Honda Rebel 1100 DCT // Saturday Break-In Ride (long ride vlog)

[@rbrowning008]

If your looking for a nice smooth ride on this bike I run mine in user mode and have it set to max power, max traction control, minimum engine brake, and lowest gear change. Its basically rain mode but with the power being there when you need it. Good gas mileage too because of the fast shifts during acceleration.

[@QuasiMotard]

Thanks for the tip! I'm just about to head out this morning on the Rebel, so I'll set those options and report back. Cheers! 👍 --QM

[@rbrowning008]

@@QuasiMotard Have fun. Those are my cruise around settings when im not looking to get into any trouble ;) . If I plan on going fast I just go into sport mode. If you don't mind having to be a little more active with manually upshifting, sport mode is a lot of fun.

[@MotoMuscleChick]

​@@QuasiMotardDid you ever do this? And if so what did you think about this suggestion?

[@QuasiMotard]

@@MotoMuscleChick Yes, I did it for the following day's work commute, and it worked out very well. I'm still riding with those custom settings as my normal ride mode. Cheers! 😉👍 --QM

[@yogid21]

I really love watching your video, it's so relaxing and very calm. You're not the typical bike reviewer/rider here in KZbin who always want to prove that their balls are big. We do have the same riding style, relax and wanna enjoy being outdoor. I hope you never fed up sharing your adventure, thank you and ride safe.

[@QuasiMotard]

Thanks for the feedback, Albert! I've done all of the go-fast crap that I needed in my younger days. I still have the speed gene and the need to twist the wrist, but I try to do that in more secure settings like race tracks or back roads. I don't condone hooligan riding or stunting on the streets, so I try not to promote that in my videos. That's not to say I don't ride/drive fast... I'm not a choir boy or a hypocrite... I'll visit the century club at least a few times per week. I prefer to ride slower and enjoy the scenery these days. If I don't need to get somewhere fast or on a deadline, then I'll take my smaller motorcycles or scooters every time. It's more entertaining to ride the small bikes, IMHO... I enjoy the minimalist challenge and the simplicity of the ride. Cheers! 😉👍 --QM

[@02155Tony]

Let us know how you make out with your fluid changes. You might want to list your custom parts as you move on. (mirrors,grips,seat pad) thanks for the honest video. You have me leaning more and more towards this bike. TY

[@stormchasingk9]

220 miles on a brand new bike you just bought, meanwhile the Super Cub I bought has 65 miles on it. I'm such a slow rider, lol.

[@gstreitenberger]

Can’t believe I watched the whole thing. Enjoyed it. Thanks for sharing.

[@QuasiMotard]

Glad you enjoyed it, and thanks for the feedback! I try to label the long (boring) vlogs as such, and I also put chapter markers in the videos so viewers can skip around as needed. Different strokes for different folks! Cheers! 😉👍 --QM

[@hunterh03]

Had the same issue with my cruise control once, but it hasn't happened since. Weird bug

[@maguilar51]

I just got my first bike a couple weeks ago. I fell asleep watching videos and I woke up to this video. And as I watched I was like hey that looks like Brookshire. Then I was like “hey!!!! It is Brookshire lol. I live in katy off of highland knolls and 99.

[@QuasiMotard]

Howdy, neighbor! 😉👍 --QM

[@guyallphin1295]

I got an Air Hawk seat cover. for the Trail 125 after i installed the Diablo seat. My ride is a lot more comfortable.

[@RandyLaheyJulian]

You live on westgreen!!!! Damn bro I live like 3 min from you haha I love your bike I’d like to see it in person

[@yvesmenoud4314]

With the wind you feel alive !!!

[@andregrastyan3403]

Why don't you ride it ever in the manual mode and use the paddle shift on the left for low speed cruising? This way it would not jump back and forth?

[@QuasiMotard]

My first few Rebel 1100 DCT videos were recorded during the break-in period. Honda recommends that you ride conservatively during the first 300 miles for proper engine break-in. I rode it in "standard" mode most of that time, and I tried to avoid full-throttle abuse (that was difficult). Now that it's out of the break-in period, I'll be riding it a little more flexible... more in "manual" and "sport" mode to find the best of both worlds. I'm also planning to do a few DCT performance and review videos to compare shift points for passing and full-throttle downshift speeds. Those should be interesting to see. Cheers! 👍 --QM

[@inea815]

This gotta be my next bike!!! I cant wait to sit on it. They dont have it in any dealership near me. I currently have a crf250l and my partner a ryker. So Im looking for a cruiser to tour with ny partner!! I loooooove the rebel. Hi from Beaumont, TX!

[@MotoMuscleChick]

I love your mirrors. What kind of mirrors are those?

[@QuasiMotard]

Thanks for the feedback! The bar-end mirrors are the CRG Hindsight LaneSplitter mirrors. You can see the installation video here: kzbin.info/www/bejne/i2ilmJqvasmcl68 . Product links for the CRG mirrors and bar-end adapters are in that video description. The center mirror that I have in my later videos is the RiderScan Blindspot Mirror: amzn.to/3nJjXLp . It really helps situational awareness in traffic. There is a learning curve to using it properly because the image is distorted by the mirror's convex shape, but it becomes second nature after a few hours of riding. It's very rare for me to be caught off-guard with a cager hiding in my blind spot while I'm riding with one of these mirrors. Cheers! 😉👍 --QM

[@MotoMuscleChick]

@@QuasiMotard i will definitely watch thx

[@RollWithSoul317]

Great video!!! I just want to know if you installed the handlebar mirrors or did you have them professionally installed?!? My understanding is they are a pain to screw in to the bars! Thanks. 🏍️💨 👍🏾

[@QuasiMotard]

Those are the CRG Hindsight LS (lane-splitter) mirrors. You can find the installation video here: kzbin.info/www/bejne/i2ilmJqvasmcl68 , and the product links are in the video description. I used a handful of stainless-steel flat washers as spacers behind the OEM bar weights to mount the CRG mirrors. It took a bit of trial and error, but they've been absolutely rock solid for 2+ years and 10K+ miles. Cheers! 😉👍 --QM

[@stevefjordan]

The bar end mirrors completely changes the look and feel of the rebel. In a good way. I know they're probably on back order, but the oem honda visor looks niiice. I find that sometimes the bigger the visor, it creates helmet buffering on the sides. I think i would need the bar risers. I have chronic back pain and leaning down causes havoc on me. Curious to see how that seat you're going to get works out. Thanks for my daily fix with the lengthy video. Watching the snow melt sloooowly. Lol😆😀🏍👍

[@QuasiMotard]

Thanks again for the feedback, Steve! I'll be sure to post updates on my bar riser and windscreen solutions ASAP. Keep thinking warm thoughts... it'll help the snow melt faster! 🤣👍 --QM

[@stevefjordan]

@@QuasiMotard got up to 10c (50f) here today. Snow is melting 😃🤣

[@QuasiMotard]

@@stevefjordan That's riding weather... as long as there aren't any ice patches! 👍 --QM

[@stevefjordan]

@@QuasiMotard The streak is over! After 153 days,finally got out today, went for couple hrs. Temp got to 17c (62f). Main roads were in good shape. Side roads still have some sand. I feel much better. Apparently we're getting a snow storm this weekend lol

[@QuasiMotard]

@@stevefjordan Nice! Congrats on getting out for some road therapy! I did the same thing this afternoon on the Rebel 1100... put down another 120 miles of saddle time on the new steed. 😉👍 --QM

[@donalds.griffin2913]

Check if your kick stand switch or rear brake switch are stuck. They inhibit cruise on the FJR

[@hunterh03]

I wondered about this also after it happened to me, but you should still be able to turn cruise on (but not engage) if your foot happens to be a little on the brake.

[@QuasiMotard]

@@hunterh03 Yep, I thought about that, too. The system failing to enable (main power) must be a software glitch. I haven't seen it happen again yet, but time will tell. 👍 --QM

[@jftuvell]

I just purchased the same bike. Thank you for the great on-the-road explanations of the bikes good and frustrating features. I don’t like the stock mirrors and those bar ends look great! What brand are they?

[@QuasiMotard]

Congrats on your new Rebel! Those are the CRG Hindsight Lane Splitter mirrors. You can watch my install video here: kzbin.info/www/bejne/i2ilmJqvasmcl68 . The part numbers and Amazon links are in the video description. You will need a handful of 5/16" stainless flat washers and a pair of slightly longer stainless 5mm hex cap bolts to install the mirrors on the factory bar-ends. Cheers! 👍 --QM

[@davestraight8219]

interesting it does the honda clonk into gear :D - hondas have been doing that for 20+ years lol

[@LegendofDarkend]

Can you link the bar end mirrors for your bike. I'm looking for some.

[@QuasiMotard]

Howdy! You can find the installation video here for the CRG Hindsight Lane-splitter mirrors: kzbin.info/www/bejne/i2ilmJqvasmcl68 . The product links are in the video description. I used some stainless-steel flat washers to space out the factory endcaps, and those are the mounts for the bar-end mirrors. Cheers! 😉👍 --QM

[@georgesienny7003]

Noticed you have taken the stickers off of your gas tank what was your process?

[@QuasiMotard]

The stickers are easy to remove while they are new (not dried out or sun-baked). I use plastic "spudgers" that are used for plastic trim removal and vinyl wrap smoothing, but you can do the same thing with a plastic credit card. Just use the edge of the credit card to lift up a corner of the sticker(s) and then peel them off with your fingers. It helps to hold the credit card at a very shallow angle to scrape across the edge of the stickers to lift it up easier. If any adhesive residue is left behind, then you can use WD-40 or GooGone to dissolve that easily. Cheers! 👍 --QM

[@cstephenson9223]

Man I want one of these so bad and I have a grom but need something a little faster for highways and such👍 always loved the way Honda does bikes had a pcx125 and a 2014 interceptor 800👍👍

[@Ski-bd1rq]

Cant see you riding the Newley purchased trail after this purchase.

[@QuasiMotard]

LOL! Funny that you mentioned the CT125, because I just took it out for a 4-day moto-camping trip! It wasn't a long-distance trip, but we had fun. Cheers! 👍 --QM

[@kouvang9756]

Have you practice slow speed and U-turns on the DCT yet? If so, can you give me some tips? Or even better, make a video on it. Thanks.

[@QuasiMotard]

I've done some slow u-turns and figure-8's with it to get acclimated to the DCT. I'm no expert with the DCT yet, but I've found that it helps to drag the rear brake slightly to maintain steady power with the throttle. The DCT can make slow maneuvers a little tricky when it clutches unexpectedly, but I'm not bothered by it too much. I'll try to make a few videos about low-speed maneuvers, but you should check out Kevin Morris's channel, "MCrider" ( @kevinmorris22 , kzbin.info ) for some expert guidance. He has a good review video here about his Gold Wing's DCT: kzbin.info/www/bejne/aIConqaInM6XrK8 . The Gold Wing is obviously a different animal because of its size and weight, but the points that he mentions about the DCT are on-topic for the Rebel DCT. Cheers! 👍 --QM

[@kouvang9756]

@@QuasiMotard Thanks Buddy.

[@georgehouston6327]

@@QuasiMotard I had a 2016 Honda CTX 700 DCT and also discovered that dragging the brake is the way to perform slow speed maneuvers.

[@Storm-mt1ky]

I just bought mine today. How do I get my mirrors to be like yours?

[@QuasiMotard]

You can watch my install video here: kzbin.info/www/bejne/i2ilmJqvasmcl68 . The part numbers and Amazon links are in the video description. You will need a handful of 5/16" stainless flat washers and a pair of slightly longer stainless 5mm hex cap bolts to install the mirrors on the factory bar-ends. Cheers! 👍 --QM

[@thereeds0612]

How tall are you? I'm 5'10" and worry having my legs at almost 90° will kill my bad knee. I've day on them but still worry about long rides. It's it still a comfortable ride?

[@QuasiMotard]

I'm about 5' 7" with a 29-30" inseam. You should fit ok on the Rebel 1100, but the leg position can be tiring for longer rides. The footpeg and tank position force your legs outward, so hip flexor can take a beating after a few hours. I plan to install a footpeg relocation kit (forward controls) and some small floorboards to give me some flexibility on foot placement. Cheers! 😉👍 --QM

[@swaggalaggaz4918]

would you suggest this bike to be for beginners as their first bike?

[@QuasiMotard]

The Rebel 1100 is a powerful and somewhat heavy bike for a true beginner, but it shouldn't be too daunting for someone with a bit of riding experience. The motor has LOTS of torque, so it can be a bit intimidating if you grab too much throttle. Setting the bike in "rain" or "custom" ride mode with reduced engine power does help with the throttle response. The overall HP doesn't change much, but the throttle map makes the engine more tractable, and the traction control intervenes more aggressively. Cheers! 😉👍 --QM

[@breece37]

What the name brand of set pad your using.?

[@QuasiMotard]

Howdy, Boyd! That's the AirHawk Cruiser Large: amzn.to/3Ll1Dod . I have a couple of these that I swap around on my different bikes and scoots. They just strap around the original seat... only 1 minute to put on and 10 seconds to take off. I couldn't have done several of my recent cross-country rides without the AirHawk, that's a certainty! 😉👍 --QM

[@johnbrouusard1182]

I was looking into the rebel for a beginner bike. Seems like a nice ride. I'm not sure if it would fit me comfortable. I'm 5'11. Great video.

[@QuasiMotard]

Thanks for the feedback! I'm not sure how taller riders will find the ergonomics on the Rebel 1100. I've had a few comments from taller riders (6'2" ish) that said it was too cramped. I'm sure that the aftermarket will have upgrades for the footpegs and extended "forward controls" to stretch out the legs a bit. I'm 5'7" and 170 pounds... I'm reasonably comfortable on my Rebel, but I will be adding some setback handlebar risers to give me another inch or so of reach to the bars (not leaned forward so far). My knee and hip position is good, but adding highway pegs or some floorboards might be an option for more leg/foot flexibility. A windscreen is also a must for my long highway rides... the seating position puts a lot of wind pressure on my chest at 70 MPH. Good luck shopping, and getting in to motorcycling! Cheers! 👍 --QM

[@rogerwilliams2629]

If you are ever going thru Conroe I'd be happy to buy you dinner. I'm learning a lot about this bike which is a major contender in my search.

[@QuasiMotard]

Thanks for the feedback and th meet-up offer, Roger! I'll let you know in advance the next time I'm planning to ride up to your area. I usually motocamp in the Sam Houston Forest area a few times each year, and I'll certainly be up there later this fall. Cheers! 😉👍 --QM

[@rogerwilliams2629]

@@QuasiMotard sounds great if you dont mind questions and me ogling your bike!!! Really enjoy the vids. O e thing I'm very interested in from you specifically, is how it handles these horrible roads with tar snakes,pot holes, uneven grades, etc. I havent ridden in 42 years!! LOL

[@QuasiMotard]

@@rogerwilliams2629 LOL... no worries! The Rebel 1100 handles quite well for a cruiser. The cornering angle is very good and then handling is more like a standard/naked bike than a cruiser... it doesn't tend to drag hard parts unless you really try to ride it like a sport bike. The only shortfall is the rear suspension compliance being too harsh for my preferences. I've adjusted the rear spring preload to minimize the bottoming-out, and that has helped tremendously. Otherwise, the Rebel is very smooth on the highway and it handles road grooves and crappy roads surprisingly well. It's also very stable in cross winds due to the relatively heavy weight (~510 pounds) and the lack of large plastic panels & fairings to give the wind something to push against. I will be installing a mid-sized windscreen on it and taking it out for some roadtrips & motocamping very soon! Cheers! 😉👍 --QM

[@rogerwilliams2629]

@@QuasiMotard THANKS FOR THAT !!!

[@vietvo6215]

So would you prefer the ryker 900? Or the 1100? For Houston?

[@QuasiMotard]

That's a tough question... it really depends on your riding or commuting chores. If you spend a lot of time in stop-and-go traffic, then the Ryker is hard to beat because there is no balancing, clutch-slipping, or shifting gears. However, if you spend more time moving at decent speeds, the Rebel 1100 definitely rides better and returns better fuel economy (the Ryker is a pig at ~29-30 MPG, while the Rebel 1100 gets ~42-46 MPG). 👍 --QM

[@澤芹]

What brand is the left hand circle display?

[@guyallphin1295]

This is a fun ride! Thanks

[@khiemtran7226]

Hi, did you find out why your gas tank is shaking?

[@QuasiMotard]

I haven't torn into my bike yet to see if anything is loose. However, several other Rebel 1100 owners have replied to me advising that their tanks are also loose (maybe not quite as loose as mine). So, it appears to be a design intention by Honda... maybe to avoid shaking the tank and causing agitation of the fuel? I'll keep everyone updated on what I find out. 👍 --QM

[@xhuynh23]

What is that circular GPS on your bar? What's the name/brand please? I'm trying to find it

[@QuasiMotard]

That's the Beeline Moto GPS ( ridebeeline.refr.cc/aaronb ). You can watch my first video on it here: kzbin.info/www/bejne/maGknIupfLeUm7s . The video description has details about how it works. Cheers! 👍 --QM

[@Stifford123]

youve been driving with your high beam on a lot bud. that purple light means turn em to dipped 8)

[@QuasiMotard]

Nope... you must not be from the USA! 😉 That is a common and recommended practice (taught in MSF courses and listed in the course curriculum) here in the States. Our cagers are very careless and not trained to look for motorcyclists, so smart riders ALWAYS ride with their high beams on during the daytime. We dip to low beams at dusk and dark to avoid blinding oncoming traffic. --QM

[@TheThagerty]

Why Honda has not added you to their influencer payroll? I will never know. Do to your videos we have purchased both a Navi and adv150 and about to get a rebel 1100

[@SONofLIBERTY]

What are you using for audio during your motovlog?

[@QuasiMotard]

My helmet and microphone setup can be seen in this video: kzbin.info/www/bejne/epDPk6CCmcqhfrc . I use the GoPro Hero7 Black camera mounted in a Ulanzi Vlogging case on a MotoRadds helmet chin mount. The microphone is one from an old Cardo Scala G9 kit that was left over from an upgrade; that is plugged into the camera via the GoPro audio adapter. Here are links to the equipment used in my vlogging setup: GoPro Hero7 Black: amzn.to/33GRX3m GoPro Hero5+ audio adapter: amzn.to/36LpUBO Purple Panda microphone: amzn.to/34zLNkB MotoRadds GoPro helmet chin mount: amzn.to/3jCAz5f Ulanzi V2 GoPro vlogging case: amzn.to/3lq62Ih CLEAREX lens protector: amzn.to/2GJ2F06 GoPro J-hook buckle mount: amzn.to/2IjuCMM Cheers! 👍 --QM

[@Tkh21209]

What do you use for your live videos?

[@QuasiMotard]

Are you asking about the video equipment for my live streams, or this gear in this particular ride video? My normal helmet camera that I use for these vlogs is a GoPro Hero 7 Black. My live stream camera varies, but it's usually a GoPro Hero 8 Black connected to an Elgato CamLink 4K capture card that feeds into my editing/streaming station. I can send all of the details by email if you're interested... just send a request to [e-mail]. Cheers! 😉👍 --QM

[@Tkh21209]

@@QuasiMotard ok e-mailed I got a go oro 7 but thinking about getting a 8 instead for the media mod

[@Storm-mt1ky]

hows that seat pad working out for you?

[@QuasiMotard]

The Air Hawk is doing very well so far! I haven't done any LONG rides yet, but I was in the saddle for about 2 hours on this ride. I'm expecting my Honda accessory seat to arrive later this week, so I'll be sure to do a comparison video ASAP. Cheers! 👍 --QM

[@feloniousmonk3049]

142.2 miles / 2.968 gallons = 47.91 MPG on this tankful. 3.6 gallon capacity.

[@NanaRides]

Cannot really call it a "glitch" once you've changed parts from OEM, since it could be your mods that cause the glitch, right?

[@QuasiMotard]

This bike was 100% stock with no mechanical or electronic changes when I recorded this video. The cruise control glitch became a well-known issue with these bikes, and it was caused by the rear brake switch "floating" under moderate pedal pressure (rapid on/off state, more than 10 events in 2 seconds). The ECU read that as an error condition and completely disabled the cruise control until the system was reset (power off/on). Honda was advised of the problem and didn't have any resolution other than adjusting the brake switch to prevent the switch float. --QM

[@Sean-yk2cf]

Do you think a windscreen is necessary for this bike?

[@QuasiMotard]

I wouldn't say that a windscreen is absolutely necessary, but it depends on your riding habits. The wind pressure on your chest is very tiring at freeway speeds... you're fighting just to hang on above 70 MPH. Even a small windscreen will break up the wind pressure across your chest, so the ride (particularly long rides) will be more enjoyable. 👍 --QM

[@petersonppmetaldetecting]

Good job man👍👍👍

[@phillipdavies6535]

You need to ride sport 2 or 3, better still manuel. Great sound, love the bike

[@QuasiMotard]

The Rebel DCT doesn't have all of the ride modes that the AT has (e.g., Sport 2/3). The "custom" mode lets us set several of the paramaters independently, but there is only one custom preset. Manual mode isn't bad, but that's really defeating the purpose of the DCT. There is still a significant lag when using the manual shift mode, and you can't control the clutch siip. It's better to get the manual/standard version if that's your preference. --QM

[@phillipdavies6535]

@@QuasiMotard You say what you like I had one, and it had sport 123, period, don't argue I know my bike

[@QuasiMotard]

Sorry, I guess I don't understand the point you're making. The Rebel 1100 only has one factory "sport" setting. We can adjust the singular "custom" mode for different throttle response, traction control, engine braking, and DCT shift settings. So, we have a total of 4 ride modes on the Rebel DCT: sport, standard, rain, and custom. --QM

[@trailblazeratv6306]

I think it sounds like a Nascar sometimes

[@Stifford123]

ah,, ok, its an offence to do it here in uk.. Or at least cops will pull you over for it. thx . keep up the good vids bud !

[@QuasiMotard]

Thanks 👍 --QM

[@dylanjustin2520]

❤️❤️❤️❤️😁😄

[@Darkrider8500]

I wish people would stop putting bar end mirrors on

[@QuasiMotard]

Why?

[@Darkrider8500]

@@QuasiMotard mirrors that are above the handle bars can be seen better than bar end bars. Good example I’d function over appearance People put bar ends on for appearance and ignore that they reduce vision

[@QuasiMotard]

@@Darkrider8500 That's a valid point, but the net effectiveness of bar-end mirrors really depends on their angle of incidence vs. the stock mirrors. For example, the OEM mirrors on my Honda Super Cub were nearly useless because their placement was too narrow and they only provided a clear view of my own torso and shoulders. Trying to use them was actually a safety hazard due to the constant shifting of arm and body position to see threats in the mirrors... too much time lost focusing rearward instead of forward and to the periphery. I replaced them with the CRG LS mirrors, which moved them out to the edges of the bike and resolved the visibility problem. These CRG mirrors (same units are installed on my Rebel) have optically-correct parabolic glass which provide a much wider field of view than OEM mirrors. The Rebel's bars are high enough relative to my eyeline, so these mirrors are still within my peripheral view. Increased visibility over the OEM mirrors was my goal, and these serve me very well in Houston's dense traffic. --QM

[@rickbescoe9952]

I'll say it for all those waiting to get gas, and for the owner of the service station, when you're done fueling up, pull away from the pump to finish your business...geez!

[@QuasiMotard]

Are you referring to me getting out of the way? I was watching for new patrons and even mentioned getting out of the way. --QM

[@michaelosullivan1024]

Ah with you

[@michaelosullivan1024]

Truth can't be stopt

[@abnerruiz4011]

The thumbnail had 69 as the speedometer ngl.

[@QuasiMotard]

🤣 It's always doing that or "666", which I try to avoid. 😉👍 --QM

[@michaelosullivan1024]

Ah thanks for tutiale

[@ArtyYeo]

Thanks for sharing your experiences. Any issue with the front single disc brake? Is it sufficient so far?

[@QuasiMotard]

The front brake is plenty strong to stop the bike, and it modulates well. However, the lever is a bit mushy/squishy for my preferences. I will probably upgrade the front brake line to a stainless-braided line sometime in the future to see if I can firm-up the feel at the lever. Cheers! 👍 --QM

[@SONofLIBERTY]

The front disc is enough but I feel the rear brake could a been better executed. However both are really good at stopping when needed. The bikes overall weight is what allows Honda to get away with the single disc brake on the front for sure