Epson 1400 Continuous Ink System Install CISS

[@kristenhunter3709]

Thank you so much for posting this video! I am in the process of purchasing a CIS and saw this model on Amazon but was concerned about it because of some of the reviews. Your video makes the process way less daunting and now I'm confident I can handle this process. I too am using this printer until it dies. :)

[@HillBrosTech]

I just uploaded another video that will prolong the life of your ciss system, it really is a 'must do' and only takes less than a minute. Here's the video: kzbin.info/www/bejne/nqHFZpSseMSiapY

[@johnzarollin2749]

the only challenge I had with my ep 2200 large format printer was keeping the multi-ink hose free of hangups as the cartridge block ruins back and forth. Dangled the center with rubber band to keep it clear. Small inconvenience but saved SOOOO much money on ink. Make sure the reservoir is level and maybe use velcro to affix it to not get knocked over. Ink spilled onto drywall in normal house construction will STAIN through every layer of paint. You'd have to use a SEALER on the drywall to end this ghosting appearance of the stain. Weird. Ink for the Epson 2200 is compatible IN HP 6700 cartridges also. Saved $$$ using it in both. Be sure to clean the factory sponges below - about 7 of them

[@Odolwa2]

wf-7610 in my case, i have a ciss, but red keeps dropping. it isn't a pigment clog, it literally just drops out mid-print. i'll do a head cleaning (after a quick manual prime), it will print a few times normally, but then drop out. only a dozen head cleanings is able to get the flow going again (by which i've wasted other colors just to make red appear). no red page-purge sheet ever works, ever ever. 100 in a row, zilch. only head cleanings did it. do you suppose the print head is to blame or the CISS? perhaps the heating element is going out? or should i take a chance and only replace the CISS? (it was an ebay one for $25 at the time, now about $38 for the same type). i'm looking more at the inkxpro ciss as a replacement.

[@gilberth7719]

Good video, I have been using Cobra Ink CIS systems on Epson printers for over 8 years. Multiple WorkForce printers and my Artisan 1400. The key to good inkjet maintenance is to use them. If you are not printing photographs at least once every couple of weeks run a print head cleaning at least every couple of weeks. Getting the print heads working again after they get clogged because of non-use can be difficult. On a $100 printer, it may just be a throwaway but for an Epson 1400, that is not something you want to do.

[@madelinzaycheck1874]

Super helpful video as the written instructions with this left a bit to be desired. I used this with my Epson Photo 2200

[@lewashcliffe]

Do you know if this is available for the Epson WorkForce WF-3820? I haven't been able to find it anywhere, including Amazon. Thanks!

[@allenjohnson2532]

Hello. Just installed this system and your video helped tons. No problem with ink, sensors, etc. The scary thing is the hose system flopping around - not well engineered/thought out. This printer (1430) appears to be a challenge for retrofitting CIS, given all the moving parts. Could you update on what exactly you did with the tape? How it's anchored, etc. Does it quiet the flopping? The scary part is what contortions occur under the housing as the carriage reaches the far end of its run. Do you have any other mod suggestions, re 1400 vs 1430? Thanks for any answers and help. Good video! Peace, Allen

[@HillBrosTech]

Here's a HUGE mod suggestion, I just uploaded another video that will prolong the life of your ciss system, it really is a 'must do' and only takes less than a minute. Here's the video: kzbin.info/www/bejne/nqHFZpSseMSiapY

[@khaledalkhder9110]

Hi, which printer has the best resolution and it can print more? Epson 1390,1430,L1800 or 1400? Thank you

[@rocksonofosu6639]

please when my Epson 1400 printer prints light magenta colour doesn't show in the picture printed. I have tries the nozzle print u realise that light magenta doesn't show on the sheet. Any assistant

[@violaesdaille]

hi, i recently purchased this printer but i think that it sat in their garage for awhile. Can i take this kit out to clean the printheads? I tried but it felt like i was going to break the cartridges...

[@davidbrown8303]

It doesn't matter if you break the cover because it cancels out your warranty installing a Ciss. But it is worth the gamble to save a small fortune on ink.

[@Patriotman54]

i HAVE A 14 00 the light on the power button just keeps blinking. please help

[@lowbetslot132]

how to reset CISS Cartridges of eospn1400?

[@Pulsejxse]

Hello I did everything you said but my ink light stays on it’s not blinking and I get a printer error can u help me please thank you

[@Pulsejxse]

I kept doing it over until I got it

[@james42519]

why did you do it in the middle instead of the side? the way it is now it seems like the tubes will kink and get caught. i think you are supposed to route the tubes from the right side really.

[@amberwilliams4231]

Question, why did you take the door off, it was not in the way was it?

[@canadianpremierjuniorhocke4270]

yes, it is in the way of the CISS tubing.

[@HillBrosTech]

I just uploaded another video that will prolong the life of your ciss system, it really is a 'must do' and only takes less than a minute. Here's the video: kzbin.info/www/bejne/nqHFZpSseMSiapY

[@Username-fi2un]

Does anyone know if you can fit a waste ink tank into this printer?😫 I have found plenty suitable waste ink tanks for similar eco tank printers however I was unable to find a waste ink tank that said it was specifically suited for the ET 1400

[@kenward9332]

Hi I just install it nice but don'rt work keep sayin not epspn cartage not recognized. I keep trying buyt all lights are on and will not work says install epson anly

[@taylorterrailw]

you just saved me. thank you so much

[@Roubeirt]

Does anyone has a new link to buy the ciss ink? :(

[@RB-pl5pg]

Can The CISS be used on the New Printer right off the bat or do I have to use the original ink cartridges that came with the printer first to initialize the printer?

[@canadianpremierjuniorhocke4270]

I'm just setting up my system now, it didn't even come with the original ink cartridges. So I guess yes, you can use the CISS cartridges right off the bat.

[@HillBrosTech]

I just uploaded another video that will prolong the life of your ciss system, it really is a 'must do' and only takes less than a minute. Here's the video: kzbin.info/www/bejne/nqHFZpSseMSiapY

[@Tshaynyb1]

that's a dye sublimate ink right

[@ganphotography2368]

does any one have an example of a print with this setup?

[@yessicagutierrez769]

When will ot be available again!?

[@gilberth7719]

Amazon does not seem to carry Cobra Ink products anymore. I have always purchased directly from Cobra Ink. Their service is exceptional. If you text them with a problem they will get back to you within one business day. (they are closed on the weekends)

[@tdawg719]

It would make more sense to just have the cartridges that you can fill with a syringe full of ink. Because the cartridge is still going to tell you it’s out of ink and require you to reset it anyways. If you use the syringe method you won’t have to take the door off, deal with that ridiculous ribbon tubes and those ink tanks

[@guadalupeallyouneedtoknow7929]

Can You remove it to clean it... I tried cleaning the heads but still clog.

[@HillBrosTech]

Did you get this sorted?

[@yakabudtv]

is it possible to buy a CIS for epson 1400 in Amazon and deliver here in the philippines?

[@TheGamingIndian]

i am very sure CISS is available in the Philippines. Go to your local market NOT a showroom and you will find one.

[@HillBrosTech]

I just uploaded another video that will prolong the life of your ciss system, it really is a 'must do' and only takes less than a minute. Here's the video: kzbin.info/www/bejne/nqHFZpSseMSiapY

[@schoolcompound]

Please, Can you get it for me ?

[@barakados]

you should print something, to see if it works

[@vianduterte5636]

ķķķk

[@Kana18gurl]

Hello I have a problem actually.. I have all my cartridges full except the yellow. Ink is flowing to the head, but yet no yellow coming out. I removed the cartridge and eventually saw the yellow cartridge empty. What to do and wha is the problem please?? If you could help me out with this. Thank you

[@HillBrosTech]

Did you get this sorted out? Also, I just uploaded another video that will prolong the life of your ciss system, it really is a 'must do' and only takes less than a minute. Here's the video: kzbin.info/www/bejne/nqHFZpSseMSiapY