Tractor Rescue: Part 2: Homeward Bound

Welcome back to the garage! In today's episode, Dustin and I get the Massey Ferguson Loaded up and ready to take back home. Part 3 coming soon!

[@graveloverlord]

Hey Dustin again... Thanks again for the welcome everyone. Hopefully you continue to enjoy the journey of this tractor as we try to uncover its mysteries and learn as we go successes and failures and all.

[@tomfillmore9710]

Good video guys enjoyed watching thanks nice old tractor

[@HODGEPODGEDODGEGARAGE]

Thanks for the view and kind comment Tom 🙂👍 Much appreciated. Take care and be safe out there 🔧🔩

[@thecollectoronthecorner7061]

The trailer with the winch is a handy outfit.

[@HODGEPODGEDODGEGARAGE]

Oh, you ain't kiddin' Randy! :) That winch pulled the tractor up almost too easy lol. Take care and thanks for stopping by :)

[@CRRpop]

Looking forward to seeing that old girl move under her own power.

[@HODGEPODGEDODGEGARAGE]

Thanks! 😁 Hoping to try and get it running soon. Take care

[@MotorCityMetalArt]

Getting ready to go through this myself just bought a 1964 Ford 4000HD. Pick it up this weekend !

[@HODGEPODGEDODGEGARAGE]

Oh, hey! That's pretty cool! 😁👍 Thanks for swinging by my friend and good luck on your project tractor 🔧

[@kevinlamarr1424]

That’s a good find! Even better when two buddies help each other.

[@HODGEPODGEDODGEGARAGE]

Thanks Kevin! 😁👍 I hope you're doing well my friend. Long time no talk. Life treating you ok?

[@SumterWrecker]

Mr Zane I liked " In theory it should hold". Thanks for sharing and stay safe

[@HODGEPODGEDODGEGARAGE]

LOL :) I'm glad you got a good laugh Hal. I appreciate you stopping by my friend. You fellas stay safe in the heat. It's been over 100 degrees here already 😣

[@markpospichal571]

Good to see the Ferguson coming along, hope there are no major engine issues. Anxious for the next installment.

[@HODGEPODGEDODGEGARAGE]

Thanks for the kind words Mark! I appreciate you stopping by to see the progress. We're hoping to have it running next weekend. Take care :)

[@davem5370]

Happy to be a 6 percenter! Looking forward to the tractor firing up and going to work.

[@HODGEPODGEDODGEGARAGE]

Thanks for that Dave! :) I greatly appreciate you stopping by my friend. We're hoping to have it running next weekend. Take care

[@eddiepatterson5025]

I’m glad Dustin found the solution to the transmission problem. I’d like to see the breakdown of the Chevette rally car. Have a Blessed One Sir.

[@graveloverlord]

If Zane wants to in the future we can maybe make a short video of the little chevette.

[@HODGEPODGEDODGEGARAGE]

Thanks for the view Eddie! :) Dustin's Chevette is a neat rally car. We can probably make a video about it as well :)

[@brianmaynard7320]

Good to see the follow-up of the tractor!! Can't wait to see it running!! Take care my friend!! Peace and love!!

[@HODGEPODGEDODGEGARAGE]

Hopefully it'll be running next weekend Brian! :) Thanks for stopping by. Peace and love your way. Be safe in this heat

[@brianmaynard7320]

@@HODGEPODGEDODGEGARAGE you too, buddy.

[@gonehometoacadia3139]

I just discovered your video channel and so far I've watched parts 1 & 2 of this series, and really enjoyed it. I would like to compliment you on a several things. First, good subject matter. Second, good interaction between yourself and Dustin without overdoing it with forced or excessive banter. Third, both had an air of competence about you that showed through despite your inexperience with tractors. All in all, I really enjoyed these videos enough that I'll be going over to your channel to see what else you have.

[@HODGEPODGEDODGEGARAGE]

Both Dustin and I *greatly* appreciate this kind comment my friend! 😁👍 Neither of us are experts on tractors. The main objective was to show how everyday people can still pick up, lean about and fix a project with just some basic knowledge. It truly means a lot that this comment and countless others are from people who understand. Made my day to see this. We do talk a bit more in "Part 4" but we tried to keep it as simple as possible. Dustin is a great guy and I'm glad to hear people like this series. Take care and stay safe out there. 🔧🔩 -Zane

[@chrispaleen5137]

good luck on the start up hope all goes well. don't always get to watch your videos all the way through, but I always come back to finish them. your content reminds me of my younger days working on trucks and tractors with my brother and other friends. keep up the good work and stay safe looking forward to the next video.

[@HODGEPODGEDODGEGARAGE]

Thanks for the kind words Chris! :) it really means a lot my friend. I'm glad you enjoy the videos and they can bring back good memories. Stay safe and I'll catch you in the next one

[@jannbailey3738]

My dad's 35 had the same problem. The tool of choice, large srewdriver.

[@HODGEPODGEDODGEGARAGE]

Thanks for the view and comment Jann! 😁👍 Both are much appreciated. Yeah, we've been told this is a common problem. Luckily the fix isn't something time consuming. Take care 🔧🔩

[@graveloverlord]

Yep that's what did the trick for me too.

[@TF856]

If I remember correctly a lot of old Massey Ferguson had a problem of the shifting forks getting discombobulated if somebody was lifting up or pulling up on the gear shift lever when they're shifting gears. A Massey Ferguson repair shop showed us how to fix that. Pretty much the same way you did.

[@HODGEPODGEDODGEGARAGE]

Yeah, I heard later on that this was a pretty common problem. Luckily the kind viewers gave Dustin and I suggestions. It's freed up now and shifting like it should. Cold weather has prevented any progress but hopefully in the next video or two it will be running 🙂👍 Thanks for stopping by Kerry. Take care 🔧🔩

[@ontheroadagain4773]

I have a 35 from 1961 I bought 32 years ago. I live in Finland so it's a British tractor with a 3-cyl. Perkins diesel, but I think the rest of the technology is pretty much the same. The 4-cyl engine is a "Standard" engine. Btw, you can tell a 4-cyl apart from a 3-cyl without even looking closer at the engine: The 4-cyl has the exhaust on the right side and the 3-cyl has it on the left side. There should be 8 US Gallons (30 litres) of transmission oil in the "transmission housing". The gear box and the differential is the same unit. If it's empty there most likely is a leak. It would be a good idea to, at first check if the attachment bolts for the tappets located under the rear axle housings are leaking. These bolts are tapered and fastened with nuts on the inside of the housings. It's pretty easy to unscrew the housings if you take off the wheels first. (I had this problem on my 35). You should also change the transmission filter before you refill the housing with new oil. This filter is often forgotten and I bet this one looks bad too. You reach the filter by removing the PTO lever cap on the left side. But DON'T take the lever off the cap!! There are small parts that can drop into the transmission. The air filter is an oil-bath filter. There is no filter to replace. Just clean the can and the steel wool filter with diesel and fill the can with fresh motor oil, the same oil you use in the engine. English isn't my first language so I don't know if all terms are correct but I wish you can understand.

[@HODGEPODGEDODGEGARAGE]

Minun piti kääntää Internetissä, joten toivottavasti tämä toimii. Arvostan mukavaa kommenttia. Olen hämmästynyt siitä, kuinka paljon näitä traktoreita on muissa maissa. Hienoa, että voit vielä ostaa niihin osia. Ystäväni kuuli vaihteistosuodattimesta, mutta olen kiitollinen neuvoistasi. Toivomme, että saamme traktorin pian käyntiin. Kiitos, että pysähdyit ystävän luona.

[@hubertrobinson8825]

I'll be waiting for the next part haven't seen one like that running since 1975

[@HODGEPODGEDODGEGARAGE]

Thanks for tuning in Hubert! I greatly appreciate that my friend. Dustin and I are hoping to get it running next weekend. Take care and hopefully I'll see you next time. :)

[@currencia527]

I bought a MF35 industrial tractor at auction and dragged it home, along with a loader to attach to it. It is a cute little machine. Ferguson and Ford did a lot of stuff together on machinery. I look forward to your purposing of it.

[@HODGEPODGEDODGEGARAGE]

Oh nice! It's neat to hear you have one similar. I hope you can get yours running without too much headache. Thanks for stopping by 😁👍

[@johncook3817]

The mf 135 is just the same! I find the best thing to do is to not change gear in a rush but always have a long screw driver with you at all times!! It also does it in forward gears as well!!!

[@HODGEPODGEDODGEGARAGE]

Hey! 😃 Thanks for the view and kind comment John! Oh yeah, there have been quite a few people say you should always carry a long screw driver just in case lol. Take care and be safe 🙂👍

[@TeamTopKick]

I hope to see the tractor running and moving on it own power. Be a fun project to restore.

[@HODGEPODGEDODGEGARAGE]

Hey! :) Thanks for stopping by and for leaving a kind comment. Hope all is well with you and your truck. Take care

[@DependableAutoTruck]

my grandfather had one he kept a screw driver in tool box to unlock gears on his TO30

[@HODGEPODGEDODGEGARAGE]

I've hear that from a few people now :) It's bad when you have the problem soo often you need to carry a tool to fix it. Such a poor design. Thanks for stopping by my friend :)

[@kylebass4635]

Looking forward to seeing part 3 when the tractor runs. Don't worry I always watch to the end while eating dinner or enjoying some Copenhagen long cut mint!!!

[@HODGEPODGEDODGEGARAGE]

Thanks for that Kyle! :) I truly appreciate that my friend. Sorry it took a bit to reply. Been busy at work. Take care and be safe if you're out in the heat!

[@glennhunter7018]

Good video again my friend you know I Watch the whole video keep the good video coming I could watch a hour anytime my friend good good job getting The tractor loaded be safe

[@HODGEPODGEDODGEGARAGE]

Thanks as always Glenn! :) I know you're one of the people in the 6%. How's your dad doing?

[@glennhunter7018]

@@HODGEPODGEDODGEGARAGE he is doing Real good my friend

[@HODGEPODGEDODGEGARAGE]

@@glennhunter7018 I'm glad to hear that Glenn! 😁

[@glennhunter7018]

@@HODGEPODGEDODGEGARAGE Thank you be safe in the hot weather

[@RustRehab]

Great video, I like the duet between you and Dustin. Looking forward to seeing it run!

[@HODGEPODGEDODGEGARAGE]

Thanks Bennett! 😁 I'm glad you enjoyed the video my friend. Hopefully things are going smooth for you. Thanks for stopping by my friend. Happy wrenching

[@pstreetgarage7304]

That was a great video. Glad Im part of the 6 % lol. Learn something new every day. Now. I wouldnt mind seeing that Chevette again 😆

[@HODGEPODGEDODGEGARAGE]

I think we're planning on a Chevette video next time too :) We'll see. Thanks for stopping by Stephan!

[@augustzepeczauer]

So glad to see another upload buddy, I like the rally car. Love watching your videos and I can't wait to see the next one. Take care and stay safe friends.

[@HODGEPODGEDODGEGARAGE]

Thanks for the kind words August! :) That means a lot my friend. Glad you enjoy the content. Hopefully I'll see you in the next one

[@brianherron5400]

Great video 👍, Zane have a great day and week.

[@HODGEPODGEDODGEGARAGE]

You too Brian! :) Thanks for stopping by my friend. Hopefully all is well with you. Sorry it took soo long to reply. I've been swamped at work. Take care and be safe :)

[@darrenhawken9766]

Great vid , very popular little tractor over here in the UK 👍

[@HODGEPODGEDODGEGARAGE]

Thanks for the kind comment Darren :) Yeah, It's neat to see how there are quite a few in the UK. Luckily there are still parts for them being made. Take care and be safe

[@davidcatlette9697]

Will always watch from beginning too end ! Zane you have great and too the point videos !😄

[@HODGEPODGEDODGEGARAGE]

Thanks for the kind words David! 😁 It really means a lot my friend. Take care and be safe

[@nathanhawkins4108]

Look like you had a good time out keep up the good work

[@HODGEPODGEDODGEGARAGE]

Thanks Nathan! I appreciate the view and kind comment as always. Sorry it took a bit to reply, I've been swamped at work. Take care and be safe :)

[@ydocproductions5593]

Looks like you guys were having a lot of fun out there! Who would’ve thought that a huge screwdriver is all it would take to unlock a transmission that’s been in a field for decades LOL🤣! Another great vid Zane😀👍

[@HODGEPODGEDODGEGARAGE]

Yeah, we had fun. :) Luckily it wasn't *miserable* hot yet when this was filmed. It was however TICK central. Had them crawling everywhere, even though I used the repellant. Not fun lol. Thanks for the kind words Cody :)

[@stacenhartland9777]

Good to see ya Zane! Put that ol travall on and people will watch for an hour! Hope alls well! Thxs

[@HODGEPODGEDODGEGARAGE]

Hoping to have the Travelall running soon. Been ordering parts like crazy for it. Thanks for stopping by Stacen! I hope all is well for you. Take care and be safe out there in this crazy world :)

[@andyadelmann3158]

Keep it up Zane , 🇺🇸

[@HODGEPODGEDODGEGARAGE]

Thanks for the kind words Andy! :) I greatly appreciate that my friend. Take care

[@oasisranch1231]

The gearshift is hung between gears unscrew the plug next to the gearshift and take a long flat screwdriver probably one already in that toolbox on the finder then manipulate the gears until the main gearshift comes free and don't get in a big hurry shifting gears from know on as you will learn eventually good luck

[@HODGEPODGEDODGEGARAGE]

Thanks for the view and kind comment. 🙂👍 Luckily that same remedy was suggested and the transmission is now freed up. Seems like this was a common problem. I appreciate you stopping by and take care 🔧🔩

[@dans_Learning_Curve]

6% here Great video! Hope it fires up!

[@HODGEPODGEDODGEGARAGE]

Thanks as always for the kind words Dan! :) We're hoping to have it running next weekend. Sorry it took soo long to respond. Been super busy at work and exhausted in this heat. Take care my friend :)

[@dans_Learning_Curve]

@@HODGEPODGEDODGEGARAGE 😀

[@rusty6666]

How ever long the video may be i have to see it till the end. its always good to see what happens and i,m grateful for the time that you take to edit them as well and there great so keep up the good work Zane .... Thanks

[@HODGEPODGEDODGEGARAGE]

Viewers like you are the reason I get inspired to keep at these projects. I truly appreciate the kind words my friend :) That really means more than you could imagine! Send me an email sometime if you get the chance. It's [e-mail]

[@eirik_halvorsen]

Hey, again! I'm one of the 6% ... yay!!

[@HODGEPODGEDODGEGARAGE]

Thanks for that Eirik! :) It means a lot my friend. We're hoping to have it running next weekend. Take care

[@maxnorthouse3992]

It does not matter how long your video's are i always watch them to the end. Welcome to the channel Dustin. Nice tractor.

[@HODGEPODGEDODGEGARAGE]

Thanks for the kind words Max! :) Did I send you stickers? I cant remember

[@maxnorthouse3992]

@@HODGEPODGEDODGEGARAGE Yes you did. You are to young to be forgetting stuff. lol. I will have the golf cart done in a few days and will send you pictures.

[@HODGEPODGEDODGEGARAGE]

@@maxnorthouse3992 I was thinking so, but I would forget my name if it wasn't on my work uniforms! 🤣 Sounds great my friend. Can't wait 😁🔧🔩

[@christopherkermode478]

Excellent

[@HODGEPODGEDODGEGARAGE]

Thanks for the view and kind words Christopher! 🙂👍 Take care and be safe 🔧

[@eirik_halvorsen]

Hey!! Dustin has indeed got my favourite car behind there! The Merkur XR4Ti =originally Ford Sierra in Europe 😍

[@graveloverlord]

Yep she's something I picked up and drove daily for a while. She still drives. I just haven't used it as much. I'll be working on it again soon and drive it again. It's not what I would call fast but it's a nice driver.

[@eirik_halvorsen]

@@graveloverlord Awesome! I, and probably me only, wouldn't mind see it closer on an later occasion. Lookong forward to the next tractor video anyway 😀

[@CrustyRustysRestoration]

I love an old tractor! Super cool man! Keep the vids coming!

[@HODGEPODGEDODGEGARAGE]

Hey!! :) Thanks for the kind comment Alex. Sorry it took a while to respond, been incredibly busy. Hope things are going well for you. Happy wrenching :)

[@CrustyRustysRestoration]

@@HODGEPODGEDODGEGARAGE hey no worries brother! Got home from a trip on Monday morning an snagged a bad cold, sorry for no video this week

[@HODGEPODGEDODGEGARAGE]

@@CrustyRustysRestoration Ouch! No need to feel sorry! I hope you feel better soon! 🙂

[@CrustyRustysRestoration]

@@HODGEPODGEDODGEGARAGE thanks man! That’s the goal!

[@TractorSwede]

Its the 23c engine with the cold climate cylinder head that has 4 glow plugs in it. Make sure that the glow plugs work when you try to start it and it will start much easier

[@HODGEPODGEDODGEGARAGE]

Thanks for the view and kind comment 🙂👍 I appreciate that my friend

[@johnlabone7786]

If the engine turns over just keep pulling around the farm will pump oil through the engine

[@HODGEPODGEDODGEGARAGE]

That's true John 🙂👍 Thanks for stopping by and for leaving a helpful comment. Take care 🔧🔩

[@mikenone9903]

Nice video. I vote for more of Dustin and/or Zane+Dustin.

[@HODGEPODGEDODGEGARAGE]

Thanks for the kind words Mike! :) It's greatly appreciated my friend. Hoping to make more videos with Dustin soon!

[@billjunking_fool5549]

Hopefully you get it running in my opinion is definitely worth putting a little time into and hopefully not too much money involved

[@HODGEPODGEDODGEGARAGE]

Hopefully it will be running this next weekend Bill :) Thanks for stopping by my friend

[@fordmuscleluis9710]

I can't wait to see part 3 soon bro

[@HODGEPODGEDODGEGARAGE]

Thanks Luis! :) Glad you enjoyed the video. Take care and be safe

[@garyfeltus9801]

Zane just fond. Your channel thought it was good channel. So I subscribed. I like Dustin he seems like perty cool dude. I watch hr long videos if there good . So you fit in that category. Hope to see this tractor up and running soon lol.

[@HODGEPODGEDODGEGARAGE]

Thanks for the kind words Gary! 🙂👍 I greatly appreciate the view as well. We're hoping to have he tractor running this weekend. Take care

[@WitchTrials92]

Hey Zane Been here since I stumbled upon your crew cab S10 video and been subscribed ever since I love seeing the International's

[@HODGEPODGEDODGEGARAGE]

Thanks for the continued support Nichollas! :) It really means a lot my friend. Sorry it took a bit to reply. I've been super busy with work. I hope things are going well for you :)

[@WitchTrials92]

@@HODGEPODGEDODGEGARAGE I can understand that can't wait to see you get back on Project Atlas

[@HODGEPODGEDODGEGARAGE]

@@WitchTrials92 Me too! 😁 I've got some changes planned that I think people are really gunna like.. *cough-12v cummins-caugh* 🤭

[@machinist5828]

Hey, I always watch your videos all the way to the end. How else do I know how it ends? No worries! Cool Chevette. Not exactly the car I would have guessed for a rally car. Watching you guys unload that reminded me of a past experience. A friend of mine had a Vega drag car. 454, blower, 4 speed and a narrowed rear axle. Looking at it from the rear the slicks just about covered up the axle tubes. The last pass of the night brought a horrible sound of gears that were not happy. He won the pass anyway but I had to tow him back to the pits. We managed to drive it on the trailer despite the skipping crunchy sound of unhappy gears. We either busted the trans or the rear, soon the deed would be found as we usually just rolled it off the trailer. 4 something in the morning we get set to unload. We put it in neutral and shoved. Nothing. Wouldn't budge. Great, that meant it was a busted rear end. We get my truck and try to tug it off. Nope. We borrowed a friend's tractor. It just drug trailer and truck. The friend had forks on his tractor so we managed to get under the rear axle and lift. Nope. Now the cat was out of the bag! Both of us being tired and disgusted had thought each of the other had unhooked the chain on the front. Nope. All we could do is sit in the grass and laugh. The rear axle was fine. The 4 speed not so fine. It broke the case and split the bell housing. I hadn't thought of that in years. LOL! Cheers Terry

[@graveloverlord]

Thanks i like the car. Not the US version of the chevette. But the Vauxhall chevettes have a pretty great rally heritage. This on I just happened to find in a barn and I got it running. And it just evolved into the car it is today. I don't run full stage road rally with it yet. I'll get there eventually.. But it is a pretty good rallycross car. It's gets ran hard and is still probably one of the more reliable cars if got.

[@HODGEPODGEDODGEGARAGE]

Whoa Terry!! 😮 I bet that was a sight to see my friend! Thanks for the kind comment as always. Did he fix the car after that? Sorry for taking soo long to reply. I've been busy at work and this heat has got me exhausted. Take care my friend :)

[@machinist5828]

@@HODGEPODGEDODGEGARAGE I as far as I know he did. I had to move away and lost track of him. He also had a 429 powered Ford Courier that was wicked too. Last I knew both were out in Oklahoma somewhere. No worries on the busy my friend. Been there done that. Cheers Terry

[@machinist5828]

@@graveloverlord oh yeah! I was stationed in England and know well of the Vauxhall Chevette. I had it's big brother Cavalier. I just saw a Ford Cortina on marketplace a couple of weeks ago. The ad lasted 38 minutes. I guess the Chevy Chevette would make an interesting rally car too if set up right. Tough little cars... LOL! Cheers Terry

[@HODGEPODGEDODGEGARAGE]

@@machinist5828 a 429 Courier would be wicked!! 😲

[@thomasschimdt5217]

The rings might be frozen. You will have to put some penetrating oil in it on the pistons and let them soak.

[@HODGEPODGEDODGEGARAGE]

Good idea Thomas 🙂👍 Thanks for stopping by 🔧🔩

[@kevinlamarr1424]

I watch all the way and sometimes twice. I just bought a 2005 Mack sleeper for $13,500 it has the Mack M-7 engine with 572,000 on it. The truck starts right up and shifts fine.The inside is filthy and the driver seat 💺, cabinets and bed 🛌 are missing. It’s an old driving school truck but that’s not a problem for me. I’m going to pay to get it road worthy while still driving. All of my tools are in storage.

[@HODGEPODGEDODGEGARAGE]

Hey Kevin, how are things my friend!! 😀 Long time no talk!

[@kevinlamarr1424]

@@HODGEPODGEDODGEGARAGE On the road full time now getting caught up on your videos

[@derekdickins7256]

S on small gear lever means Start.

[@CarlosRodrigues-zc3mx]

Que Belo trabalho parabéns Sou do Brasil cidade são José do Rio preto sp Trnho dois MF 35 perkins 3 cil,muito bom trator,funciona perfeitamente

[@HODGEPODGEDODGEGARAGE]

Obrigado pelas amáveis ​​​​palavras. Ouvi dizer que são bons tratores. Esperamos ter este trator novamente montado e funcionando neste verão.

[@rogerlalonde703]

Well Zane my projects of the weekend are trying to get one of my rental units finished up so I can rent it out yesterday I started by two toning the hallway put the primer on the bottom half of the wall then while that was drying I cleaned all the windows and frames then painted the lower half of the walls so while that dried up I started to remove the old sink and countertop but only ended up taking out the sink my wife wanted some some French fry’s with cheese and grayvy oh I not sure if I had mentioned in the past that she’s battling cancer for the last two years and the last few weeks it’s been rough for both of us with me being back at work finding it tough cause I’m not there to help out Zane sorry rambling on but thanks for letting me vent even though I a pure stranger to you but I do appreciate your videos they give me drive to do my jobs at hand thank your friend Roger Lalonde

[@HODGEPODGEDODGEGARAGE]

Don't ever feel the need to apologize Roger! :) I enjoy reading comments. I'm sorry to hear she's fighting cancer. Hang in there my friend. Sorry it took soo long to reply, I have been swamped at work. This heat really isn't helping out either , But I would rather sweat than freeze any day. I'm hoping you can get your rental property fixed up soon enough. Then it's relaxation time :) Take care and I'll talk to you later

[@derekgoff7856]

Great new video, looking forward to the next in the series.

[@HODGEPODGEDODGEGARAGE]

Thanks for the view and kind words Derek. :) Both are much appreciated. We're hoping to have the tractor running next weekend. Take care and be safe

[@127ynot]

It’s worth about 5000 dollars in Ireland !

[@HODGEPODGEDODGEGARAGE]

Oh Wow! 😮 I never would have guessed that!

[@levikelley1842]

Hey man how the heck are you buddy!? Haven't talked to you in a while, just wanted to say hi. Keep working on these lil videos, you're doing awesome

[@HODGEPODGEDODGEGARAGE]

Hey, I'm good Levi :) How are you? Hope things are going well

[@jaratt85]

You know why you are having so many issues with this tractor right? You don't have the right attire to be working on it! Where's your bibbies and flannel shirt? You've gotta be wearin the right clothes or the tractor won't listen to you! :P And look, Dustin fixed the trans while wearing flannel! It's a thing I'm telling you! :D

[@graveloverlord]

You make a good point. I'll make sure to go back to flannel next time

[@jaratt85]

@@graveloverlord Blame Kevin of Junkyard Digs for that one with him reviving everything needed to plant corn.. which somehow actually all worked.. and he was wearing bibbies and flannel the whole time.

[@HODGEPODGEDODGEGARAGE]

I think you're onto something!! 😂 Now I gotta go buy a flannel shirt! Thanks for the view and funny comment my friend. I hope all is well with you!

[@scottcroney1703]

Dang your boy scott is slacking on a couple of videos.....

[@HODGEPODGEDODGEGARAGE]

No worries Scott! :) Life comes first my friend. I hope all is well with you. Take care

[@koriralfred4577]

Can you sell it to me

[@graveloverlord]

Where's the fun it that? ;)

[@HODGEPODGEDODGEGARAGE]

Dustin plans on keeping the tractor to use on his property. Thanks for stopping by though :)

[@DependableAutoTruck]

i tried to email you about the SD card but it either didn't get there or i haven't heard from you i added my email to my you tube channel if you want look up Dependable auto truck i have a few videos on there and you can get my email address

[@HODGEPODGEDODGEGARAGE]

I will be sure to send you an email soon! I greatly appreciate the offer. Sorry it took me a while to respond. I've just been swamped with work. Take care and I'll talk to you soon! :)