Here's the correct way to Change Brake Pads & Rotors in a car

How To Replace Brake Pads And Rotors
`````````````````````````````````````````````````````````
In this video i show you
1. How to Tell If Brake Pads are Worn
2. How To Tell If Brake Rotors are bad and Need Replacing
3. How to Change Brake Pads
4. How to Change Brake Rotors
5. How to remove a stuck brake rotor
6. How to lubricate the caliper guide pins ( slider pins )
7. What is the best lubricant to use in brakes
8. How to use a torque wrench to torque down the wheels
9. Why silicon based synthetic brake lubricants are better than petroleum based copper anti seize grease
10. I also shows Toyota lithium soap base glycol grease for the guide pins
Front and rear brake pad replacement is a very easy job and you can easily do it yourself at home. Not only am i gonna explain how to change brake pads and rotors, but also the correct way to lubricate with the best brake lubricant as recommended by most manufactures.
So whether your car is a Toyota, Honda, Nissan, Mitsubishi, Subaru, Ford, Chevy, Chrysler, BMW, Mercedes Benz, Audi, Volkswagen, Porsche, Volvo or whatever you have, This is the basic fundamental knowledge you have to arm yourself with.
High quality low brake dust Ceramic brake pads amzn.to/3Q9boIU
Ceramic Brake lubricant amzn.to/3QqFjh1
Brake rotors amzn.to/404BGki
Brake service kit amzn.to/2DWIw4K
Brake piston compressor tool amzn.to/2NotSD7
Universal rear disc brake piston retractor tool amzn.to/3SgxUlI
Rear disc brake piston retractor tool kit amzn.to/471OjPa
Breaker bar amzn.to/3FsSUhJ
Basic socket set amzn.to/3MdfKxI
Basic wrench set amzn.to/3Q9SHoJ
Basic socket and wrench set starter kit amzn.to/3tFgUeN
Flex head ratchets for reaching tight places amzn.to/45L5i7k
Torque Wrench amzn.to/3s0MTpg
How to STOP BRAKE SQUEAKING in your car (No Squeaks Guaranteed)
• How to STOP BRAKE SQUE...
Junky DIY Guy's official merch, Thank you very much for supporting the channel
/ junkydiyguy
And don't forget to follow me on Instagram for more updates
/ junkydiyguy

[@JunkyDIYguy]

Guys, check out my latest video kzbin.info/www/bejne/i3iYZauqapuokNE

[@ElectricAddiction]

This video made my day, and makes me believe in humanity again.

[@josephs9268]

As a technician who jist likes watching car videos, this is a great how to video for people who wanna learn the correct procedures. Awesome video man!

[@driver_cl]

This video is , for lack of a better word, perfect.

[@JunkyDIYguy]

perfect comment mate,,

[@chrismchale4280]

except that it gives torque value, which some might assume are universal, when in fact they are different for every car.

[@jim2611]

The best video on brakes I've seen - even mentions the correct slider pin Toyota rubber grease with part number - I spent ages trying to find it and Toyota spares couldn't help!

[@ronh582]

How much energy this guys has is infectious great job with the break down.

[@bushcraftbeats4556]

Coming back to say that I've been watching a lot of brakes videos, in particular Honda Crv, but this video is by far and away the best video I've found. The production quality, the pacing of information delivery, the cleanliness of the information... they are all excellent. If you are just starting out with this channel, I wholeheartedly recommend keeping it up, and keeping it at this level of production quality. I think preeminence, or something close, is within your reach. Thanks for sharing your knowledge!

[@JunkyDIYguy]

Thank you for the kind words

[@freespirit8041]

I agree 👍

[@terencehudson6333]

Must be one of the best and most informative video's on "how to do your brakes" that there is and I have seen quite a lot in my time. Well done.

[@victor-jm7ck]

This video is so helpful, it goes into every detail. You must have put a lot of time and effort into this.

[@kkjafarhi3174]

Top comment! I felt the same way about this video.

[@dcpc08161992]

Bravo, great video. Quite frankly, your video provided better visual demonstration and step by step explanation of 99% of the brake job videos that I have seen. Great job!

[@erikh7974]

best brake video i've ever seen!

[@byronakhavi953]

This video covers everything to OEM requirements. By far the most comprehensive and complete review of the proper methodology to follow changing brakes. I am a Chemical Engineer and work at an OEM assembly facility. I could not find a single fault in this video. The author summarized the proper method detailed in virtually every OEM service manual. Covered everything down to proper lubricants and torque specs. The road test was even included. I would add bleeding brakes for old cars to ensure the fluid is clean. But that is not required since he noted to break the bleeder screw(that should be done correctly to avoid air entering then system). Excellent job mate!!

[@sssoaring2]

The effort you put into your videos is amazing and golden. please keep it up. Also thanks for showing the difference between different brake greases.

[@chronousnemesis]

Damn, I don't even know that grease should be applied on the new brake pads! Really opened my eyes, thanks!

[@thegunsnmoses]

Did a few brake jobs but learned something new today to improve upon! Will change out from using copper anti-seize. Thanks!

[@darthvirgin7157]

i recommend opening the bleed valve WHILE pressing the brake piston. this expels some crud that may have collected at this part of the fluid line. then add new fluid into the reservoir. this was a recommendation from my brake specialist teacher.

[@mattharrison9550]

Totally agreed. Don't know why everyone misses this important step. To many cowboys on KZbin now. This guy not bad though!

[@thetexaschainsaw9366]

Best brake video ive seen. All the other brake changing videos the guys just say dont let the brake reservoir overfill but they dont tell u what to do when it overfills

[@laypyu]

This has to be among the greatest channels on KZbin. Fantastic content.

[@TheAlic11]

Top notch. I like your style. If you can't explain it in a simple way, you don't know it well enough. Bro keep up these amazing videos.

[@Merlin_DMagician]

I all most never comment on people videos. But your videos are very good and easy to follow. Thank you. 👍🏻

[@OggyGTA]

Your videos are brilliant - this is yet another extremely high quality effort. Well done!

[@starabagraxD]

This guy is underrated. Beautiful video

[@keviiiboo7460]

Very in depth. You do a good job explaining things.

[@catherinebazuin5782]

I'm I visual learner. Thank you for doing this video so I can picture what my mechanic is talking about. Maybe now I can even do this myself!

[@alkelly3236]

I have seen a lot of info videos on here, this one is the best I've ever seen thank you

[@JulioSoto1685]

This guys is great! I'm about to binge on all his videos!

[@princejamil87]

Great video love how u explain it all so well! Learning lots!

[@Qarabyah5k]

Man this video needs a couple million VIEWS

[@blacknessiah13]

Best brake job video i've seen! Thanks

[@Electrogrow540]

Really like the way you made this video. Very informative. Thanks!

[@JorgeJimenez2020]

Very good quality video for content and images! Well done, thank you!

[@sgtrpalma]

Outstanding video. I appreciate your work and dedication

[@mountainconstructions]

Best Brake Tutorial I've ever seen Some fantastic tips too You've obviously worked in a Brake Shop before...

[@Georgia-Red-Mud]

personally i just enjoy reading the closed caption provided for the videos..great job sir

[@rajeshbehra5556]

Outstanding videography and content. One of the best on KZbin.

[@craignedoff991]

Great program, one of the best 👌

[@freespirit8041]

That's really good how you explain everything 👍😁Thank you so much

[@adammadhouse]

Oh man perfect... Every DIY should watch this video

[@Barnekkid]

I just discovered this channel and the vids are quite good.

[@dustinjones9882]

Awesome video, great quality

[@lights80088]

Great video, perfectly explained. Thank you.

[@fideauone3416]

Once again, excellent.

[@ramt25]

Great video!! Thanks

[@PavlosMilos]

Brilliant video!

[@zenden6564]

Excellent presentation - thanks.

[@adamaalassaneba4195]

great video my man Thank you

[@sscbkr48]

Excellent video work. Thankyou! Very clear. Doesn't get any better than that. 😁

[@MrPromerican]

Well put together...thank you

[@komruz]

Great video - keep at it !

[@sreekumarUSA]

Thank you for the information.

[@flipmode00]

this guy is amazing love your video

[@harryburford6629]

well done mate very good

[@jimbola77]

thank you, friend and God Bless!!!!

[@bamhm182]

Great video!

[@Broncs78]

Thx for the help!

[@TheGalaxycluster]

Best ever video man...many thanks. Can you get steering wheel shake with a sticking caliper because of bad guide pins or hose ?

[@EppingForest304]

Very informative 👍

[@gener8joy]

How did this video received 7 unlikes??? Really??? Oh yes! The answer is envy. Great video btw. Thanks a lot man. Keep doing this great job ;)

[@Phoenix-kp8yq]

thanks bro, so nice video

[@basje1]

nice quality vids, subbed

[@boots7859]

Been a while since I did my own brakes, however just did my '06 Murano. Watched several different video's, and of course say this one after I was done. Very nice, no obnoxious music, referenced toque spec's and proper lubes per Manf., wait, what!!! No one else seems to do that, just torque it down until if feels right, and then a bit more.... Just a couple of possible points if I might. I used anti-sieze on every bolt (wheel, caliper, and bracket). In addition to lubing those caliper pins, you may need to check inside the bracket holes to make sure there isn't more contaminated/old grease. I was advised not to put any lube on the back of the brake pad, but did put some Sil-Glydeon the pad ends that slide on the brake pad hardware. I'll know shortly if I listened to the wrong person. Keep of the great work.

[@pansolo]

IMMACULATE VIDEO

[@wade6972]

Bro how don’t you have millions of subs your content is super helpful this channel is super under rated more people need you LOL

[@isakbonaventura2825]

Very well done! Thank you! :-)

[@AlejandroNemo]

great video

[@JulioOrtiz-ub3yo]

Great 👍🏼

[@ishara04]

best explain

[@geethmensdis3758]

Nise vidiyo i lik thanx

[@rkpalmer69]

Very informative and detailed. Keep the vids coming. (Are you from Perth?)

[@TheCollinsballin]

It’s important to clean the blind holes as well!

[@ericalbert6954]

Merci !

[@captainstress]

Great video! Where can I find that manufacturer lubricant list shown at 5:56?

[@bobdelaplage690]

Great my friend, thx a lot, you are great, the tempo of filming and talking is slightly too fast, what needed rewinding.good tips , realise that what is obvious for you, can be new for a diyer😅, so slow down the pace and show the details relaxed. That would be even more perfect, great the absence of music, love from Belgium

[@zephyteh2628]

Subscribed

[@JS-lb6gp]

Hi Is the brake caliper grease good for the pins?

[@pw5192]

like all the other comments i cant fault this tutorial , just perfect .✌🏻👍🏼

[@gopalgab]

Tools aren't mentioned in the description. Specifically looking for that silicon brake grease. Great video.

[@JunkyDIYguy]

Should be good now,,

[@gopalgab]

Junky DIY guy yup! Perfect. Thanks.

[@jackathowarth]

How do you measure how tight the bolts should be?

[@Infiniti25]

I saw a mechnic shine a torch at an angle onto the rotor/disc and spun it to see any warping

[@spooksvstheworld6731]

29 bloody dislikes....?! This Is by far the best video on here

[@rondail5675]

What are your feelings on Burning-in, burnishing, breaking-in new pads. The 5-10 quick stops from 60mph to 10? I am going to be replacing pads on my Vette. I am concerned with glazing the pads and causing a squeal. FYI: your videos are great! Content, instructions, materials, and talking speed. Keep them coming please.

[@JunkyDIYguy]

When you break in the new pads, do few gentle slow downs without locking the wheels or having abs kicked in, So won't glaze the pads or make a squeal.

[@jhovadroc]

You are fucking awesome. Your videos are so damm well on point and Detailed. (So VERY IMPORTANT)😊👍👍❤

[@TheHamouda]

very helpfull.thank you .but i think 203 NM TORQUE FOR THE WHEEL IS TO MUCH I THINK ITS 120NM

[@bushcraftbeats4556]

Thanks for these videos, appreciate it! What did you use to clean the caliber piston, at 8:26? Thanks again!

[@JunkyDIYguy]

it was just a microfiber towel and some water.

[@bushcraftbeats4556]

Cool, thanks!

[@Jayeeyee]

I shouldn't need to say this for obvious reasons but some people on here isn't the brightest pickle in the jar. Whatever torque spec you saw is for the vehicle in the video, please follow your FSM specs for your own car.

[@CostasAthan]

Shouldn't measuring the run out of the new rotors during installation be a standard step?

[@mickhoward3954]

Fuck mate, you are THE MAN! Bloody legend!

[@abudyel9888]

You have a perfect Hand Job 👈👌👍

[@bluefin66]

1st Vid: Looks like WA 2nd Vid: Yep :)

[@davouchi1]

Eh bruda where ya been?

[@user-rw1jh2sq3y]

上課簽到

[@onogrirwin]

2:59 won't work :P There will be a lip on the rotor that you will be measuring instead. Use a micrometer if you really want.

[@JunkyDIYguy]

Brake rotor calipers have pointy tips on the jaws so the jaws not touching any lips.

[@onogrirwin]

Well I learned something then :P Never seen one like that.

[@Tecalitlan1943]

2:12 FROM 6 MM TO 4MM NOT 3MM LOL

[@pistakegarage2703]

Are you a physicist?

[@davidt.5883]

Too many steps - just gonna pay my mechanic. :(