Honda CB600 Custom Cafe Racer by Moto-Technology

[@robert-to7ev]

I think this is my favorite build. I just love the stance. Also, really enjoyed watching the bike being assembled. Intro is sweet too. Thanks for sharing.

[@Moto-Technology]

Thank you, we are trying to constantly develop and pursue the set goals, more films about our production coming soon!

[@anonymousreaper2186]

Brother can u please tell the name of the intro beat its so sweet.

[@mri8949]

Great bike, thanks for showing the completed bike at the end for 3 seconds 👍

[@Moto-Technology]

Thanks! please visit our website www.moto-technology.pl

[@timimoun01]

قوة إبداع إتقان دقة ينتج هذا الوحش قطعة هندسية جميلة متوحشة قوية ماشاء الله اللهم ارزقنا مثلها يا رب العالمين تحفة فنية رائعة وتمتاز بالقوة والجمال

[@Moto-Technology]

Thanks!

[@yillbyunglee1606]

Wow! I liked the way you sequentially show the whole assenbly process. Great job!!!

[@Moto-Technology]

Thanks!

[@Alexso22192]

Meega robota szacun😱

[@Moto-Technology]

Dzięki!

[@ducatimonster1429]

Masterpiece. Keep going

[@Moto-Technology]

Thanks 😉

[@luciolopezlopez6071]

Holy moto! Best regards!

[@Moto-Technology]

Thanks!

[@thierrygerard4228]

Nice bike Nice job ,i had 2 hornet 600like these

[@Moto-Technology]

Thanks! Best regards from Poland!

[@Melan.D]

What upper triple tree is that(cbr)? Also have the clip-on bar clamps been welded on to the triple tree? Beautiful build btw… 🖤

[@Moto-Technology]

We made triple tree. No welded!

[@Melan.D]

@@Moto-Technology ohh. Can place an order? Also will this fit a hornet cb250

[@Moto-Technology]

@@Melan.D we made only BMW actually 😉

[@jnfmx3032]

Que linda . Parabéns aos envolvidos

[@Moto-Technology]

Thanks!

[@marccinekk1]

Ogień !

[@Moto-Technology]

Dzięki!

[@blinkiben]

Just purchased a 98 cb600f because of this video.. Bike looks awesome!!! Well done!. Is there anymore information about the build anywhere? website ect that i can take a look at? Thankyou!

[@Moto-Technology]

moto-technology.pl/work/honda-cb-600-2002/

[@rcattaneo6755]

it sucks that the best and final part gets blocked and ruined by the links for two other videos. I would have liked to see the motorcycle fully.

[@Moto-Technology]

moto-technology.pl/work/honda-cb-600-2002/

[@ramonlemence4932]

Beautiful 🥰🥰🥰

[@Moto-Technology]

Thanks! ✌️

[@juanfernandogonzalezalba3180]

Holaaa donde compraste los estribera Gracias 🙏

[@Moto-Technology]

Hola. Los hemos hecho 😁

[@francescobiondo8023]

Ciao,lavoro stupendo, complimenti! Posso chiederti quali soffietti hai usato e di che misura? Grazie mille!

[@Moto-Technology]

Grazie mille! Ti risponderemo ma non capisco bene cosa intendi, per favore descrivi cosa vuoi chiedere?

[@HendrixCool]

@@Moto-Technology Mi riferisco ai cilindri di plastica che coprono le forcelle

[@gvc706]

Wow great 👌👌👌

[@Moto-Technology]

Thanks!

[@jean-pierreart891]

Dis you change the size of the back wheel,,,look larger ! what did you do?

[@Moto-Technology]

the wheel is original ;) best regards from Poland!

[@eta9541]

unable to see the final build lookslike, why the video edit like this ? waiting 4 minute for nothing.

[@Moto-Technology]

moto-technology.pl/work/honda-cb-600-2002/

[@bundrigthefirst3655]

Hi. When you replaced the airbox what did you do with the two hoses that feed into it? Thanks.

[@Moto-Technology]

conical filters have been installed on the engine venting pipes that come to the airbox

[@ghawrot1]

Could you tell you secret? Your jetting for pod filters?

[@Moto-Technology]

I don't know what exactly you mean, please make your question clear. The exhausts are made according to our design. Greetings from Poland!

[@ghawrot1]

@@Moto-Technology what's the jet size did you use for this air filters?

[@barathsindhe5944]

I love the way u did it bro...😘

[@Moto-Technology]

Thanks!

[@flxgames2814]

how personalized is the CB 600 to have the seat lowered also from harley Davidson no?

[@Moto-Technology]

what do you mean? yes we can make such a low seat for you, it all depends on the project.

[@alfredokmc6558]

Is there a pary 2? I'd like to see it running and walk around 🙌

[@Moto-Technology]

Sorry, we don't have, but we make new honda 😉 You will see soon 😁

[@drewwalker1644]

Great job!

[@Moto-Technology]

Thanks!

[@Moto-Technology]

Thanks!

[@oscarmartinezarmas9246]

Quedo hermosa

[@Moto-Technology]

Thanks!

[@gom-vj5fh]

สวยงาม

[@Moto-Technology]

Thanks!

[@azmietalib5297]

So nice

[@Moto-Technology]

Thanks!

[@lamagra413bbpd3]

Is the top triple tree with the clip-on bar mounts a custom built item that you fabricated? The bike is amazing!!!

[@Moto-Technology]

We create all elements according to the customer's order. Thank you!

[@adamaskoldaltman4976]

Nice. Well done

[@Moto-Technology]

Thanks!

[@roakhiangtengat7984]

Nice

[@Moto-Technology]

Thanks!

[@ruurd2009]

Which grips are those? They are gorgeous. Would love a link

[@Moto-Technology]

Thanks!

[@Magamata-EE]

How did the original bike look like? How does it ride (got a ride video?)? Overlay blocks view of final pictures.

[@Moto-Technology]

Honda CB 600 photos can be seen on google, the ride was very comfortable, the motorcycle was handed over to the customer.

[@nickeleytheriou5005]

we can't see it with all these pop-ups at the end. Have you made any other video with this specific build? looks very interesting but need to see more details

[@Moto-Technology]

we have photos, please contact us E-mail: [e-mail]

[@billymichels7171]

Cool looking bike. Am just about to start similar project with the same model. I'm curious to know what gas tank you used. Thanks.

[@Robson-rides]

Did you get the answer for this?

[@billymichels7171]

@@Robson-rides no I didn’t but would still love to know.

[@Moto-Technology]

the tank is 100% made by us, you can find illustrative materials on our social media.

[@Moto-Technology]

@@Robson-rides answer up

[@Moto-Technology]

@@billymichels7171 answer up :)

[@brwhyon]

Nice build, did you have to change carb jets to run pods? I've an 89 that I am planning on doing similar.

[@Moto-Technology]

Please write to us on our email: [e-mail]

[@coachk9316]

@@Moto-Technology can I make this happen on a 2000 CBR F4

[@Moto-Technology]

@@coachk9316 Yes you can. It all depends on the ability to weld and fit the elements, the entire exhaust system was made by us to the customer's order.

[@coachk9316]

May i get a ball park on possible price to get something like this done

[@Moto-Technology]

@@coachk9316 Please contact us, our e-mail: [e-mail]

[@thisisthewolf9521]

Just love this project. How did you make that headlight? Is it painted?

[@Moto-Technology]

Thanks! it's special termo foil

[@ณัฐพรแก้วกัญญา-ถ2ฐ]

สวยมากอยากได้จังครับ

[@Moto-Technology]

Thanks!

[@mladentomic8356]

How much cost like this bike??

[@Moto-Technology]

8000 EUR

[@mladentomic8356]

@@Moto-Technology but where can you buy that motorcycle?

[@Moto-Technology]

@@mladentomic8356 in Poland

[@mladentomic8356]

@@Moto-Technology I send mail on your site.

[@Moto-Technology]

@@mladentomic8356 ok

[@rodrigosilva-et9mu]

Ficou show 💪 Essa moto é uma Hornet da Honda?

[@Moto-Technology]

Thanks! and yes, it is Honda Hornet CB600

[@raslcustom]

hello, I installed such air filters as yours, the motorcycle does not eat, what needs to be done? ((((

[@Moto-Technology]

"the motorcycle does not eat"? what you mean?

[@raslcustom]

@@Moto-Technology the motorcycle starts, but stalls when I turn on the gas!

[@Moto-Technology]

@@raslcustom it should not be the fault of the filters.

[@raslcustom]

@@Moto-Technology just filters dude! I already figured it out!

[@Moto-Technology]

@@raslcustom good job!

[@selverfeyzullayev1332]

👍👍👍

[@Moto-Technology]

Thanks!

[@mikethompson7046]

Awesome video.

[@Moto-Technology]

Thanks!

[@wickedgrafix]

Love how you tube puts up thumbnails over the final product so you can't see the end of the video.

[@Moto-Technology]

We can share photos, write to us by e-mail: [e-mail]

[@julio225]

Can you make me the exact same seat structure? How much would it cost with a shipping to France?

[@Moto-Technology]

seat cost (ready version - powder coated, with upholstery, turn signals and rear lamp) = 420 EUR + 30 EUR (shipment)

[@davidjimenez7221]

De que moto es ese depósito, por cierto, espectacular moto 👌🏼

[@Moto-Technology]

Thanks!

[@lookatme8865]

Where u from n how much u charge to modified regular bike to cafe racer ?

[@Moto-Technology]

we are from Poland, the price depends on the customer's vision, if you are interested in a quote, please contact us by e-mail [e-mail]

[@MarvGuerro]

I have a 2019 cbr600rr I wish to do a cafe racer

[@Moto-Technology]

Awesome! Send us photo, when You end your dream custom Moto! 😎💪 Best regards from Poland!

[@MarvGuerro]

@@Moto-Technology I might have some pics of my previous cafe racer build. Previous was a 2009 Yamaha R6s this time I'm giving Honda a try this time since my cousin insisted on taking my R6 off my hands I plan on doing the same design just with Honda look instead. Hope he loves her as much as I did when she was mine. Lord knows how hard it was saying goodbye...

[@Moto-Technology]

@@MarvGuerro We like all custom motorcycles, but we specialize in BMW K100 / K1100 - we would love to see your project, feel free to send us your photos! Greetings!

[@sivanada8865]

Hi, highly appreciate could you share with me from where you bought the chassis?

[@Moto-Technology]

A complete motorcycle without modifications was bought in Poland.

[@sivanada8865]

@@Moto-Technology, looks like the chassis is custom made, is fabricate by you or is came with the bike?

[@Moto-Technology]

@@sivanada8865 All modifications were made by us.

[@sivanada8865]

@@Moto-Technology, Big respect ✊ to you all. Any chances that I can buy the same design chassis from you all?

[@Moto-Technology]

@@sivanada8865 Please contact us via our e-mail: [e-mail]

[@beck696]

Its a cbf 600 or Hornet 600 ?

[@Moto-Technology]

Honda CBF 600 S Hornet PC36

[@davidlaidd7094]

What kind of fuel tank is this ? pls

[@Moto-Technology]

is 100% made by Moto-Technology

[@Bennymisc]

Where did you get that radiator from? I'd like to get one for my bike

[@Moto-Technology]

This part is original from the CB600

[@alexandrehenry7852]

it looks like the original radiator from a honda hornet or cbf 600. My hornet has this exact radiator.

[@Moto-Technology]

@@alexandrehenry7852 This radiator is oryginal from CB600

[@mikethompson7046]

I would like to see some more detailed steps if you care to do so and maybe a stripdown or some of the planning that went into it

[@Moto-Technology]

We are thinking about the project, where we will illustrate the modification in more detail and talk about the entire modification.

[@muf]

How much?

[@Moto-Technology]

7000 EUR

[@desmoteo9399]

bel progetto bravi!!!!! però se spiegato meglio nelle fasi di costruzione , anche con un video più lungo , guadagnerebbe sia il video sia la vostra abilità

[@Moto-Technology]

we have recorded all the material from the construction of this motorcycle, maybe we will use it in the future.

[@erikeggenbakstad]

Build videos without music would be great!

[@Moto-Technology]

The music is not disturbing at all, you can mute it. Best regards!

[@erikeggenbakstad]

@@Moto-Technology Different type of music is subjective. Right? It was just an opinion. Happy to watch your uploads 👍

[@Moto-Technology]

@@erikeggenbakstad Thanks!

[@jyaj007]

I want this

[@Moto-Technology]

Great!

[@josefvidales]

Tengo la misma moto pero ese diseño está WAO XD

[@Moto-Technology]

this series is awesome!

[@josefvidales]

I have a little doubt, are you a company dedicated to customizing motorcycles? if so how much would something like video cost me? and are the motorcycles homologated?

[@Moto-Technology]

@@josefvidales Please contact us at our e-mail address: [e-mail] we will provide all the answers!

[@TazmanianDevil-y8z]

That frame and swingarm doesn’t look like it would last long. To thin and weak. Looks like it would start twisting

[@Moto-Technology]

it is the original frame, it cannot twist.

[@thekalistoic]

It is criminal that we did not hear it

[@Moto-Technology]

Yes we know ✌️😉

[@marcoboissey9926]

Ou trouver le même réservoir ?

[@Moto-Technology]

moto-technology.pl/work/honda-cb-600-2002/

[@adrianamariacortespenagos167]

Por favor me puedes decir el tanque de que moto es ?

[@Moto-Technology]

a tank produced by Moto-Technology, we created it ;)

[@surindersurinder5253]

Bike.price

[@Moto-Technology]

7000 EUR

[@รจนานามวงษ์]

งานมือ เอา CB600 OK.

[@Moto-Technology]

Thanks!

[@stefanogiorgianni109]

i don't understand why the video is playing so fast, if i decide to edit mine this video would be useless, but you were chased by the police

[@Moto-Technology]

We thought about showing more of the study material in a separate series. Perhaps it will be so in the future.

[@stefanogiorgianni109]

I prefer videos where they show you the changes, this teaches nothing

[@Moto-Technology]

Valuable note, so you should like our new videos more!

[@peeraphon1998]

Bike.

[@Moto-Technology]

Motorcycle 😎

[@stefanogiorgianni109]

presentata cosi non serve a nulla, dove sono i passaggi, quali parte da rimodellare, preferisco chi ti spiega come fare che un video del genere.

[@Moto-Technology]

welcome to our new movies!

[@walterreznov5515]

needs a turbo...

[@Moto-Technology]

🔥

[@RedMi-gj3fh]

Rs

[@Moto-Technology]

Thanks!

[@surindersurinder5253]

Hillo

[@Moto-Technology]

Thanks!

[@Shok391]

Hello ! Please modify 1 bike for me let me buy it with 3lakh

[@Moto-Technology]

please contact us on our email: [e-mail]

[@nedimsu]

looks very uncomfortable

[@Moto-Technology]

it may seem, but it's comfortable

[@torevenheim9607]

Look like a hornet

[@Moto-Technology]

😎

[@Elosbart]

kzbin.info/www/bejne/o3m3YpmQlqZqqNU Si

[@Moto-Technology]

It looks like a great motorcycle rally!

[@martinjau8326]

destroy a bike

[@Moto-Technology]

Destroy?

[@mdshadak228]

Nice

[@mdshadak228]

Yes

[@Moto-Technology]

Thanks!