Removing the internal gearing of the electronic shift motor on a 2000 Honda Foreman ES in order to convert it to full time manual shifting bypassing the problematic electronic shift function.
Пікірлер: 46
@gettindrunker4 жыл бұрын
Thanks so much man I was looking for a solution for this. Can’t drink beer and shift a damn button at same time
@EXDAMDEM3 жыл бұрын
LMAO...I CAN !
@bpm-pb6fy4 ай бұрын
How to thousand and two Honda fit through the rewiring the ignition
@bpm-pb6fy4 ай бұрын
Rewiring the ignition for the 2002 formula 350
@browning77503 жыл бұрын
A more adequate title Honda Foreman Electric Shift -Mod- *Gear Motor DELETE* :-)
@normanrose51045 жыл бұрын
if you do away with the es/shifting motor guts when you use the foot or hand selector does your gear shift numbers flash on the display?
@TigerCreekFarm2 жыл бұрын
Yep
@IREALLYcU2 жыл бұрын
Love your videos brother! Have you got any advice on how to get or what to check when my foreman 500 won’t shift into reverse? (I too have es model). Thank you for your videos
@TigerCreekFarm2 жыл бұрын
Not sure. Make sure the hand brake is engaging enough to allow it to go into reverse.
@VideoByPatrick2 жыл бұрын
Question : on my 2009 the motor mount is odd as it too has the position sensor mounted on same flange as the shift motor. I think only the Foreman 2009 has this odd arrangement trx500fpe. Any way I see three large bolts holding the entire mess onto the trans case. My question is, if I gut the various small motor gears and re attach everything to keep dirt out do I have to reconnect the motor wiring ? And will the dash show the gears when manually operated ?
@TigerCreekFarm2 жыл бұрын
I can’t speak to the 2009 but the 2000 shift motor can be gutted and reattached and connected and will show the gears.
@VideoByPatrick2 жыл бұрын
@@TigerCreekFarm Many thanks !
@VideoByPatrick2 жыл бұрын
@@TigerCreekFarm question: what does the angle sensor do ? Does it assess the angle of the bike for safety, and shut off trans when flipped ? Or does the angle sensor assess what gear your in ?
@TigerCreekFarm2 жыл бұрын
I believe the angle sensor assesses what gear you are in.
@VideoByPatrick2 жыл бұрын
@@TigerCreekFarm Thanks, I might try and get sensor off through that plastic cover and hope new sensor fixes sticking downshifts; upshits no issue.
@hershelthrasher5024 жыл бұрын
Have you had any problems after making it a manual shift? Ive heard of people breaking internals by doing this
@TigerCreekFarm4 жыл бұрын
Hershel Thrasher no - but I had to develop a bit of a feel and method for shifting. If you are heavy handed or footed it would be easy to put undue stress on the gears. I shift with a hand lever and use quick, short strokes that give me trouble free shifting without any extra force.
@gettindrunker4 жыл бұрын
Will a manual shirt lever from a regular 450 bolt up and function after this mod? Wasn’t sure how they were made
@TigerCreekFarm4 жыл бұрын
gettindrunker not really sure. I decided to go with a hand shift lever like this - kzbin.info/www/bejne/pWO4eX5qnLeIq9k
@gettindrunker4 жыл бұрын
Hey man quick question, I got this baby converted and I can’t get her to start now. No clue what I could’ve done. Acts like it’s in gear
@gettindrunker4 жыл бұрын
I figured it out. Guess common sense should’ve told me to make sure it was in neutral with the shift motor before gutting. She’s all manual now. Thanks a ton for the video brother!
@TigerCreekFarm4 жыл бұрын
gettindrunker been there done that. Glad it worked out for you and found the video useful.
@AlexDaGreat4202 жыл бұрын
I had my shift motor on and I couldn’t shift past 1st is this because of the shift motor? I have the shift motor off now going to replace because mine wouldn’t function. Any ideas? I’m chasin gremlins
@TigerCreekFarm2 жыл бұрын
There are so many things it can be. One part that can give you fits is the angle indicator(?) It lets the shift motor know where it is. You could also have a bad wire. You need to find a shop manual and go step by step to find the real problem. I got tired of chasing the continual problems and went manual shift.
@team2muddy3545 жыл бұрын
I have a foreman 500 2013 and the electric shift won’t do anything won’t click or nothing and on the emergency shaft it won’t let me go into reverse so I’m stuck on what to do
@TigerCreekFarm5 жыл бұрын
My .02 cents. Make sure the reverse button is being fully pushed when trying to shift into reverse Check the cable switch and the cable itself Check the battery charge (lot of ES shift problems are because of low battery) Check the engine oil level Check (replace) the angle sensor
@ryancecil67285 жыл бұрын
Team 2muddy mine done the same thing Change the shift motor and angle sensor
@bpm-pb6fy4 ай бұрын
Nutrition for 2002 Honda 354 wheeler
@bocherks3 жыл бұрын
When you put it together did you reconnect the wires?
@TigerCreekFarm3 жыл бұрын
Yes. Keeps them in place, clean and allows the gear indicator to work.
@Rougarou20233 жыл бұрын
Yes. Keeps water and mud out, and lets you know where you at gear wise
@RyanRedman3 жыл бұрын
Where do you get the lever for the manual shifting?
@TigerCreekFarm3 жыл бұрын
I made it - kzbin.info/www/bejne/pWO4eX5qnLeIq9k
@RyanRedman3 жыл бұрын
@@TigerCreekFarm Awesome! Super helpful. I'm still trying to find a dealer that will look at the ESP to see if I can get it to work, but have been struggling to do so. I appreciate the vids and your response.
@TigerCreekFarm3 жыл бұрын
Thanks
@KedneyContreras-cw5pt11 ай бұрын
Amazon
@AlexOrtiz-cz6fd3 жыл бұрын
Would this work on a rancher 350?
@Rougarou20233 жыл бұрын
just did it on my 2001 350! UY honda! and you ES-CRAP
@AlexOrtiz-cz6fd3 жыл бұрын
@@Rougarou2023 Thanks for the help!
@Blackford865 жыл бұрын
Looks like a windshield motor
@TigerCreekFarm5 жыл бұрын
Yes it does.
@richardgamez25683 жыл бұрын
I can put a electric shift 350cc change to a 420cc
@AlexOrtiz-cz6fd3 жыл бұрын
Would this work on a rancher 350?
@TigerCreekFarm3 жыл бұрын
I don’t know but my impression is that I don’t see why not.