--||-- How To Make HiFi Tweeter at Home --||--

Hello again, in this video you will find how to make HiFi speaker tweeter using old midwoofer, or using midrange for besr results in high frequensies because midranges have a leghtweight voice coil like tweeters, as you know leghtweight voice coil and diaphragm are very important for best high frequensies reproduction.
thank you for your support to hommeaudio channel, i hope you like the video.
link to other similar video on my channel :
-||- Upgrade Speaker to neodymium Magnet -||- step by step
• --||-- Upgrade Speaker...
-||- How To make Rubanoide Speaker At home--||--
• --||-- How To make Rub...
-||- How To Make Air Coil inductors -||-
• --||-- How To Make Air...
hifi speakers,
speaker tweeter
hifi tweeter
audiophile tweeter
how to make tweeter.
crossover audiophile,
audiophile capacitors.
nichicon capacitors.
elna silmic
audyn capacitors
jbl crossover
kef speakers
klipsch crossover

[@suryaelektronikrepairs]

Sangat bagus creative❤

[@homemade_audio]

Thank you 🙏🙏🙏

[@n.mk.m9434]

❤2\aaaaaaaazaaaaa_aaa

[@n.mk.m9434]

Aaaaaaaaaaaaaaas\zzza

[@n.mk.m9434]

​\

[@ЗЮЗЯ-к9т]

👏

[@eduardohenriquelima]

It is reproducing the treble frequencies with a metallic tone because of the metal dome. If it were a silk dome or other lighter material, it would reproduce a softer treble sound with greater wide-ranging high frequencies.

[@pixelreflectorpro]

The metallic sound can be fixed

[@33a333]

I was curious about how to create tweeter. Thanks to you, I understood. Thank you.

[@homemade_audio]

You welcome my friend 👍

[@johndough8115]

Bravo! These look VERY similar to my EPI 100v speakers "inverted" tweeters. EPI made two versions of them, the newer version of them, produces the most incredible, wide, 3D Sound-Stage, that you can ever imagine. You should also try Inverting the Cap... making in concave, instead of a Dome (just flip it over). The Concave shape, seems to be able to spread the high frequencies a LOT wider and better, than a typical Dome shaped tweeter. As for Midrange, the best Ive ever heard, was a 3 inch dome version (on a different speaker altogether. And typically, Im not a huge fan of midrange... but these were so very Buttery Smooth, that I was in love with them). The EPI tweeter plays the midrange frequencies pretty darn well. The EPI 100v woofers, are a special 8" woofer... that according to the Designer, he used a heavier gauge coil winding on them. He did this, so that they automatically filtered out the high frequencies... without the need for an additional Crossover component. They have very large, heavy, and powerful magnets... as they are designed to be in an Airtight box, and need that power to be able to deal with air compression forces. It uses the cabinet air like a centering spring. The bass is incredibly deep for the size of the woofer, and the small size of the enclosure. Its both deep and punchy... and at very high volume levels.. creates some decent vibrational shaking... similar to a sub. Whats most amazing about these speakers... is that they completely vanish into a room. In fact, when I first heard them playing... I spend about 10 to 15 minutes, trying to physically locate them. It was like the sound was just Holographically projected, into a 3d sound field... probably with a range of about 20 x 20 ft squared. The other amazing thing about them... is that they have such little distortion... that I was able to make out lyrics from a singer... that I could never understand before. Where normally... the musical instrumentations and effect... sort of Muddied together with his vocals... making it impossible to tell what he was saying. But with these speakers, the instruments were clearly defined from his vocals in that section... and it was easy to make out what he was singing. This level of power and precision control... is unmatched in todays ported ECO-Speakers. And as such, they cant even come close to what these 1970s era speakers are capable of. They totally blew the local high end stereo shops $3500 speakers, completely out of the water. No competition at all. One of the original workers from EPI or Genesis, still repairs, and custom builds, brand new EPI replacement drivers, at Humanspeakers dot com. According to him, he made improvements to the already fantastic EPI 100v inverted tweeter. That said, Ive never heard his updated version in person... so I couldnt say anything either way. Id been considering trying to add a 3" dome midrange the mix... and potentially either a 2nd woofer or a passive radiator, to see what might happen. But as Ive said, they sound fantastic as is. Better than anything Ive ever owned / heard... and thats saying a lot, as ive owned over 30 different speakers, and have heard some really unique and rare speakers, in my lifetime. It would be nice if you actually make a c-shaped box (open baffle), when you play these as a test... so that people can get an even better idea of how they actually sound.

[@jorgeolivares9288]

Who you talking to?

[@strokerpro9758]

Horn tweeter yerine bu pleksi yöntemini kullanacağım 👍

[@mujiwaluye5991]

Salam hangat dari Lampung Indonesia,, sangat kreatif❤👍👍👍

[@homemade_audio]

Thank you 👍

[@nanakurnia8499]

Gud job,!!!!!!

[@homemade_audio]

Thank you 🥰

[@Tarikhafidmusique]

الله يوفقك ❤

[@homemade_audio]

شكرا جزيلا أخي 🙏🙏🙏

[@Tarikhafidmusique]

@@homemade_audio خويا عاديل

[@nayangoi9523]

Hi.Its nice. But a KZbinr technical sokil copied your video. HE made exact same tweeter with same method.

[@kimberlytercino8970]

The Indian guy copied your work Indian cheater

[@CambiodeRumbo]

amazing job!!! suscribed!!!

[@homemade_audio]

You welcome 👍

[@enriquegonzalez2802]

Great technique. Just a question: why not to center like a bass speaker and then place the dome? 🤔

[@homemade_audio]

Because on tweeters in most of cases the dome and surround are one unit! Same material !

[@conskgosane]

Good JOB

[@alimafivecirebonesia182]

Mantapsssss

[@mostafasamin7759]

لطفاً یک نمونه دیگه از این ویدئو بسازید... یک توییتر مشابه همین... ممنون

[@ainulleo4413]

Good job,your amazing👍

[@homemade_audio]

Thank you 🙏

[@aleson135]

Good job, but I'm afraid the mass of the moving system will be too large!

[@homemade_audio]

No, not large, because the plexiglass and the diaphragm support under plexiglass have the same hole diameter = suspension diameter reduced

[@cahgunung69]

👍 Good

[@homemade_audio]

Thank you 👍

[@Candrasound123]

Joss

[@user-cc9ti8gx6w]

Центровка катушки просто супер😂😂😂😂

[@homemade_audio]

Yes. I'm used to install surround foam with the same technic on midwoofer/ woofer without removing Dust cap 😁😁😁 You'll find a video about that on my channel.

[@user-cc9ti8gx6w]

@@homemade_audio классно, извини, но у меня нет интереса, если бы я хотел это повторить, но не имею возможности, мне летать охота!)

[@realand3]

What distortion and what frequency range does this tweeter provide?

[@dimitrisraggas8924]

Thank you for this very inventive video. What if i dont remove the half wire of the coil and i leave it as it is? The resistance will remain 8 ohms but Is it going to sound ok?

[@homemade_audio]

apart from the weight, the width of the tweeter coil must not exceed that of the top plate, the coil must vibrate in the magnetic flux created by the top plate for best HF reproduction.

[@davidnguyen5028]

What is the solution that you put on the spider to remove it?

[@megadjmaximilianomega7950]

Buenas tardes esto lo puedo aser con tener solo unos parlantes q ya no utiliso verdad. Mi consulta es como calculo la impidencia de la bobina ya q nesesito q quede a 8homs Le agradeseria una opinion Muy bueno el video 👍 Saludos desde argentina bs as

[@zaqueuoliveiraalmeida8810]

Good morning friend, great video... what product do you use to remove the centering? Thank you and good luck.

[@homemade_audio]

Hello, Paint thinner or acétone.

[@zaqueuoliveiraalmeida8810]

@@homemade_audio OK thank you

[@tapanpal8641]

speaker cone paper cone vs reinforce Polypropylene which one best , polk speaker xt series vs es series which one best

[@InfinityFan-mphHD]

Amazing science project. But why do tweeter have capitator?

[@homemade_audio]

One Capacitor in serie with tweeter is a first order high pass filter. Low frequencies destroy tweeter.

[@ЧАЙНИКИ-ПАЯЛЬНИКИ]

Is it a compression driver?

[@inoid724]

sehr gut, très bien, muy bien, molto bene, mycket bra, 非常好, очень хорошо, πολύ καλό, 매우 좋은, 非常に良い, çok iyi, meget godt, очень добре, बहुत अच्छा, rất tốt, mycket bra, بس بہتر, ການທີ່ດີນີ້, ແຕ່ງຂ້າງ, ល្អណាស់, ດີນີ້ດີ, ਬਹੁਤ ਵਧੀਆ, ເສຍຊີດີນີ້, खूबसूरत, ಅತ್ಯುತ್ತಮ, အနက်အသေးဆုံး, ખૂબ સારું, വെറൈസ്റ്റ് ഗുഡ്, ಅತ್ಯುತ್ತಮ, వెరీ గుడ్, ดีมาก, خوب بہت, جيد جدا, খুব ভালো।

[@homemade_audio]

🙏🙏🙏🙏🙏🙏🙏🙏🙏🙏

[@chrisfaria107801]

Amei. Vídeo

[@alexandrvolkov2511]

Молодец.

[@ringkoko4438]

nice

[@Coledibiase1978]

You should've rewound the coil with thicker wire. You just reduced the wattage it can handle.

[@KucayAntony-lo9zq]

Mantap joss gandooss*?

[@rztmoster]

ขอบคุณครับ

[@36qm]

Hello my friend, everything all right? Miss your content! Sorry for my english...

[@gaborkovacs8765]

what You did, is very interresting, but i see to much weight! for a tweeter!!!!!!!! for material what is have to move fast @high frequanzies

[@Walter_ElBrotman]

Buenisimo,

[@suryapatnaik5720]

I had 4 ohms woofer, do i need to remove half of the coil??

[@theloudspeakernerd-tlsn9322]

Well you do have to remove the coil if there is alot of it. The coil is heavy enough to reduce the frequenzy response by alot. This means that the tweeter isnt able to go as high

[@Synthematix]

Believe it or not the smaller the tweeter the better, 1/2" tweeters are far superior to 1" types for frequency response and axis output

[@homemade_audio]

This is just a small fan project for audio amateurs beginners 🤷‍♂️

[@EdwardNakagawa-q3t]

HOWS THE EFFICIENCY, OF THIS ?

[@allyomaya-kf7qk]

Hi.is it posible to conver a 15 inch woofer to tweeter

[@homemade_audio]

No , too much big!!! It's possible to convert it to dome midrange driver 😉

[@mohitdas9267]

Awesome

[@homemade_audio]

🙏🙏🙏👍👍👍

[@Indian56671]

Very nice But glas cutting problem

[@homemade_audio]

No, not a glass, it's a plexiglass which is easy to cut and drill. Plexiglass is a transparent plastic 😉

[@prakashshrivastava6132]

Camical kaun sa use karte hain. Har vdo mai

[@homemade_audio]

acetone to remove glue. Rubber glue for other fixings.

[@samd3231]

Original assembly especially the adjustment by ear LOL... it won't last long it will quickly crackle in my opinion... it's only my opinion lol LOL Original de montage surtout le réglage à l'oreille MDR... ça va pas durer longtemps ça va vite grésiller a mon avis ...ce n'est que mon avis lol MDR

[@jakapermana7580]

Cairan yang digunakan untuk melepas membran itu namanya apa dan dimana belinya?

[@homemade_audio]

Acétone

[@Kayke.criatividade]

top de vdd

[@homemade_audio]

Thank you 🥰👍

[@MariaTereza-vg2vd]

Top demais nao e original mas quebra um galho

[@kucingarema]

👍

[@fatihylmz_6816]

What is the rms value?

[@EdwardNakagawa-q3t]

HOW ABOUT HORNS, THEY MORE EFFICIENT !!

[@retailkaing]

It's better to purchase from mkt

[@albertycarlos-wb9qg]

✨👏👍

[@homemade_audio]

🥰🥰🥰🙏🙏🙏

[@ixo_strufa3512]

Make a tweeter at home❌ Make a tweeter at factory✅

[@arjaygarbin3848]

Can i use old 12 inch woofer?

[@homemade_audio]

No, too much big

[@iuliandumitrescu9441]

Diametrul firului de cupru este prea gros pt un difuzor pt frecvente inalte !!!!!!!!

[@josegsanchezh]

Que se llama el líquido que despega la araña o el cono

[@MonkeyBlueAss]

paint thinner

[@ramjeetram6954]

Silk dome tweeter

[@homemade_audio]

👍

[@FPRO_Audio]

Next add phase plug

[@oldscoolhifichannelgmh3574]

der schöne wharfedale tieftöner

[@homemade_audio]

No, not wharfedale !!! It was vintage kef b200 midwoofer.

[@htrawa]

@@homemade_audio Dass ist noch schlimmer

[@shahram2447]

"At Home"! By industrial instrument 😅

[@homemade_audio]

False 😁. What i did based on lathe machine can be done without it 😉

[@kjell-akeapell3285]

I rather buy one!

[@homemade_audio]

This project is for the pleasure of making our own tweeter, not to save money!

[@kjell-akeapell3285]

@@homemade_audio OK

[@homemade_audio]

@@kjell-akeapell3285 😉👍👍👍

[@UvtfuUccyu]

Bro u can fix it why would you turn that into tweeter what is wrong with you 😂😂😂😂

[@muhammadbuddy4195]

Konten

[@Anakbangsa-g2k]

Bahan nya pakek apa aja om

[@kneeyou]

Will it be still an 8ohms speaker?

[@homemade_audio]

no, about 4ohms

[@arjaygarbin3848]

It removed half of the rewind... so it will divide the resistance into 2..

[@homemade_audio]

@@arjaygarbin3848 yes

[@suryapatnaik5720]

I had 4ohms, do i need to remove half of the coil??

[@aransmitch]

You made a slight mistake. You don't insert the plastic sheet separating the magnetic core with the coil cone. It doesn't center the coil. Appreciate the idea.

[@homemade_audio]

No, it's not a mistake, i did that technics to centering the voice coil for all drivers , it's very useful if you want to repair surround foam without removing Dust cap, i did a video about that. As you know speaker with modified dust cap lose value when you want to sell it.

[@gericsoreda1589]

Break a speaker to make it to a tweeter😂

[@homemade_audio]

@@gericsoreda1589 No, broken speaker converted to a tweeter 🙆🏻‍♂️🙆🏻‍♂️🙆🏻‍♂️

[@puchinipipito4031]

Quita esa musicaaa

[@homemade_audio]

👍

[@MrMit36rus]

Работать в перчатках .... Жесть

[@MBJaudio]

Orang indo😅

[@homemade_audio]

😪

[@nhamaybinh7501]

100khz

[@homemade_audio]

Why not 😁😁😁

[@EdwardNakagawa-q3t]

TOO MUCH WORK, DOING THIS, ANYBODY GOT A MACHINE SHOP ? BE REAL *

[@mr.plantito4545]

Full watching.done subscribe

[@homemade_audio]

You welcome 🙏

[@EdwardNakagawa-q3t]

TOO MUCH TROUBLE, WHERES RADIOSHACK ??

[@PeterNetped]

[@hotasianstepsister3039]

That's about 50 watts Max power