check out my invention: • NEW INVENTION Parallel... facebook / ben.joiner.9 twitter / benjoiner4
Пікірлер: 33
@66THEOSU2 жыл бұрын
Had to make three trips to the bench grinder but finally success, works like a charm. Thanks for the tip sir, well done.
@grahamlowkes70266 жыл бұрын
Cheers for that. Certainly helped me out, especially on grinding down the 4mm socket. Genius.
@stevekelly63035 жыл бұрын
Great video. Thanks for your help. I did it yesterday and it worked
@autobotsvsdecepticons91653 жыл бұрын
Thanks for sharing this!
@donfrank44295 ай бұрын
great idea, thanks
@gseppi4 жыл бұрын
Awesome, thanks for the video!
@bassatisfaction5 жыл бұрын
Thank you, great tip.
@johnchilton74115 жыл бұрын
Thanks that was great Information
@timwade87664 жыл бұрын
Good one, thanks.
@sckirbyc14 жыл бұрын
You can buy this tool on amazon for like $6, or a kit of 12 different adjustment tools for like $12
@fredstone38753 жыл бұрын
Great video that was my 1st thought although I didn't know that it was 4 mm on the inside. I ended up taking a but connector stripping the plastic off of it shoving it down over that 4 mm and turning it with a pair of needle nose super quick super easy done
@jamesmason1249 Жыл бұрын
Thanks for tip!
@silverdragontaylir8252 Жыл бұрын
Genius
@tathanbailey62256 жыл бұрын
Makes me mad when the companies make such simple things ridiculously overpriced or hard to get.
@ieanmcmillan647Ай бұрын
The later blowers have an octagonal head just to make things that much more difficult. It’s not about emissions. It’s about the shop making money on services by not selling that weird 8 sided socket to the public. It’s available on eBay for $20. For me in Australia, it’s $50 with postage. Nice one, Stihl. Great way to foster relations with your buyers
@keithhuckfield41753 жыл бұрын
I bought that 10 piece tool kit that was supposedly compatible with my 2020 Stihl BG86 blower,but none of the tools fit,so I ended up sending the kit back to Amazon.My screws looked like some sort of hex,but the 4mm hex in the kit did not fit(too small),so I have a 4.5mm and 5mm on order,hoping one of those will fit.
@keithhuckfield41753 жыл бұрын
Turns out the 4mm hex was not the right tool..I need a 8 sided (octagonal) tool.My screw heads are octagonal shaped. I guess they changed head shapes again for 2020?!
@hphillips74255 жыл бұрын
Good video 👍. If stihl wants to make it where you can not adjust the carbs buy a different brand
@patmason72763 жыл бұрын
Cool fix. Yea hated that special tool crap when I worked at the Lincoln and mercury dealership its a game to keep you bringing it back to the dealership. Manipulated alot of tools over the years to get by.
@ihavetubes6 жыл бұрын
good video
@ApologeticsBenJoiner6 жыл бұрын
Thanks!
@cookiecutterdan6 жыл бұрын
Cheers for this. I have a strimmer that I refuse to put in for a £75 service when I know I just need to adjust the Carb.
@ApologeticsBenJoiner6 жыл бұрын
Glad to help
@JoshAllen-bw3yx4 жыл бұрын
Does this actually work ?
@herbdaniels89243 жыл бұрын
I have a STIHL FS 94R weed trimmer. I tried to buy a high/ low adjustment driver from a STIHL parts dealer, they told me the EPA only allows them to buy 2 a year, so they can't sell them. Sounded like bull to me
@Glockster45acp9 ай бұрын
I just came across this video. FYI, this is not Stihl's fault. It's EPA regulations. If you buy a tool from a third party, fine. If I, as a Stihl Dealer, sell you one, there is a potential $3800 fine if caught. And yes, customers WILL rat their dealers out.
@timothyarnick38264 жыл бұрын
I told a stihl rep I was going to a new company. Excuse of this and he told me to grind down my own tool.
@tathanbailey62256 жыл бұрын
I wanted to take the cover off my weed eater and I could not because of the shaft connector that blocks the casing from coming off. They put a hex bolt straight way down in the end of the shaft sticking out of the engine. Just take the shaft off the front of your weed eater and then look at the piece that is still left on the engine, there should be a squarish knob that slides onto the shaft connection to make it spin. Example of another way to make money for companies
@tathanbailey62256 жыл бұрын
At least this squarish looking knob was the way it was designed on my troy bilt weed eater, and oh yeah now I have to use hemostats on my carb screws because they are so puny and of course they decided to do that weird circle of metal around it so nothing but the tool they want you to buy fits. Anyways thanks for the tips, I don't own a grinder
@tathanbailey62256 жыл бұрын
shouldn't have to buy every screwdriver attachment that was ever made to crack open your weed eater.
@migueldaham49752 жыл бұрын
The dislikes comes from those who was to late to see the video.
@KingOfTheLosers133 ай бұрын
They don't want you to adjust the carb because they want you to drop your equipment off at the stihl dealer and pay $50 to have some guy who doesn't know what he's doing adjust it for you and wait 3 weeks to get your equipment back.
@Warsign013 жыл бұрын
Stihl dealer told me they will get fined $5k if the sell me that tool. Crazy, right?