This man has actually contributed worthwhile knowledge. I applaud you sir.
@lowridingtrucks885 ай бұрын
I appreciate it 👍
@simterio30775 ай бұрын
Put another piece of wood underneath it
@datamike00 Жыл бұрын
obvious tip , now that you showed it😊
@finalcam17406 ай бұрын
This is way better than the other methods I saw where you screw on a piece of scrap wood over the hole to have something for the arbor. Nice.
@WeldingForJesus5 ай бұрын
Especially if you drill metal
@bhamsoxfan725 ай бұрын
That wouldn't work as well because you're drilling\sawing "blind" (you don't know exactly where the hole underneath is doing to be). However, if you drilled the correct size hole in the scrap first, then held the scrap over the actual workpiece, you can take the pilot bit out of the arbor and the scrap piece will keep your hole saw bit in the correct position. Alternatively, I just saw one where the guy took the round scrap he had just drilled and put it halfway on the pilot bit, then the round scrap would stay in the hole until the bigger hole saw bit got started.
@SIR_TOOLS Жыл бұрын
Brilliant! Thanks for sharing ive ran into this issue several times now I know what to do next time.
@deathsicon6 ай бұрын
Opened an old hole i didn't have the original size for, just cut a hole of the new size in a piece of scrap plywood and centered it over the one i needed to expand worked fine
@TheRealElDiablo Жыл бұрын
Killer tip!
@dwaynelegacey583 Жыл бұрын
I got you and thanks for the heads up much respect
@sly1968si Жыл бұрын
At last, a tip that's actually useful. Thanks.
@1stviper16 ай бұрын
It blows my mind how many people in construction don’t know this. That is literally the reason that hole saws get shallower the wider they get, so the size down from it can be used as a pilot bit if required.
@mikeeilbes3645 Жыл бұрын
Learn something new every day. 25 years ago.
@gccjarsonists6 ай бұрын
I feel so stupid after watching this, this is one of the very few that actually has good advice!
@user-ds9fh4ij2e7 ай бұрын
Dang i needed this like four months ago lol
@08shomola Жыл бұрын
Now… show how to redrill the hole if I drill it TOO BIG!! 😅
@WakingUpSux Жыл бұрын
I've cut this damn chair leg 4 times and it's STILL too small!
@rafaelkestafa6 ай бұрын
Yeah,i tried that the other day,and with a holdizer set too. You cant fit in both bits in the same threaded part. There's not enought threaded section.
@hunterwilloughby16696 ай бұрын
Getchu a different arbor bit they’re not all the same some have short threads
@shannonsisk Жыл бұрын
Seems so obvious now…
@fathersondiygarage3580 Жыл бұрын
We thought the same thing when we learned it lol
@MrTacoMan2475 ай бұрын
Love learning something new everyday thank you
@jacob-pf9pi Жыл бұрын
Depends on the brand
@marodification5 ай бұрын
Could also use the block of wood that came out.
@waynewilson39715 ай бұрын
sweet thanks! good info!
@niklar55 Жыл бұрын
Useful!
@augustinpabon48886 ай бұрын
Thanks for the tip
@fuq69396 ай бұрын
Old knowledge but the newbies can learn from this
@timothyroome-traut83246 ай бұрын
Thanks man!
@AngelRios-mq6cf Жыл бұрын
🔥🔥🔥🔥🔥this is what we’re all here for pro tip
@DreadfulDreamer6 ай бұрын
That’s so smart! What my mind is blown!
@Etherglide5 ай бұрын
Great tip
@williamwagner24685 ай бұрын
Very slick! 🤪🔨
@AJ_900 Жыл бұрын
That’s an actual pro tip, thank you
@OhKindSir6 ай бұрын
That’s brilliant
@user-hh6hd5sn1k4 ай бұрын
I’ve tried this but my dang threads ain’t long enough to catch both hole saws
@frozenprakash2 ай бұрын
Ingenious ✨
@auzi388pride6 ай бұрын
Tip noted, this actually is really usefull information.
@911skateordie5 ай бұрын
thanks
@forestcamma45395 ай бұрын
How many people are going to make this video I swear I see someone making one of these everyday lol
@billjohnson7968 Жыл бұрын
I keep a couple washers in my bit box so it stands out a little more.
@reactiontube7286 Жыл бұрын
😂. And I’ve been making a jig this whole time. Cool
@SkilledLabor6 ай бұрын
I’ll take it!!
@pcakes1878 Жыл бұрын
wow that is lierally genius
@04Corolla5 ай бұрын
my boss asked how to center a hole saw when theres already a hole, tole him about this trick and he then told me we screw a thin piece of wood on top and find center again. We work on boats and the wood was wet and oily it was a shitshow drilling through it for the transducer
@eurithmicsrocks5 ай бұрын
I wish I could do this with spade bits
@isaacd356 ай бұрын
Damn that was good
@bryantaylor4139 Жыл бұрын
Finally a tip we can actually use😂
@danaudit66616 ай бұрын
Nice
@wayneprice69186 ай бұрын
Drill from both sides for a cleaner hole .
@BUCKSTALKER1235 ай бұрын
This is actually how to make delicious homemade pine donuts. I like to add some cinnamon and sugar lol
@si12mn315 ай бұрын
Has this actually worked for anyone I can never seem to get the old size to actually screw on
@RedHeatedStepChild11 ай бұрын
Brilliant
@soldjahboy Жыл бұрын
Wow I feel really stupid for not thinking of this already... amazing bro!
@kidsythe6 ай бұрын
why not use the correct size in the start?
@Dpol855 ай бұрын
Im making some rings my next day off. Thx
@robertessaryjr.2834 Жыл бұрын
Now how do you make the big hole small again???
@joshodmo1978 Жыл бұрын
Luckily I have not had to use this technique. My diablo hole saw kit with the quick connect doesn't have this option. It's a damn goot set but can't stack bits like that.
@histguy1019 ай бұрын
Just put the wood cylinder u just cut out back on the bit in the bigger hole saw
@Tunadogg29055 ай бұрын
Dude that's what I'm talking about 😂
@tomstock2670 Жыл бұрын
Well don't I feel stupid now 😂
6 ай бұрын
Yea......but how do you make it smaller?
@pizza4breakfast3525 ай бұрын
What if I made the hole to big ?
@rossbryan6102 Жыл бұрын
AND WITH A LITTLE BIT OF ICING, YOU CAN GIVE YOUR PET TERMITE A SPECIAL SNACK!!
@kj1977349 ай бұрын
That works, but only if that is where you want the bigger hole.
@deadpossum100 Жыл бұрын
My man!
@C-Mah Жыл бұрын
Smart
@dradenmalinowski94575 ай бұрын
Take your finger off the drill trigger when putting hole saw on. Hole saws dont make very clean cuts on skin.
@michman2 Жыл бұрын
Oh GREAT! NOW you tell me!
@Mister2You5 ай бұрын
If you drill out the hole too big? Just reverse the order. 😁
@wildscoutloggi49075 ай бұрын
Damn I always wondered why it had 2 sets of threads feeling dumb af
@Rekrap425 ай бұрын
What a fucking goat wish I saw this when I first started plumbing😭
@garrettchurch604 Жыл бұрын
Before they made the hole saw like that you would have to cut a scrap piece of wood and put it over hole to stable the hole saw
@ShiverPlumbingTN Жыл бұрын
But why did you drill it wrong size ?
@robertsmelt66386 ай бұрын
Did anyone not already figure this out?
@kelinjohnson74214 ай бұрын
Fuck i wished i would have watch this before trying to drill my back door out.
@jodycwilliams3 ай бұрын
Measure twice, cut once and never use this. Pro-tip.
@modernrustics50696 ай бұрын
Here’s a tip. Use the right size hole saw.
@Simon-dp2df6 ай бұрын
Are you human? If yes then you will make a mistake at some point, nobody is Perfect.
@D5moke5 ай бұрын
You need makita 40v.
@kenthorne46113 ай бұрын
Took me 64 years to learn this?
@curtistemple2421 Жыл бұрын
Well, I’ll be damned some thing on KZbin. That’s actually a good idea. Holy fuck thanks buddy.
@Raysplumbing3126 ай бұрын
How many people are going to show this. Let the one person who thought of this have his glory man cmon
@YerZippersDown Жыл бұрын
Didn’t everybody’s dad teach them this ? Lol
@jcgelec5 ай бұрын
Or, you drill the right size the first time.😮
@markkhairov1205 ай бұрын
👍🏻👍🏻👍🏻👍🏻👍🏻👍🏻👍🏻👍🏻👍🏻👍🏻👍🏻👍🏻
@zacsampson96816 ай бұрын
If you are that far off on the whole size that is the first problem
@SmoothBrain23 Жыл бұрын
Nice I just screw em all on 🤣 one size fits all
@theone-ou3gd6 ай бұрын
Yup done this plenty times underrated tip
@militantmushroom201 Жыл бұрын
Simple but clever !
@JesusSaves71185 Жыл бұрын
Here is an age old tip tried and true. “Measure twice cut once.” Your welcome.
@aimonr.murphy54916 ай бұрын
Omg
@tomthackston14426 ай бұрын
Well it's the same hole saw!
@andrew1898 Жыл бұрын
As he does it. With his finger on the trigger. With the battery probably in the drill. Be safe bro wtf
@kevinmatulonis6 ай бұрын
If you know how to use a hole saw it won't walk all over the place
@constantzeros7183 Жыл бұрын
Holly cow haha
@chinstrap5233 Жыл бұрын
Noice
@Smokie181 Жыл бұрын
If you have to drill 100 holes, you now have to drill 200 holes. 😢
@kevingath9801 Жыл бұрын
Gotta double check somewhere around hole 1-10
@josephpope3467 Жыл бұрын
How could you be that far off.
@TheSir20055 ай бұрын
this wont work on a lot of arbors, a tip/trick shouldnt depend on what brand or what kind of arbor you have for your hole saw. Sorry but bad tip.
@Nikoty4206 ай бұрын
why are you pushing so hard bro
@delta-theoryarizona42565 ай бұрын
I muscled through that bih errtime
@geraldo4004 Жыл бұрын
Only works if arbor got enough threads. Otherwise ya screwed. Go full speed. Line it up and lean in easy till it bites.... Or use a pipe or something
@jasonnester95145 ай бұрын
I’m be guy posted this now a ton of guys are
@RE.MadStag5 ай бұрын
Literally used that tool once and figured that out immediately after my first hole was too small