Hidden Toyota Tacoma Diagnostic Screens REVEALED!

[@Tacomaholic]

Check out more Tacoma quick tip videos here: kzbin.info/aero/PL-IN_9dyC2sAFTRrLwsMuh5-uXPuGY2rG

[@protacodan3800]

Yes this works with the 3rd gen as well same menus as 2nd gen. Thanks for the tip. Protacodan

[@BeechSportBill]

Thanks! My 2007 Prius had LOTS of hidden menus

[@asphaltxtremegameplayisaac2831]

Good to know. Thanks! Learned something new today.

[@KamauBeno]

Works for my 2014. Thanks!!

[@Ok-fb7zy]

I saw ur comment on Real Madrid v Paris Saint

[@HeyHeyItsJayTay]

So my 2nd gen doesn't have this same type of entune system, so I doubt it will work for mine, but maybe some variations. Good video though!

[@55jplock]

It works also on the 3rd Gen first two buttons under tuning knob

[@TractorsNStuff]

Just wish I could turn on ambient air temp in my truck. I get the HD weather, which tells me the temp at the nearest weather station. Not exactly useful.

[@grampa_ahah]

Thanks. Unfortunately the previous owner of my truck replaced the radio with A Kenwood. 😂😂

[@Tacomaholic]

Haha that's probably better than the factory Toyota head unit.

[@scorpio_357]

You can also press and hold the power button until the unit restarts to exit the menus.

[@FishermanATX]

This is awesome man! Never knew about it either. Great info! Thanks for sharing ☺️

[@shawncarter5619]

What company made your RAM mount over your head unit? I've been looking for one for the Gen 2 for a good long while

[@Tacomaholic]

That's the 2TPAM from Expedition Essentials. Here's my install video: kzbin.info/www/bejne/hn-keIyfrLtlpZY

[@shouldibehere]

Works on my 3rd gen Tacoma

[@Tacomaholic]

Nice!

[@yojuanjose1]

Looking for the knobs where did you get them?

[@karlschofield2324]

What headunit are you running and will it work with a 2009 taco?

[@Tacomaholic]

I'm just running the factory head unit.

[@blessedveteran]

This does work for 3rd generation.

[@Tacomaholic]

Nice!

[@RyanLiauw]

I have a 2014, and it sometimes freezes and reboots; any of you all face this issue and know how did you fix it. Thank you.

[@danielconley5256]

Yes, I have a 2014 as well with same issue. I’ve heard mention that it’s a software update needed from the stealership. Mine often, on a 1 hour trip, will reboot 3-4 times

[@tinah.6532]

Mine too!

[@TheK2TheC479]

Hello, I am curious do you know how to turn on the "auto lock" function? To be specific most vehicles lock the doors after about 10mph. Mine is off and it drives me nuts I don't live in the best neighborhood and would like it to lock automatically.

[@Tacomaholic]

Not sure on that one. Have you called a dealership about it?

[@TransitAndTeslas]

On the home screen go to the “gear” icon. If you have this head unit go to Apps then settings. Then go to vehicle settings and then on that list you can choose auto lock by speed or auto lock shift from P. You can also choose the beep volume when you unlock the doors, or disable the beep completely. You also can change other things on this screen like headlight sensitivity and auto headlight off etc.

[@chrispendel6455]

How did u get the trd logo when u turned the screen on

[@Tacomaholic]

That's my very first vid! kzbin.info/www/bejne/goTPkJuKjMmLrqs

[@jamesmartin4850]

Works on the 2020 tundra pro

[@Tacomaholic]

Nice!

[@greg3837]

Have you given any thought to installing the AUcar Tesla screen?

[@Tacomaholic]

Is it made in China?

[@harryl7946]

Nice to know but what if ........ I don’t have no stinking Entune system! 😟 Second Gen (2013) but just a touch screen factory 🏭 system. No Sirius either! 😢

[@Tacomaholic]

Hmm worth a shot to see if it will still work.

[@masonolono4881]

It works on 3rd gen

[@christopherchambers9314]

Is that a stock bezel for the head unit? Not talking about any of the nice add-ons but the plastic bezel that holds the head unit.

[@Tacomaholic]

Yep it's the stock one. I did paint the part surrounding it in flat black though.

[@robertmacdonald2735]

Thanks

[@TheHyena-ru8bz]

I hate this bluetooth screen it always freezes and I have to restart it by holding down the volume

[@mikelawry1934]

How do you get the maintenance required light to reset or stop blinking on a 2011 Toyota Tacoma ?

[@Tacomaholic]

Here's how to do it on a 2014 so hopefully the process is the same: kzbin.info/www/bejne/sJrXqaGpgdN2j7M

[@mikelawry1934]

Sorry to bother you again ...I've already tried that and that does not work ...when when I turn the truck on the maintenance required light blinks 6to7 then it goes off and stays off ...what does this mean

[@chefwax4833]

Hold in mileage/tripmeter button while turning ignition key on/ off 3 times

[@scorpio_357]

It flashes to tell you the maintenance is due in approximately 500 miles. If it isn't reset in that time frame, the light will say on solid until it is reset. To reset...Cycle trip meter to odometer reading. Ignition off, press and hold trip reset while turning ignition to on(engine off).

[@Tacomaholic]

@@mikelawry1934 When it flashes like that then goes away by itself I think it means an oil change interval is coming up.

[@kkixxstixx]

good info to know

[@mikerugar5440]

Nice, but can you go threw and tell me what I am reading? And how to work the tests?

[@cordellhall66]

How do you have it show up with trd and in red?

[@Tacomaholic]

That's actually the first video I ever made: kzbin.info/www/bejne/goTPkJuKjMmLrqs

[@rocketman214]

Maybe just a coincidence but my phone stopped connecting after my daughter connected her iPhone 12 to the entune. Only way to get Bluetooth on truck working again was the application diagnostic menu. Phone connects again now and daughter is banned from using my truck.

[@scorpio_357]

iPhones and Toyotas seem to have problems. Don't know what it is about them.

[@Nickthecarguy]

Mine don't have apps button

[@shawncarter5619]

Where did you get the ram mounts above and below your head unit? I have been searching for some that fit the gen 2

[@Tacomaholic]

The panels that the ram stuff is mounted to?

[@shawncarter5619]

Yes, the panels...

[@Tacomaholic]

@@shawncarter5619 The top one is the 2TPAM and the bottom is the Techdeck. Here are links for those vids: amzn.to/37l4ESS and kzbin.info/www/bejne/hn-keIyfrLtlpZY

[@rickking823]

Hey bud I have 3rd gen Tacoma SR5 and I tried it and it works I believe the head unit is the same as in the second gen I wonder what other hidden things that Toyota has that we don't know about

[@Tacomaholic]

Awesome glad to hear it

[@Mr.SeymourButts]

I'm the master of quickies

[@ronnaldcrouse7565]

My display sometimes does not come on ? What can be wrong? I first thought possibly a fuse but then it started working the next time I turned the ignition on it happened alot

[@Tacomaholic]

You might just need a system update.

[@RLTraverse]

anybody know if theres an android head unit and software i can use to access this info? last owner of my 2012 was a bit of a slob and the screen is getting a bit janky

[@Atalbot1994]

whats the mount near your ac knobs?

[@Tacomaholic]

That's the TechDeck covered in this vid: kzbin.info/www/bejne/r4S9gqKXZ9Wsmdk

[@tammystrickland4669]

Can you set up Google maps?

[@Tacomaholic]

I doubt it with the factory headunit.

[@guambomb671]

🤙

[@julianpenton1675]

Whoa, I thought we agreed that you'd give me a shout out when you asked if you could use this in your video :P I am disappointed

[@Tacomaholic]

Lol I couldn't remember where I had heard the info about the hidden screens.

[@kkixxstixx]

first?

[@ajsboxer]

How did you get " TRD " to display at boot up?

[@Tacomaholic]

I go over that in my first vid: kzbin.info/www/bejne/goTPkJuKjMmLrqs

[@ajsboxer]

Thanks!!!