Love the Fusion! I have it in my Cliffhanger Element build. Great step by step setup instructions 👌 thx!💚👍🤙
@BigSungHobbies2 жыл бұрын
Thanks. It should work great in Element build.
@madsrcbuggy2 жыл бұрын
That was a really good and comprehensive guide! I got the Fusion 1800 in my Gatekeeper, it's nice and simple to install, and I learned the setup is easy as well. There was a few things I didn't know already, so I'm happy I watched this video.
@BigSungHobbies2 жыл бұрын
Glad to hear that the video helped! Much appreciate checking out the video.
@blakesanfilippo35912 жыл бұрын
I have this in my sendero HD and will probably put it in my Gspeed build. awesome content as always. love the information.
@BigSungHobbies2 жыл бұрын
That sounds like a good plan.
@SandJ-Adventures2 жыл бұрын
A very useful video! I'm considering a change to the Hobbywing Fusion, so this was very informative.👍
@BigSungHobbies2 жыл бұрын
Great to hear! They work really well on TRX4.
@rcpayne64162 жыл бұрын
Very detailed, good job man, you're killing it!!!!
@BigSungHobbies2 жыл бұрын
Thank you!
@miniaturkapalrc65177 ай бұрын
hello. I want to ask. I use this fusion. Why is it that when I use a Lippo 2s 25C battery, when I turn it on and run it for a few seconds it immediately dies.
@mhouslay72812 жыл бұрын
Super clear and so helpful. Thanks very much indeed 😊
@BigSungHobbies2 жыл бұрын
You're very welcome!
@islandrc-duke19722 жыл бұрын
nice motor and esc upgrade,nice install
@BigSungHobbies2 жыл бұрын
Thanks 👍
@fernsolo2 жыл бұрын
As soon as I need a new motor is either the hobbywing or the spektrum which if I'm not mistaken they are both hobbywing. 👍
@BigSungHobbies2 жыл бұрын
They are both the same. Spektrum offers 2300kv version, but it doesn’t come with the programming card which you have to buy separately. Personally I think you will be happy with 1800kv version.
@thomasvanderpool47352 жыл бұрын
I have really been liking my spectrum 2 in 1 2300kv. It's made by hobbywing so it's a fusion rebranded for spectrum. Got the spectrum because of the higher kv option.
@lsnaithe2 жыл бұрын
Have to pay extra for program card with spectrum which sucks
@BigSungHobbies2 жыл бұрын
Thanks for the info.
@BigSungHobbies2 жыл бұрын
I like Hobbywing as they include the program card.
@thomasvanderpool47352 жыл бұрын
@@lsnaithe ya that does suck! But i felt it was worth the little extra for the higher kv option. Now I have a program card and if I get any more then I am all set. If hobbywing had the same kv option in there fusions then I would have gone with them. I heard hobbywing was releasing more kv options soon.
@BigSungHobbies2 жыл бұрын
It would be great to see more kv options from Hobbywing.
@audizombie58652 жыл бұрын
Hello, wondering if you could show how you added those connectors for the lights. I need to do the same but I don’t want to mess anything up, thank you!
@BigSungHobbies2 жыл бұрын
I used the instruction and the following video from Traxxas to mount the lights. Pretty straightforward if you pick up the light kit.
@doncarrow96602 жыл бұрын
Great video thank you for sharing
@BigSungHobbies2 жыл бұрын
Thank you 🙏
@superdutyscaler68236 ай бұрын
I bought two of these off Amazon, and neither of them had the programming card?
@BigSungHobbies6 ай бұрын
I don't believe they sell this version any longer. The new SE version which is 1800kv does not come with the programming card. Reach out to Hobbywing customer service and see what they say.
@SevenWelt2 жыл бұрын
nice👍
@BigSungHobbies2 жыл бұрын
Thank you! Cheers!
@ka41722 жыл бұрын
Does the Fusion need any service to make it constantly waterproof?
@BigSungHobbies2 жыл бұрын
I don't believe so, but that's probably a good question to ask Hobbywing customer service.
@lifethroughalens2000 Жыл бұрын
Did they discontinue the other 1200kv the 1800kv versions?
@BigSungHobbies Жыл бұрын
They have discontinued the Fusion 1200kv. The 1800kv version is being sold SE version (a bit simplified version, but a much lower cost). And they have added the 2300kv version sold as Fusion Pro
@murrhardterrccrawler-mp3gz Жыл бұрын
❤😊
@BigSungHobbies Жыл бұрын
Thanks!
@fredo74822 жыл бұрын
Dood I'm using the 11 tooth gear on the motor with the 45 tooth transmission gear, but it fits loose I already stripped one 45 tooth gear even when I tighten the transmission case to hold the motor in place wth is wrong, its breaking my head
@BigSungHobbies2 жыл бұрын
I am assuming you are putting it on Traxxas TRX4. Check that you installed the motor onto holes "C" on the motor mount plate? That's all I can think of. Mine did not have any issues.
@fredo74822 жыл бұрын
I fixed it bro had the 9t gear instead of the 11t. I'm a rookie 😆 but thanks for the explanation of configuring the motor settings.
@BigSungHobbies2 жыл бұрын
@FredoDawg91 Glad to hear that you got it sorted out. It always seem to be the small things that cause big issues.
@ADHDNME77710 ай бұрын
How do i run my servo off of it?
@BigSungHobbies10 ай бұрын
Servo does not run off ESC. Servo needs to be connected to Ch. 1 of the receiver. The Fusion will be connected to Ch. 2 of the receiver. Good luck.