Hitch-N-Go Carts, fantastic beach cart. and fishing cart.

[@chrisbedford4019]

We bought one of these a month ago. I was looking to build something similar and came across this. Works great so far. Two beach trips so far and no problems. Highly recommended!

[@rbromfield2112]

Great to hear!

[@jbravo70]

Is there a lot of wobble? That is one thing they don’t say or show. I got one and the play and wobble is a WHOLE LOT.

[@chrisbedford4019]

@@jbravo70 there is some looseness that allows it to move a little more than I would like. On the trip to the beach I usually use a couple of ratchet straps from each side to the safety chain hooks on the hitch. Solid as a rock while on the highway. Once we get to the beach we don't use the straps and just let it move around as it likes. Slower speeds so it's not an issue. No problems so far. The wife has taken it a few times and she loves it.

[@VanityBitty]

I’d love to have one of these! I’d use it for my e-trike and then when it’s down, my trike can pull it like a trailer. I can use it when camping to go fill up water jugs all at once, and a million things. Unfortunately, my van has barn doors, not a lift gate, and I dont think they would clear the thingy that pokes up that the wench sets down into. I’d seriously consider one if it could!

[@지니야-g3q]

Can you ship to Korea? Please buy a URL

[@rogergoffii3901]

would you just sell the hitch setup?

[@rbromfield2112]

*****Update****** The New and Improved Hitch-N-Go Cart is now available through Great Day inc. greatdayinc.com/products/truck-auto-jeep-accessories/hitch-n-go-cart/

[@zhenzhenyouyu2776]

Good idea! Haha, we are the ones who work hard on KZbin! I subscribed to your channel!

[@robinalford3755]

"the great big tires" , could you please tell me the width and where to find, widest tire I have found is 5 inches but the ones in video appear to be 7 to 8.

[@rbromfield2112]

The tires in that video were front tires off of a lawn tractor 13X6.5, I bought them through Tractor Supply. But since then I've got 12X7 Beach balloon tires and they're the best in the sand. You can get them on Amazon marketed as kayak cart tires or we will have them available on a Beach / Fishing addition of the HNGC-350 called the High Sands Beach Buddy, it'll be out in July.

[@TimHoSD]

It's a harbor freight carrier with wheels?

[@dwightstewart7181]

Pretty much. It wouldn't be that hard to build one. The lift on the hitch is an adjustable ball mount arm with a winch bolted on top. Too bad the guy apparently didn't actually make it into production. It was a good idea that likely would have had moderate sales.

[@jbravo70]

Is it supposed to wobble a LOT??? Got one and the wobble left & right & up & down is crazy. I’m worried that because it can wobble so much and it’s made of a softer aluminum metal that it can crack and cause an accident. I haven’t tried taking it on along trip but worry that the wobble will be so great that we will be able to hear and feel it.

[@rbromfield2112]

Of all the HNGC-350s sold and used by customers no one has as of yet had any problem caused by the play in the unit. Some play is necessary to allow it to raise and lower but no one has ever stated that they felt that it was excessive. No one has stated that while driving they can feel or hear it moving while raised into the transport position and secured using the supplied trailer hitch pins. If you have any problem with your HNGC-350 contact the manufacturer Great Day Inc. to have your issues resolved, they are committed to great customer service.

[@victorpatino690]

How did you attach the wheels to the carrier

[@rbromfield2112]

At that time I was building the Cart basket and had wheel kits built specially for my carts that you could put the larger wheels on. I now have Great Day Inc. building it all. You can buy the whole set up or any of the pieces you need through several retailers that sell the HNGC-350 Hitch-N-Go Cart.

[@chucksmith5002]

Nice cart . Made that Chevrolet squat

[@lillysweetle]

Love it! So smart

[@jessemurillo8223]

Do you sell just the hitch?

[@rbromfield2112]

Yes, when you look up the HNGC-350 you'll also see a universal hitch assembly available to mount on any cart that you already own.

[@Maldonados_detailing]

Is this available to buy now?

[@timsanders2005]

Is this available for purchase now. 12/17

[@josephjaypee6731]

Where can I buy one of this.

[@LABABC]

Were can I get one

[@muksinoat1859]

opick subhanallah

[@jocecere]

www.electricbeachwagons.com we have them also.

[@brentjackson1674]

The link provided does not work. Are you still manufacturing and have you began shipping these carts?

[@rolandmoreno3526]

And takes a lot of space

[@mistahjay_racing2751]

Wouldn’t a ramp be easier

[@rbromfield2112]

Ramps don't increase the storage capacity of your vehicle they decrease it. The HNGC-350 gives you the extra storage of a cargo carrier plus the ability to lift / lower while full and no reloading or unloading, just roll it away.

[@seanmcmaster]

What wagon is that?? Not talking about the hitch jack but the actual wagon

[@rbromfield2112]

I build the wagon. It's a 48" X 24" aluminum cart with a wheel kit I have built to my specs. designed to take a 3" hub. wheel

[@seanmcmaster]

Nice!! The closest I could get to something like that was a gorilla cart for $114. Only wish it was long enough to fit the ez up without having to take off the back gate, the sides just aren't as sturdy without it on oh and I'll be replacing the wheels with ones like your's. gorillacarts.com/product/gor1001-com/

[@rbromfield2112]

I wish you well on your project, I've been working on mine for years. Your hurdle in replacing the wheels that came on the cart with the wider ones will be the length of the axles on your standard wheel kit. On earlier attempts I've shortened the hubs on rims that will work with the wide tires by cutting them off, then replacing the bearings, another solution I used in early carts was to weld extensions on the axles. Another method I used was to split the wheels and build a spacer to put put between the two pieces of the original wheel to make it wider so that you can put the wide tires on it. I also experimented with using a duly wheel tire set up like the trailer on a semi. Cutting the hubs worked the worst, I went away from these methods because they're labor intensive, and the end results are much better than what you have now, but not perfect, not good enough for resale. In the end I designed a wheel kit that met my specifications and had them built, this works perfectly, but is expensive. I'm in the process now of taking one of my hobbies, (making the perfect beach cart) and turning it into a business.

[@mrguppy1016]

Is it just me or the truck dropped like one foot with all the weight? 😜👍🏻🌈🌈🌈

[@dwightstewart7181]

Yep, that's either a mighty heavy cart or a weak suspension.

[@dadthegreat3076]

Can't take a guy serious wearing crocs. 😁

[@JW-hf1oc]

He is in 4wd though

[@barntt]

Better hang a RED flag behind that cart to be D.O.T. LEGAL! It's right at the limit. IMHO!

[@rbromfield2112]

It only extends out 30 inches, 6 inches inside the legal limit. The HNGC-350 and the High Sands Beach Buddy which is the beach / fishing version have been in production for over 4 years now, sell pretty well and we've never had an issue reported for being extended too far out behind the vehicle..

[@barntt]

@@rbromfield2112 Didn't know the measurements so was just throwing it out there. Nice product

[@cookie19292]

Fn 👍 nice

[@angelagonzalez2428]

I want to see the circus when they hit the freeway and EVERYTHING starts to fly away!