Simple homemade tool to fix the adjusting screws on a 2 cycle carburetor using a small Phillip's head screwdriver and a cheap Bic pen.
Пікірлер: 31
@mikeezepekАй бұрын
Worked perfectly!
@angelaforke5787Ай бұрын
And fun tip…. For some reason the return hose for the gas tank seems to always crumble so you can use the inners of that ink pen to replace the hose(in a pinch).
@artbell26952 ай бұрын
My Lord, you're a genius. Your idea gave me for free and almost immediately what several dollars and an hour long trip to a hardware store would have cost me. This worked perfectly for my Poulan Pro PR28SD string trimmer. Your accent tells me you are from the South...where else could such creativity come from? Thanks.
@ovationsensation2 ай бұрын
Yep, a southern boy for sure. Glad it helped you out. Necessity is the mother of all inventions they say!
@Rich22CАй бұрын
They just make it hard for all of us but like everything else, there's alway a way to do the job if you try long enought.
@ralphbennett428612 сағат бұрын
Thanks for that info, I've have been looking for a Pac man scredrive to fit my Troy built and that's a no go so thanks again.
@ovationsensation11 сағат бұрын
@@ralphbennett4286 You're welcome. Glad it helped.
@ramonagarciabryant90512 жыл бұрын
Thank you so much. A million videos on KZbin about adjusting carb only a handful on what if u don’t have the right tool so again thank u. This video saved my sanity.
@ovationsensation Жыл бұрын
Glad it helped.
@crabtrap9 ай бұрын
ALL small engines WILL need this adj after first 30hrs. Factory sets them very lean to pass EPA. $15 buys u a set of the correct drivers
@ovationsensation2 ай бұрын
Yeah, I made this video when I was going to mow my lawn, but my weedeater needed adjusting, and I did not want to wait on ordering the tools. I had to think of something that would let me get the job done fast. I would advise people to buy the adjusting tools (which I still have not done even years later), but if they don't, then grab a Bic pen and a screwdriver like I did, lol.
@vernon8337 Жыл бұрын
I had to do the same thing, but I used a plastic sleeve on a wire crimp terminal, It worked, I pulled mix screw all the way out and with a dermal tool I cut a flat head screwdriver slot in it, so I wouldn't have to go through that next time I needed to make an adjustment
@saurid722 жыл бұрын
This worked brilliantly, thank you sir
@ovationsensation2 жыл бұрын
Glad it helped.
@frankworsley7476 Жыл бұрын
This absolutely blew my mind on how great this worked!! I have been trying to get my yard works weed wacker back up and running for the past 3 weeks. It’s an awesome unit and glad it’s running smooth again thanks to this trick. Can’t wait to pass on this trick to others.
@ovationsensation Жыл бұрын
Glad it helped brother.
@jppowell10252 жыл бұрын
My. Hero.....ty
@ovationsensation2 жыл бұрын
You're welcome.
@coastalplayer3 жыл бұрын
canceled my ebay order .. Thanks
@ovationsensation2 жыл бұрын
You're welcome.
@user-jv1kk7vg1f2 жыл бұрын
Capitalists fail, but American engenuity. Thank u.
@ovationsensation Жыл бұрын
You're welcome.
@quantumtechcrypto70802 ай бұрын
Just melt the tip of the other side too??
@ovationsensation2 ай бұрын
You should just have to heat the side you are inserting the screwdriver into. Make sure that whatever tip you are using will fit flush onto the adjustment screw. If the tip you are using is too large to fit flush against the carburetor adjustment screw, then slightly heat it and slightly crimp it. If its too small, heat it and use a nail to slightly enlarge it.
@toplarry11 ай бұрын
What does the tool cost ?
@ovationsensation9 ай бұрын
Not sure, probably not a whole lot on Amazon. But when I did this trick I needed the weedeater to be working that day. I did not have time to order one.
@user-jv1kk7vg1f2 жыл бұрын
Where is the lo screw?
@johnmilner7603 Жыл бұрын
Low screw is on the left and the high screw is on the right. Looks like his high screw is missing.
@ovationsensation9 ай бұрын
@@johnmilner7603Some of these carburetors only have one adjustment screw from the factory, like mine did.
@RageQuitSon Жыл бұрын
saved $17 and all the waste shipping an entire kit that i only need 1 driver from causes