Step by step installation guide of the Outback Motortek Honda XL 750 Transalp crash bars.
Пікірлер: 41
@Alex-cf8ux8 ай бұрын
Just installed mine, great product thanks!!
@Outbackmotortek8 ай бұрын
Thank you for your support!
@GregLanz6 ай бұрын
My kit just arrived today. A foot of snow on the ground in Canada so have a bit of time but I should be starting tomorrow. Looks pretty straight forward thanks!
@Outbackmotortek6 ай бұрын
Thanks for your support!
@someguy50356 ай бұрын
You are going to likely have hardware issues. Test fit the nylock nut on the frame through bolt before you start. The nut is the wrong TPI. Won't even turn two full rotations. Also, the forward plate mounting bolts are the wrong TPI as well. Two turns and then dead stop.
@mindofmonster5 ай бұрын
This thing fits like a glove and because of that it can be tricky. Very well made. Thanks guys!
@Outbackmotortek5 ай бұрын
We appreciate your feedback and compliments
@JoeTylka7 ай бұрын
Wish you guys would’ve included instructions on this install. Had to watch this video a few times!
@Outbackmotortek7 ай бұрын
We stopped supplying printed instructions years ago. Ever since we switched to videos only the amount of calls and emails regarding certain steps and troubleshooting tips reduced tenfold. Videos include a ton more details, hence we and our customers (generally) prefer them. Thank you for your understanding
@someguy50356 ай бұрын
Same, they just gloss over the bracket part, which is the most detail-critical part of the installation process. Took me forever to figure out how the brackets all went together. Also trying to figure out why they used round hex cap bolts in a location where that is probably the worst possible choice for that kind of fastener.
@kristianline3034Ай бұрын
Great looking kit, much better thank OEM! Is it possible to remove the fairings on the side without removing the crash bars first?
@OutbackmotortekАй бұрын
@@kristianline3034 the fairings can be removed, but it’s a tight “squeeze”
@xujinxing Жыл бұрын
nice guide, what is the weight of these crash bars
@Passinthru Жыл бұрын
Waiting to get word the TransAlp I ordered to be shipped in Southern California. Need these bars! Excellent design.
@Outbackmotortek Жыл бұрын
Thanks! Hopefully you’ll get your Transalp soon. We just picked up one of the first ones in Canada (BC).
@Passinthru Жыл бұрын
Will your team be creating a GPS mount somewhat like SW Motec is offering please? Thanks
@Outbackmotortek Жыл бұрын
@@Passinthru we might! There’s also tail tidy and high fender conversion kit on the agenda
@michaelleiss784424 күн бұрын
Can you take of the vender left and right with the crashbars on ? GreetingMike
@NewGoPruductions6 ай бұрын
any idea when it will be on stock again in Belgium? looks great btw!
@Outbackmotortek6 ай бұрын
More or less about a week after Easter. Thanks
@adamkemerer912011 ай бұрын
Nice guide, do you know of these work with the OEM engine gaurd/skid plate from Honda?
@solulogic29 күн бұрын
Did we need to remove the bar each time we checks the air filter when we remove the side panel ?
@Outbackmotortek29 күн бұрын
@@solulogic not necessarily no
@mindofmonster5 ай бұрын
Now my small bracket is hitting the horn before getting to cross brace. I think some paper instructions along with video would help. Rewinding a million times gets old.
@Outbackmotortek5 ай бұрын
Thank you for your input. Installing these products is very complex and paper based instructions simply cannot contain enough details to complete the job. We had paper manuals for years. The horn is easy to adjust.
@mindofmonster5 ай бұрын
Finally got it. You have to kind of push it up and slide it over so that notch slides over horn corner. It fits, just gotta be patient.
@Fishingalive Жыл бұрын
Cuando volveran a tener stock?
@irarabesc4 ай бұрын
what torque has to be used at 6:19 to tighten the upper cross brace? there are two bolts and when I tighten one of them the other becomes loose and vive versa
@Outbackmotortek4 ай бұрын
Those are M8 bolts with 23Nm torque spec
@someguy50356 ай бұрын
What exactly is happening from 2:57 through 3:24? I can't tell and I have all this stuff sitting in front of me right now. You jump around and are clearly using a bracket, yet you only mention "do one side at a time" while attaching multiple things and bolts. And you jump from the left side to the right side. Also at 3:47, you mentionm a nylock nut and washer. I don't have any extra. They every nut and washer came attached to a bolt in the bag. Where is this nut and washer supposed to come from?
@Outbackmotortek6 ай бұрын
From around 2:50 until 3:10 we remove the front LHS small through bolt and then the long rear through bolt. Hence we go from one side to another. In case you’re missing any hardware we’ll be happy to send replacements free of charge. We apologize for the inconvenience!
@someguy50356 ай бұрын
@@Outbackmotortek I don't understand why you guys don't show the lower bracket orientation in the video. It can be installed both upside down and backwards. You have a 1 in 4 chance of getting it right the first time. Why not mark it U/D and L/R? Also, the smaller connecting brackets are side specific too. You don't mention any of that in the video. You don't even show it. You just gloss over the part that would benefit from some detail. Even labeling the small brackets R and L would save people time. No one wants to be laying on the ground playing the parts guess lottery on which parts go on which side. For the life of me I can't figure out why you randomly decided to use round hex cap screws in only 2 places....places where round hex cap screws are a giant pain to get to. Why not just make all the hardware the same format? A standard bolt would make the most sense considering a socket would be the easiest to tighten in that location.
@Outbackmotortek6 ай бұрын
@@someguy5035 what you’re referring is shown and explained from 0:40. We have always supplied different hardware for different spots. Let us know if you have any more questions! Thanks
@rickhadfield10977 ай бұрын
Why no engine protection built into the bars?
@Outbackmotortek7 ай бұрын
We have a skid plate instead with high sidewall coverage simply because there are no mounting points in the lower half of the bike. We prefer not to bolt crash bars on the engine. Our skid plate is frame and crash bars mounted, thus it avoids putting any load on the engine under impact
@mindofmonster5 ай бұрын
I don't see how anyone is getting the left side on. The hose is too tight and the horn is in the way when you try to shift it. What am I missing?
@mindofmonster5 ай бұрын
I finally got it on with weird contortion moves. It was tight!
@Outbackmotortek5 ай бұрын
@@mindofmonster yes, it’s a tight spot, but it’s an essential mounting point to utilize
@KairyuRider Жыл бұрын
What is the weight for these?
@Outbackmotortek Жыл бұрын
5.5kg/12lbs
@KairyuRider Жыл бұрын
@@Outbackmotortek Thanks, I'll ask santa right away