass cars use MUFFLERS! And not use resonators and stupidass cherry bombs thats all one hears! And not the motors exsaust, but! Now with mufflers cats straight out the pipes sounds better and will perform better.
@tmansupra7 жыл бұрын
Yeah, I'm in the middle of researching some high flow cats. I still wanna stay compliant to pass the emissions testing.
@rhurtadorh327 жыл бұрын
martin750hp i had flowmaster 40s on my 05 magnum rt and i took them off and also deleted the resonators👍
@brianroagers68945 жыл бұрын
Super 10’s are an excellent sounding single chamber muffler I ran them on my SS and miss them a lot honestly! Nice burbble at idle deep tone nice growl but a very wicked snarl on decel in gear after a red line! Great performance but only if they made them in stainless! Now running 3” x pipe sounds deep but miss the snarl of a flow master!!!!!! Cool car
@tmansupra5 жыл бұрын
Thanks. I gotta check your car out. Hope everyone will like my update when I go to Black Widow.
@brianroagers68945 жыл бұрын
Walkin Mad I’m sure they will if not there obviously just haters!
@braxtonyates72746 жыл бұрын
In love with that sound she sounds amazing
@hemi5.7villain3 жыл бұрын
Nicely done Sir I have a dual set up with a X pipe getting short tube headers hade scat pack won't fit my muffler shop guy said
@tmansupra3 жыл бұрын
Im sure it sounds bad ass too. Let me know how it went.
@samanosukeakechi43882 жыл бұрын
Nice! I just did a plain mid delete, wanted some Outlaws too, but once I move to a different area Im gonna straight pipe it 😆
@Lost_Caws2 жыл бұрын
Straight pipe is gonna be sick. Loud as fuck in the cab but bad ass sounding outside.
@orbitaljellyfish8082 жыл бұрын
It sounds waaayyy better than most dodges and better than I expected Prefer the resonators only because it’s a manifold setup. Some long tubes would be awesome
@_Nasty3457 жыл бұрын
I think it sounds awesome thinking about doing the super 10s on my charger rt
@tmansupra7 жыл бұрын
Alex Marino, it's good if you like that low rumble. I enjoy it and can still hold a conversation in the cabin.
@NinjaWarriorDude4167 жыл бұрын
Alex Marino I put the Flowmaster 40's on my old 2012 R/T... It sounded too loud. Too much drone. Super 10's are not droney.
@Jimmyxsx7 жыл бұрын
Alex Marino use corsa instead you wont regret it.
@PawlDunken5 жыл бұрын
@@NinjaWarriorDude416 right I got original 40s on my rt they dorney as hell
@wbhink35 жыл бұрын
Sounded deeper and more tuned with the 10s and the resonators, but sounds good never the less!
@coltonsmith92543 жыл бұрын
I got a single 3 in 3 out on my 02 silverado with longtubes and no cats. Im going to order another and make it true duals 🤘🤘🤘
@tmansupra3 жыл бұрын
Can't go wrong with true duals.
@mopard25656 жыл бұрын
Nice Sound with Flowmasters and No Resonator !!
@tmansupra6 жыл бұрын
Dwayne stephen Thanks, I really like the low growl whole cruising in parkin lots at car shows.
@GS-jk4cs9 ай бұрын
Very nice!! 👍
@ryants16 жыл бұрын
Sounded so much better in the “before” clip. my buddies old ‘02 mustang sounds better than the “after” clip even does
@mustang82063 жыл бұрын
Wrong
@TNE_tv4 жыл бұрын
Is it possible to do put super 10 in mid and outlaws in the rear ?
@tmansupra4 жыл бұрын
Yes it is possible. Let me know how it goes. I would like to know how it sounds.
@TNE_tv4 жыл бұрын
Walkin Mad thanks Just order a 2020 Challenger widebody should be here next week 🔥. I already brought stuff for it such as an intake. I can’t wait to deliver it My channel Subscribe heat is coming soon 🔥🔥 kzbin.info/door/5Z8LnQU4DuKFataPtRXXiw Subscribe heat is coming soon 🔥🔥
@TNE_tv4 жыл бұрын
Walkin Mad + great vid
@muffdiver76705 жыл бұрын
So did the Flowmasters take away the crackling? Sounded like it at 2:28!
@tmansupra5 жыл бұрын
No it didn't, my old gopro hero 3 camera really sucks at recording sound. My more current videos, when I finally have a garage, is the starting point of using my new at the time camera gopro hero 5. But the crackles are still there and easy to make.
@ChaceMountains5 жыл бұрын
Just came across this video. That sound is pure magic lol.
@biggrobb15516 жыл бұрын
Sounds great , but add you a X pipe and you will really crank up the volume
@JahsonnM3135 жыл бұрын
Yes it will.
@cjgordon225 жыл бұрын
They already have a x pipe from the factory
@biggrobb15516 жыл бұрын
I have a 2016 mustang with resonator delete - X pipe and flow master 10 s and I love the DEEP GROWL !!!##!#
@mr.kickback76384 жыл бұрын
DAMMIT HOMEBOY SOUNDS SO BADASS 4REALS💪🔊🎶🎵🎶💯💯💯💯💯THATS MY NEXT EXHAUST SET UP FOR MY 83 GMC JIMMY 4X4, MY 83 GOTS EDDLEBROCK 350 CRATE MOTOR, 40 SERIES FLOWMASTER EXHAUST, 4 INCH LIFT, 33s MUD CLAWS, 15 INCH MICKEY THOMPSON EAGLE ALLOYS RIMS, RANCHO SHOCKS, BLUE TOP OPTIMA BATTERY & MSD TUNE UP KIT.💪💪💪💪💪💪
@TheUndecidedFamily7 жыл бұрын
I removed my mids on A 300S 3.6 V6 and it now has no low end. Wondering if it is something else. Help
@DigitalCarAddict6 жыл бұрын
I honestly hate the 2017 updated wheels. They don't even offer the old ones in black for the hellcats anymore. Only the BrassMonkey ones :/ This is why I'm buying a used 2015 in the rare sublime green and black wheels 👌
@tmansupra6 жыл бұрын
Digital Car Addict, keep watching for my new wheels. Hope the arrive very fucking soon.
@DigitalCarAddict6 жыл бұрын
Walkin Mad awesome. Glad to hear you're getting a different set👍
@ronaldmozolic87176 жыл бұрын
Poor baby did your mommy but you the car
@DigitalCarAddict6 жыл бұрын
Ronald Mozolic I got the car in May. I make the payments using some of the money I make from KZbin. I don't think "mommy" would approve of her son driving a bright green 700hp car to college every day. So I bought it myself.
@sswcubes6 жыл бұрын
Borla xr1 would have built a smile on your face from one ear to the other..
@isaher236 жыл бұрын
I love that sound. Super 10 👌👌👌
@Bloodlust98966 жыл бұрын
Mid mufflers are the resonators. End mufflers are just called mufflers. You flip the super 10/pipe setup then you you’ll get a better result.
@tmansupra6 жыл бұрын
I figured it's the same, it's just pipe to mufflers to pipe no matter what end it's at.
@Bloodlust98966 жыл бұрын
Walkin Mad well your posted setup is good for keeping boost and no loss of HP but each one makes a difference. When it comes to sound. Nice sounds all round👍🏽
@tmansupra6 жыл бұрын
@@Bloodlust9896 Yeah, I see what you're saying. Thanks man.
@markbreaux66137 жыл бұрын
Needs a nasty cam idle to complete that sound fo sho! Sounds great so far though!
@tmansupra7 жыл бұрын
I completely agree, hopefully sooner than later.
@Ian-xw1ge6 жыл бұрын
I can't wait to put them on my SRT8 392. Beautiful sound.
@ronaldeverson68485 жыл бұрын
You did it right I have a SRT Chrysler 2008 I cut everything off after the catalytic converters and put the super tens, it sounds wonderful I'm in Cali the cops never f*** with me, I also have a 2008 Nissan Armada I put the super tens on the same way,, sounds like a beast!! people swear I have a street legal cam(or something) when they ask me I just play it off with uh slight grunt and change the subject😉,,👍👍👍 your car sounds great....
@tmansupra5 жыл бұрын
Thanks man, I bet that sounds cool as hell too on both those rides. I love the pop pops this muffler makes.
@ronaldeverson68485 жыл бұрын
@@tmansupra me too!!!🖖
@ladycococrown4 жыл бұрын
Any drone when u let up off gas,
@tmansupra4 жыл бұрын
Not really, I can hear my music cleR and hold a conversation clear too
@shelbysnow79687 жыл бұрын
STOP The music please
@tmansupra7 жыл бұрын
I'll see if I can replace it, it was my first video and I had no tracks to use at the time of uploading. I do have more to come and hope you come back to watch. Mods and change up in my garage fleet.
@rodleypumpkins41746 жыл бұрын
2:15 to skip the bs
@choward8746 жыл бұрын
Sounds badass! I have 40's on my truck no cat's and it sounds awesome!
@sdb20055 жыл бұрын
Then don't complain and watch truck not fast car dude
@cristianchavez3044 жыл бұрын
What's the difference between putting the super 10 in the middle of the car or putting them towards the back end of the car?
@tmansupra4 жыл бұрын
No difference at all. I just didnt want the see them bulging from the rear. I kinda wanted that straight pipe look when it's at first glance without it being as such.
@Octane-monkey2 жыл бұрын
Do u happen to remember part number of these mufflers???
@tmansupra2 жыл бұрын
I'm sorry. I can not remember the part number. I know I gave that answer to a few of the many comments here. But I can't find the reply. Sorry. 😞
@spoonfixer33876 жыл бұрын
Nice sound. Well done and kudos sir.
@RetroCOBRA7 жыл бұрын
Put the flowmasters where the resonators where and that's the sound you really looking for. Thank me later 😊
@josherickson42117 жыл бұрын
94SN95 DMAN do u have a video of it?
@riskybiscuit55947 жыл бұрын
R4SN95 knows the deal. 100% agree 👍👍
@RetroCOBRA7 жыл бұрын
Josh Erickson nah no video I just have a good ear for sound and types of mufflers. Check out my old coyote I had
@scottp67616 жыл бұрын
94SN95 DMAN so your saying putting the flowmaster all the way in back is better than middle of car? I have 40 series on my SRT in middle and a vibrant reso in back. I think it's too quiet and honestly would rather have the muffler in back. You think it changes the drone frequency and where you hear it putting them in back?
@dakotafrederick49096 жыл бұрын
I have 2012 R/T Classic 5speed auto with FM40's where the resonators were. Sounds good but the drone is insane. None on cold start but after warm up I get insane drone around cruising speeds (35-45 city, 70+ hwy). When not on the throttle I cannot hear the radio the resonance is so loud. Gives me headaches on 30mi trips. Only way to quiet the sound is to put in paddle shift mode, but it only quiets it to a tolerable level. I'm going to have a shop redo the work and install them like Walkin Mad's.
@hubercortes68912 жыл бұрын
Very nice sounds se podrá poner esos dos a una GMC sierra 2013?
@Lost_Caws2 жыл бұрын
Claro que si., let me know how it goes
@hubercortes68912 жыл бұрын
@@Lost_Caws gracias brother poquito inglés sorry
@CrazyGreek804 жыл бұрын
On another note I read what you wrote and I agree 100% cannot stand the corsa extremes my neighbor has them on his 2019 GT mustang and it sounds like shit way to raspy no bassy hollow sound like my 98 cobra had when I had two chamber flos nice low rumble. Beautiful car hopefully in a year I can get one when the world is back to normal.
@tmansupra4 жыл бұрын
It is a fun ride. I hope you get it.
@TheHellkapRides Жыл бұрын
Yo my man! So are those Super 10s the 2.5 or 3.0 inch inlet/out? Doing this next week about to order them…pipes are 2.75 inch…muffler shop told me to get 2.5…Thanks!!
@Lost_Caws Жыл бұрын
I believe it was 2.75 in/out. They make that option. Just not always stocked in shelves. Thats probably why he suggests the 2.5's. Cause that's what he has on him.
@TheHellkapRides Жыл бұрын
@@Lost_Caws thans man! I dont think they make 2.75 in/out at all, only 2.5 or 3.0, and I cant get 3.0 offset/offset...think going with the 2.5 from Amazon, from all the videos I've seen that seems to be it, and by part number. But awesome! They will expand the inlets to 2.75 if needed. Cant wait. This is all the sound more I need. Just a bit more base for you face!
@Lost_Caws Жыл бұрын
@@TheHellkapRides Yeah man, I couldn't remember the size. It's been a while. I hope you like it more in person.
@chad765311 ай бұрын
Crazy 6years ago now I own the car
@Lost_Caws11 ай бұрын
I hope its treating you great like it treated me. Are the wheels still on it and the RGB headlights still active?
@CrazyGreek804 жыл бұрын
Sounds great love the deep hollow sound just need som6black dual tips.
@timbernicolehermani9541 Жыл бұрын
Two questions. Have you notice a loss in power from having chamber flowmasters on it? And does it throw a check engine light? My Cat is 100% stock exhaust but I have always had flows on everything Ive owned. Your car sounds amazing btw!!!
@Lost_Caws Жыл бұрын
No loss of power that I can feel. I never dyno'd the car. And no warning lights of any kind.
@marcosmartinez63806 жыл бұрын
I bet Chrysler spent so much money and time developing that sweet sound from factory for that hell cat!! Now it sounds louder NOT better but with Drone that you’re going to hate soon. Corsa its the way to go if you’re going to modify a car like that
@keithm71174 жыл бұрын
Sounds awesome man. What size Super 10’s are the inlet and outlets? I need 3 inch but looks like the offset ones are only 2.5 inch. Did they spread the ends wider. ? I don’t want my 2.75 inch exhaust down to 2.5 and then back to 2.75. What Flowmaster part number if you don’t mind me asking? Thanks
@tmansupra4 жыл бұрын
It is a 3 inch pipe, the offset are only 2.5 and they stretched it at the shop.
@tmansupra4 жыл бұрын
Part # 842518. Thanks for watching. Even with the most cheesiest music produced.
@keithm71174 жыл бұрын
Walkin Mad Awesome man thanks a lot I figured that was it. I love how they just got them to fit perfectly without welding any extra pipes in there nice clean job. Love the Challenger bro don’t worry about the cheesy music keep up the vids. 👍🏻
@keithm71174 жыл бұрын
Walkin Mad Just ordered 2 of them today. The place who did your job did an amazing job with the mufflers and the welds it looks like he didn’t even need an extra pipe to make it fit nice clean job. I wish I lived where you are to get the guy to do mine LOL
@AntonioClaudioMichael4 жыл бұрын
Nice work sounds epic
@claymahnen13074 жыл бұрын
I go this way with all exhausts whether trucks or cars. Throw a muffler on and/or delete some stuff. Way easier and less expensive for the same results as a $1500 cat back minus custom exhaust tips lol
@rubrub96363 жыл бұрын
How about drone inside cabin??
@tmansupra3 жыл бұрын
I really don't hear it as much as you would in 90's cars. Im guessing all the insulation from the cabin kills it. I can hold an easy conversation with someone inside and listen to music without having to turn anything down. But that wide open throttle still sounds great.
@rubrub96363 жыл бұрын
@@tmansupra I have 2016 RT challenger,and before I had straight pipe,and I couldn’t handle drone ,I was put back OEM exhaust and now I think to modify it
@Shocka2526 жыл бұрын
looks like Greensboro NC
@x6BATTLESTAR6x6 жыл бұрын
Is that the guy from impractical jokers?
@tmansupra6 жыл бұрын
kendrick galacgac Ha. I wish, they're making pretty good money.
@x6BATTLESTAR6x6 жыл бұрын
Walkin Mad lol
@gearhead40057 жыл бұрын
I woulda deleted the mid muffler and kept the resonators.. but sounds good either way
@gearhead40057 жыл бұрын
5,669,995 views cost less. Sounds better
@dcretikos6 жыл бұрын
What part number are your mufflers? I called flowmaster and they don't know what size pipe or configuration mufflers is needed for a hellcat. I have a charger.
@tmansupra6 жыл бұрын
Dimitri C part number# 842518. It's a 2.5 inlet and outlet but any muffler shop will expand it to fit. Hope you like it
@kevinsk51262 жыл бұрын
I think i found my sound...GOing to get the Flowmasters and swap them first...then will see about resonators, but this, sounds good. I can't stand 90% of "custom" exhaust sounds...i remember the 80's ...and today's sounds, are blahhh and boat-motor-y. This sounds clean.
@Lost_Caws2 жыл бұрын
I appreciate it, I hope it comes out right for you.
@autohelix7 жыл бұрын
Hell yeah I live right by Greensboro. NC. You ever take it to cars and coffee?
@tmansupra7 жыл бұрын
Ford ST mos def. I'll be going to the next cars and coffee in Greensboro. It's in March I believe.
@gegary1007 жыл бұрын
I thought about longtubes,no cats,super 10's,and leaving rear muffs on.....ANY THOUGHTS??????
@tmansupra7 жыл бұрын
gary gack I'm gonna stick with shorties instead of long tube. Don't want to lose back pressure from supercharger. And I wish I could run with no cats in my state. The no muffler thing, sounds good. Just remember the mufflers are in the center and the rears are resonators. I'm thinking of straight piping starting after the cats possibly this fall. Wanna try a different sound.
@Chris000884 жыл бұрын
Did you not like it with the resonators on ? I’m debating on if I should remove mine on my Challenger R/T with the Super 10’s
@tmansupra4 жыл бұрын
It just allows less restriction. And it gives it that sweet raspy low growl in idle.
@gruby_czarny_kocur4 жыл бұрын
What is the flowmaster part number????
@tmansupra4 жыл бұрын
842518. Be sure it is the offset/offset with 2.5 inch inlet/outlet.
@gruby_czarny_kocur4 жыл бұрын
@@tmansupra thank you very much! Just bought this from summitracing, hope it's the same. But i wonder why you don't recomended 3inch one? www.summitracing.com/parts/FLO-842518
@tmansupra4 жыл бұрын
@@gruby_czarny_kocur it's just what I had in mine. I wasnt sure at the time if the 3 inch would fit and I havent thought about it after. Hope it works out for you. My videos don't do the sound justice cause I received nothing but good comments in owrson ar car shows.
@gruby_czarny_kocur4 жыл бұрын
@@tmansupra I'm sure it will be great! I already have JBA Catless and active exhaust open but I need the perfect sound and your video is what I was looking for :) sorry for my English, I am from Poland and not using this language offten. By the way I follow you on insta gruby_czarny_kocur ;)
@gruby_czarny_kocur4 жыл бұрын
@@tmansupra after all, the factory diameter in hellcat pipe is 3 inches am I right? So why 2,5?
@markurbancowboy6 жыл бұрын
Sounds good man, but if you wanted it louder from the get go you could have saved yourself money by just doing the mid muffler delete. This is what most people do to get more sound from the stock exhaust.
@tmansupra6 жыл бұрын
markurbancowboy I've thought about it, but I just wanted the low rumble at idel and none of the raspy can sound. It came out to what I wanted for the time being.
@markurbancowboy6 жыл бұрын
Walkin Mad Yeah, the muffler delete can sound a bit raspy.
@joshtrevizo50946 жыл бұрын
Sounds awesome !! Don't listen to the hate, pretty good set up and makes the car sound real. Corsa and borla sound wwaayyy tooo fake in my opinion. But hey different strokes for different folks, am I right ? 😂
@tmansupra6 жыл бұрын
Thanks man, I've had these for a year now. I'm thinkin of black widow mufflers race venom model.
@joshtrevizo50946 жыл бұрын
Those sound pretty dope too! They have a huge following on IG and i follow em too!
@PawlDunken4 жыл бұрын
Are those 3 inch super 10s or 2.5 and if they 3 inch what's the part number?
@tmansupra4 жыл бұрын
I think the offset inlet and offset outlet only comes in 2.5 inch. Mine was a 2.5 inch and they stretched it to fit. Part number on mine was Part # 842518. Hope thus helps you out. Thanks for watching my most cheesiest video.
@PawlDunken4 жыл бұрын
@@tmansupra yeah I figured as much they don't sell it in the 3 inch I have a set on my car now 2.5 offset in center out. I going to upgrade my exhaust to 3 inch was just wondering lol and video not cheesy lol you was hyped I felt the same way with my car lol
@Ocrapsparanormal7 жыл бұрын
What's the part number on the super 10s? Sounds great, will be doing the same to mine but will keep the rear resonators for now.
@tmansupra7 жыл бұрын
I'll check in to that for you, glad to know you liked it well enough to get it. There is definitely a lot more "POP-POPS" (That's a Salomondrin phrase)
@Ocrapsparanormal7 жыл бұрын
Thanks. I see its a double offset but those a 2.5 inch inlet and outlets? Smaller than the factory 2.75-3inch piping.
@tmansupra7 жыл бұрын
He actually expanded the inlet ant outlet on the muffler in order to weld.
@jameszehme3677 жыл бұрын
Walkin Mad Are those 2.5 inlet and outlet on the mufflers do they sell 3 inch instead im going to get it on my 2015 hellcat challenger mine is a 6 speed what is yours
@tmansupra7 жыл бұрын
He had to open the inlets in them to fit the pipe. I couldn't remember if it was to fit in the 3 inch or 2.5 inch diameter. I didn't replace any piping except for the space removed from the resonators. So what ever stock size piping is what it is all around. Sorry if that didn't help.
@jameslawhorn1464 жыл бұрын
I did a resonator delete on my 15 and unless there different on that year then you've replaced your resonators with mufflers and cut the mufflers off
@tmansupra4 жыл бұрын
Well, regardless on which end it was replacing. I still deleted the resonators and replaced the mufflers. Take care. Thanks for watching.
@Kataklysmyk6 жыл бұрын
How much did all this cost? I've been thinking about doing something to my challenger.
@tmansupra6 жыл бұрын
Well under $150
@Kataklysmyk6 жыл бұрын
@@tmansupra Thanks for the reply. And sorry to bother with the questions, but is that 150 with parts and labor? Would love to hear your beast in person one day, I'm in Greensboro (:
@jay_volpe4 жыл бұрын
Stock exhaust manifolds?
@tmansupra4 жыл бұрын
Yes
@jay_volpe4 жыл бұрын
@@tmansupra long tubes with have that thing roaring
@mikereeves2826 жыл бұрын
@Walkin Mad since the inlet/outlet on the Super10s are slightly offset, did the guys at the shop have to do any adjustments or any work to get everything to fit?
@tmansupra6 жыл бұрын
I wish I could remember to tell you. Sorry man, I am however looking into upgrading to the black widow race venom or pro venom. Check back soon for an update.
@mikereeves2826 жыл бұрын
@@tmansupra Do you remember if your Super10s are the 3inch or 2.5inch inlet/oulet?
@tmansupra6 жыл бұрын
@@mikereeves282 3 inch, the hellcat piping is 2.75 so the mufflers can fit over the pipe.
@alfredoromoarzaga4580 Жыл бұрын
Sounds even sweeter with out resonators
@vibe_luk4zv3velez634 жыл бұрын
I would like to do that I have a Dodge Challenger 2019. what reference are the resonators
@tmansupra4 жыл бұрын
Part # 842518
@barneywarwick10386 жыл бұрын
can i put this muffler on my 1993 dodge Dakota it's got the 318 what is the best muffler for that motor to get the best air flow
@chrisbusch19706 жыл бұрын
sounds great with the resonators
@tmansupra6 жыл бұрын
Eh, well it accomplishes what i wanted at the time, thanks for clarifying though. Shit happens I guess. But come back cause I'll have a whole new set to replace it with coming soon.
@MichaelSmith-wx8bm6 жыл бұрын
Great job bro,sounds great.
@antoinewashington72234 жыл бұрын
What’s the drone like?
@tmansupra4 жыл бұрын
I dont notice much of anything from the exhaust drone. I hear my music just fine and I can understsnd a conversation to the passenger next to me perfectly clear.
@joshua.johnson4 жыл бұрын
sounds great! I would have cut the resonators, but that’s just me
@johnkircioglu21923 жыл бұрын
How much louder was it with resonators and super 10's than the original setup? Sounds amazing man, thank you!
@tmansupra3 жыл бұрын
It was a bit of the same, just a deeper tone, so removing them actually got louder.
@johnkircioglu21923 жыл бұрын
@@tmansupra Thanks for the reply!
@Ahahabih4166 жыл бұрын
Tbh, it sounded better stock. Mid muffler delete alone is like the best sounding
@robcortez9295 жыл бұрын
I think stock sounded better too
@baims83676 жыл бұрын
1st one w resonators sound better imo not as loud but still throaty and tuned !
@kingbrutusxxvi6 жыл бұрын
Gotta say... it doesn't sound that different in the post. In person it's probably got that nice, deeper rumble. Either way, if you like it then it's awesome. I went long-tube headers, cat-delete (ahem), and custom x-pipe to Borla ATAK on my "slightly"-modified Corvette. After all that (and a tune) I had spent over $3,000. Absolutely a ridiculous amount of money but, at nearly 800whp, my car finally sounds like it should so I get you completely. Cheers.
@reddirtsoldier906 жыл бұрын
My truck has same set up sounds like a beast!! 💪🏽😈
@ttjeepjl51466 жыл бұрын
That’s one nice car I am a new subscriber dig your video
@ToneyHandsome7 жыл бұрын
watched this video and just had same thing done to my 2017 challenger r/t. thank you!!
@tmansupra7 жыл бұрын
You're welcome, I'm pleased that you enjoyed the video, and I'm really glad to have helped in your mods. Hope you subscribe and keep up for I have many mods coming soon.
@Ragnarok19796 жыл бұрын
Sounds good, but not that much different from stock.. I put SLP LM1s on my scat pack and WOW did it make a difference