Hoover Washing Machine E08 Error Code - How to Fix!

[@russellg3775]

Excellent video, very clear, many thanks. As per other commenters, the problem was the brushes were a bit clogged up - no need for a new motor!! I just undid the 2 screws holding each one in, cleaned them up with a brush and reinserted - very quick and easy. Washing machine is good as new. Already had 10 years out of it and this was the first fault.

[@eSpares]

Hi, thanks for your comment here and for sharing that it was only the brushes being blocked that was your problem. Hopefully your washing machine continues to work great now.

[@davidbennett1316]

thanks for posting the video - I had the E8 code and checked the motor - found one of the brushes was sticking and hence not making proper contact with the armature. cleaned it up and a little bit of WD40 and now everything working fine. my message is E8 code will be a motor problem but will not necessarily require a new motor (which cost c.£140)

[@SuffolkBear]

Many thanks for this suggestion. I also gave my motor a spray-up (with GT85) and got it working again.

[@russellg3775]

thanks for the tip-off, that was the problem for me, just an accumulation of brush dust. A quick clean and good as new.

[@stephensantoliquido5350]

Or just replace the brushes??

[@danandlaundry]

My one kept giving me E08 on the activeco 20 cycle yet it does a spin only with no issue

[@michaelminers2612]

Oddly, I followed the link but you don't sell a motor for this machine

[@openBSDguru]

dont i need to "screw" the motor back?

[@VladimirRusu-dg1lk]

Thank you

[@eSpares]

Hi, thanks for your comment, hopefully our video has helped you to fix the error code on your washing machine now!

[@MersihaNurkic]

Pokazuje E03 kod molim za pomoc

[@ivanarusec4052]

Zastopao se filter

[@notcoinuzbmilioneri]

Bompani E05 code error что мне делать помогите пожалуйста