HER FIRST TIME DRIFTING!!

[@MIRACLECHEEZ]

Marco looks like a nfs character

[@xxmurdernova12]

lmao thats all i can see now

[@peckerthemecher]

metroboomin lmaoooooo

[@b15mark30]

dead

[@ianlusted5905]

tip for cleaning the vertex wheel, use some water and some dawn soap and use a soft headed toothbrush or something like that. i have the vertex 7 star and it gets real dirty with it in my daily and it having white stars, it comes out lookin new again!

[@ikilledZutera]

i never looked into it but i have been thinking of what the best cleaning the 7 star because my white stars are dirty af too. thanks!!

[@ianlusted5905]

nw dude!

[@lungelinecowboy]

Your knocking it out of the park with your videos man. Seems like your a lot happier lately and the vibe is really coming through into some positive content. Sitting here on the couch watching and literally getting the itch to go out to the garage to finish my front gas tank delete on one of my trucks.

[@Taylordrifts]

+Chris McGaughey life's been going well! Glad it shows! And do it man! The reward of finishing the project is so nice!

[@lewisadlington2390]

Taylor Ray your so cool man it's unreal

[@lungelinecowboy]

Taylor Ray diagnosed a fuel pressure problem I've been having. Even though I didn't fix it last night at least it's one step towards the end result. I've been having a bad habit of waiting for a full day only to work on my rides. Felt great just to get out there for a couple hours. Thanks for the motivation

[@supra8065]

She did better than tj hunt lol

[@mallorykennedy5917]

Facts

[@NotToClutch]

anyone could drift better than TJ tho

[@Abefd2]

supra8065 truee

[@connoisseuroftigolbitts]

supra8065 my grandma drifts better than tj

[@braydendaunt7070]

Greatest King you mean your blind grandma

[@alex_oneill_5277]

taylor what's up bro, big fan here from Ireland, keep up the great content!!!!!!

[@b210wah3]

Al O'Neill Yesssss, hon the Irish

[@michaelryan9070]

Al O'Neill need this man over to idc for a look

[@alancostello9233]

Lawd what part

[@iraman762]

ZzZLieutenantZzZ laois meself

[@AdrianCFWBMT]

Al O'Neill from meath boi

[@hoganmaughan3273]

Good tip for side molding removal: *Works best on an already hot, sunny day after leaving the vehicle out in the sun for some hours* 1.) Use heat gun to heat up molding and work in small sections. I don't use fishing line, honestly. 2.) Buy 3M rubber wheel and use it with drill to take off the adhesive left behind. (can be found online or at most PPG/automotive paint supply stores) 3.) Clean off rubber shavings and other dirt when finished removing adhesive. 4.) Use some Meguiar's "cleaner wax" and buff the mess out of it! Bingo. Like the molding never existed! lol. Unless, of course, you have a lot older vehicle where it's possible paint is faded underneath. I've removed a TON of truck side moldings in my days. lol :D

[@AtariBoy99]

Y'all need to be liking this mans videos more often cause there is no reason he should get 88k views and only 3k likes man come on man support the channel. He works hard as shit to make these videos great the least we could do is like and share man.

[@joshtupas5469]

Yes to Vertex wheel! I have a gold King of Vertex but really wish I got a red one. Looking good!

[@moofinz3822]

Taylor, if there's still double sided tape residue is still on it, high quality label adhesive remover will take that right off. let it soak for 5 minutes then scrub it off with a towel. Then wash off the door because that shit eats paint. Used to have that problem with trim thats been on cars for a long time

[@socalmx255]

WET SAND with 2000 grit, then hit with a heavy buffing compound then medium then polish

[@DirtJumperMogo]

marco's G will not stay clean for long, thats just my prediction lol

[@BertaleMedici]

McSteeze won't be long till he drops a 2j in it either haha

[@aymanbarakat186]

Bertsen doesn't it have a vq in it?

[@BertaleMedici]

Ayman Barakat Yes. Not sure if Marcos has a VQ35 or a VQ35hr both great engines. However it takes a lot of money and parts to make good reliable horsepower. (E.g. Stocker kit, cams, new fuel system, along with turbos and all other supporting mods) The g35 has the same cd009 transmission as the 350z as well. The CD009 is almost flawlessly comparable with a 2jz. With their connections to JDM Orlando getting a 2j would probably be cheaper than building the vq35. He will probably keep the vq for a while but eventual will go to a 2jz. Just speculation after watching Adam LZ and Taylor's Channel.

[@kingkillerjon]

It's the H-Rev VQ35 that Marco got, really good engines as long as you keep em maintained!!

[@HarryTwatter]

you can say the same about the Vette too, it'll look like that BMW in no time

[@evolutionzero2666]

The intro is back! Thanks for not getting rid of it. Your videos and quality are great! Keep it up!

[@BuildThreadsNorway]

Wow 200k subscribers already. Congratulations!

[@daniel200112dany]

Build Threads hi

[@BuildThreadsNorway]

hi there

[@dylanives8457]

I think the corvette needs an angle kit

[@Tom_Svensen]

We need more of Ashley

[@rainedrop14]

so since you dont have a hydro e-brake have you just been initiating the drifts by clutch kicking?

[@simplexeffect]

3M Eraser Wheel will remove the leftover residue. It's what I used for my C5 & it looked exactly how yours did after removing them. Just be gentle with pressure applied.

[@NotToClutch]

congrats on 200k

[@Carsbykiara]

Ashely is a beast with that car she did awesome

[@agoogleuser7784]

Hey man you should try hitting those trim spots with some 2000 grit wet sanding and then buff it out. Also a rotary buffer would work better cause it cuts the clear better. The general auto body rule of thumb is if you can easily feel the imperfection with your nail it's probably too deep in the clear to correct with sanding and buffing. Awesome video as usual!

[@barefootbob5252]

Favourite car guy youtuber by far! cheers for the great content man

[@MidgetMaster789]

Yo taylor. one thing I've found with some of my cars when taking of steering wheels is that chucking a key in the ignition to get rid of the steering lock helps

[@TylerF30]

That Joyner tho reppin Worcester Ma!! As always Taylor killing these vlogs!!!

[@xXNoah92]

Ashley is an angel :P

[@mcearl8073]

Ok dumb question but I keep wondering this. I'd have to imagine you go through tires like crazy, do drifters just get used tires or whatever you can find or buy new all the time?

[@ProjectWrx]

+Taylor Ray dude congratulations on getting 200 K subscribers! You deserve it man the editing on your videos have been getting so much better I can remember when I subscribed like 20 K and your and your editing on the Videos was not nearly as good as it is now so props to you for that and just wanted to say I'm glad that you turned around your attitude in the middle of the video after the trim gave you a hard time I honestly think the doors look better without the trim and those tiny lines and To me I'd rather take the trim off and deal with the line then have the trim so. the and your face at the end when you smash the trim on the roof was priceless. Anyway keep up the good editing and I will see you next video!

[@Taylordrifts]

+Colin Criez dude thank you for this! I've definitely tried to improve with every video and Its nice to hear that it's seen. Ahaha yeah didn't expect to hit the roof. Lmao

[@ProjectWrx]

+Taylor Ray no prob man! It's nice to see a KZbinr who actually reads and replies to comments! This is the seccond time in a month you've responded! That's awesome! If you want to throw me a follow on instagram that would be sweet! It's @project_wrx!

[@Bataleon2320]

Love you John & Ashley! Even though I don't personally know you two. Always enjoy seeing you two in Taylors videos!

[@Nerysgarcia22]

the lit intro is back!

[@darkwolf1618]

marco i love your g35 open diff drift

[@aymanbarakat186]

Everyone in these videos just seem so genuine, I really wish I had car friends like this where we just go out everyday and do cool stuff or just hang around cool cars. Eh I guess I'm just a little jealous but Not in a bad way. Love the videos keep doing you!

[@alpineweissm7501]

Does the e36 have the fusebox installed where the glovebox was? That's sick

[@alerezcn]

Idk if someone else has posted this but when I did car wraps at my old job we would use eraser wheels to remove the gunk left from the side molding or when removing badges you can google search air drill eraser and you can get some for really cheap definitely under 20+ and they fit on air drills and work really good and don't damage the paint hope this helps!

[@Abefd2]

Keep up the great content!! Your vids are dope AF!! 💯🤘🏽

[@GODLlKE]

First that wheel looks amazing, 2nd do you have any plans for painting the C5? cause if you are, might as well take them off and deal with the two small lines till you paint it. Looks a lot better with out them-just my 2cents

[@hillarygohennshieng2049]

Thats steering looks amazing! So sick!

[@lococubaa]

Taking the BSM's off my C5 took several hours. 3M adhesive remover is much better than Goo Gone. Also, soak the glue in the adhesive remover and let it sit for a little while before hitting it with the fishing line.

[@AndresGarcia-wj3dl]

you can use a rubber eraser wheel to get the adhesive off, but you've gotta be careful and it'll need a buff afterward

[@jman12163]

One of my favorite vids sick drifting

[@jippo9744]

Car is lookin nice man, sounds great too

[@izzycroptik]

you have bride seats in your​ Miata... which model are they? since rarely do any seats fit in Miatas I'm so afraid I'll order the wrong ones

[@fatboyh2094]

Who's the best Drifter you or Adam lz

[@theonlybucko]

Fatboy H20 Taylor

[@fatboyh2094]

I only said it because I think there both good just wanted to know what he thinks

[@nakian5316]

Taylor's been doing it longer

[@fatboyh2094]

True

[@Lexusflexus]

Fatboy H20 neither

[@bretthummel8525]

"say bye Marco" I love it every time!!

[@kiroshi6414]

Tell Marco the G 6mt sedans come with a vLSD so it allows for 30% lock when the fluid heats up in the diff - side note what's the setup up on the BMW sounds nuts 👌🏾

[@HiroshimaSpirit]

The dopest wheel. 👀 Congrats on 200k, Taylor!

[@jeffj4151]

Great job with teaching Ashley to drift!

[@timesareturning]

as far as your door goes, go find someone with a paint micrometer to mic up the clear thickness. if it's thick enough, hit it with some wet sanding. then cut with a rotary buffer, you won't get the necessary cut with a flex DA. It just isn't gonna be enough. then you can polish it up. Trust me my dude, that can be corrected more than was attempted.

[@SirZike]

timesareturning I highly recommend following this process. Should come out with little effort. Need to use the right buffer too, rotary all the way. Could go 1500, 2000, 2500 but might need to start with 1000.

[@BaggedMx5]

So Taylor r u suggesting 350mm or 330mm steering wheel for a miata? Im a tall guy aswell 1,91 cm(6,2") and im looking for a new steering wheel..

[@_Old_Guy_]

that was sick !! more donuts with frosting and sprinkles

[@steevensonmoise4957]

Am I the only one that was amazed by the angles on the BM.

[@gfrom2537]

steevenson widmaer thing got really sideways maybe angle mods

[@bmxinme]

What motor is in the E36? Sounds so good!

[@elijahtinsley4825]

between the time i started this videos and to the end, over 100 thumbs up. Keep up the good vids

[@La_Chevy_grdto_5.3]

use the heat gun to warm up the sticky stuff & use ur fingers to rub it off & then use turtle compound to clean it up I did dat on my 2003 Chevy Tahoe it took me 2 to 3 hours to do cus my side molding were bigger

[@aboveaverageautos4447]

America, Germany and Japan all doing donuts together

[@kingemp]

Man thanks for all the work you put in for the videos all ways the high point of my days keep up the work

[@Xxsharpshooter58Xx]

gonna be the cleanest drift vette out here

[@DUDERZ_]

what kind of tires do you run on your corvette?

[@matari7407]

What camera do you use to record your videos? Videos look good

[@ThePicko94]

Leave th strips off buff it out and wrap it eventually man, matte olive or something man! Strips look grandpa spec but absolutely loving the Vette build man! It's my favourite car you have had, I think you should put most of your time and effort into this build man, and never get rid of it!

[@SethDavis96]

Keep up the great work Taylor !!! also when are you coming out with your tool video ?

[@afifpatel1413]

Marco is the friend everyone needs 🙌🏻

[@EdBoy_HD]

its normal, since the car is a few years old sun fades paint and since the molding covered that spot it has that mark. I've had that happen on a few cars i've taken the molding off of.

[@johncroft853]

guitar string works really well. I use it on the daily doing body work at the shop I work for.

[@timwilliams2302]

supposed to use a sawing motion when taking the adhesive for the trim off

[@joe_kaiser2136]

I've done this exact thing to my mustang and I was thinking to comment to use a heat gun I figured since you uploaded it already, still watching so idk if you've buffed it already but if not don't worry mine did the same exact thing and it buffed out

[@lluistupedtraiagen3686]

those the bmw have a 6.0??? if so can you collaborate on the mods done to it ? I'm building a s13 6.0 and need motivation that bimmer sounds sick btw!

[@lilplaya4200]

digging the steering wheel

[@Cheese_is_pain]

What happened to Marco Polo's G? Was it dented behind the driver side wheel on the fender before he bought it?

[@gfrom2537]

thats bimmers angle was amazing any angle mods?

[@MyraHodgkiss]

The guys are KoruWorks are so nice!

[@andreimitroi]

Your face is priceless at 20:31 :))) Nice videos, Taylor! Keep it up!

[@MrEp1kk]

What happened to poor marco's G's fender? it's all jacked up?

[@fabianalborcervantes]

I can't wait to see what happens with the Corvette.

[@patrickparks8276]

Next time you need to take the adhesive off use like 50 pound test line, it doesn't break taking adhesive off, and it only like $3.50 at Walmart for like 100 yards of it

[@malibuac21]

when I took off the molding in my truck I used 100 pound test line Goo Gone and a eraser wheel. then buff it out

[@lawnchair2280]

Are you going to FD Long Beach or Irwindale when it comes around? It'd be sick to see you there.

[@THESKINIMIN1234]

Lawn Chair seeing as how he lives in Florida, I doubt it

[@cadehinds4598]

What's a Boost? no he does

[@TwoCarGaragez]

What happen to Marco's fender

[@wheatienotgreedy5207]

how did the pizza rolls turn out?

[@DemonFilmsCrew]

15:43 ive also used that technic to remove the steering boss

[@TylerMonagan]

sweet video dude

[@FatlaceFreddy]

Dope ass video !! Congrats on the vertex wheel... idk makes me want to get a vett.

[@NotBillHenato]

what happened to marco's fender?

[@mendyWZRD]

Try wetsanding with 2000 grit then 2500 then 3000 if necessary. Then buff it out with the rotary or a DA polisher.

[@straightthugnoluv]

Marco's fender crunched?

[@TriniRogue]

On the wrap thought is that cheaper than getting someone to plasti dip your car?

[@elpichito3]

HAHAHAHAH!!! I like Marco he's all about doing things spontaneously. "ima admire it in here"

[@vonfranklin1839]

Hey how's it going I got a question about a car I am trying to get into drifting and I found a 93 j30 on the cheep it has a v6 and was wondering if it would be a ok starter car I appreciate any info you can give me. I am new to your channel and love all the awesome videos.. thanks Von aka (Tennessee )

[@leon12348085]

First Taylor keep doing what ur doing

[@Unbranded2k20]

I had the same problem with my side moldings! not on a corvette tho haha

[@DemonFilmsCrew]

get two quick release adaptors so you can interchange a steering wheel for daily and drifting, just a thought. great video as always

[@glb5053]

This video was cool, man. Nice job. Next time you try the fishing line trick buy some of that braided spider wire fishing line. It's way stronger than the monofilament stuff. It works good using the sawing action too.

[@jaydamafia8998]

@Taylor Ray that steering wheel is too dope

[@elitarvid3103]

does taylor have a welded diff or is it the stock limited slip diff

[@ShredGarage]

All C5s are limited slip.

[@stevenseagl5630]

JeremyShred not if its welded

[@dailydrivers4451]

danielmn stock lsd

[@stevenseagl5630]

Daily Drivers i Know just saying it wouldnt be LSD if its welded :)

[@Tristan_Moore_16]

Use a caramel wheel to remove the double sided tape, its what we use in our panel shop 👍

[@Alex_Bernabe]

Anyone have info on ksport coilovers? I've heard they come out of the same factory as BC Racing so quality should be similar. Anything helps thanks

[@adrianabella2999]

Taylor ray has the best intro

[@zscott7186]

you need to water sand then buff that spot where the molding was id use 1500 grit then 2000 then buff

[@jamiieos]

That e46 is a beast

[@bladedush]

so noob question, is it actually better to have the steering wheel that close?

[@graniteroots]

thats some pretty epic donuts!!!!

[@jesuspadilla158]

sweet chiz keep up the good work Taylor