WALL MOUNTED pressure washer! Super clean and FUNCTIONAL! AR Blue Clean 630 TSS Setup!

[@HorsePowerObsessed]

Part 2 of the garage update! You can find all the parts for the custom pressure washer setup here: AR Blue Clean 630 pressure washer: amzn.to/2Xct7Ux MTM SGS28 gun and foam cannon: amzn.to/2Toyqiw MTM Hydro 100ft hose: amzn.to/3d4poio MTM Stainless quick connects: amzn.to/2LJr1WL Cox Reels 100ft hose reel: amzn.to/2YZqR5o MTM 2ft jumper hose: amzn.to/3cxubsE No Spots Pro spotsless wash tank: amzn.to/3e4SDlc Milwaukee Right Angle Drill Attachment: amzn.to/3ejmI0y

[@Rad1oD3mon]

Thank you for the NSP link, very much appreciated! Do you have a link to the stainless connectors you used for your NSP?

[@laytonrowan9172]

You prolly dont give a damn but does someone know a way to get back into an Instagram account? I was stupid lost my password. I appreciate any help you can give me!

[@zionmayson635]

@Layton Rowan instablaster ;)

[@laytonrowan9172]

@Zion Mayson thanks for your reply. I found the site through google and I'm in the hacking process now. Takes a while so I will reply here later when my account password hopefully is recovered.

[@laytonrowan9172]

@Zion Mayson it worked and I finally got access to my account again. I'm so happy:D Thanks so much you really help me out!

[@BlackoutTinting]

Ah nice, you went with Blackout Gray for the walls.. Looks Good! And thanks for the help with our pressure washer.

[@HorsePowerObsessed]

I actually asked for "Blackout Gray" at Sherwin-Williams and they knew exactly what I meant! You're very welcome, it's a beastly setup!

[@HawaiiDetailing]

Nice setup. I like it a lot. I did a similar install on my channel. I like awesome garage setups.

[@HorsePowerObsessed]

Definitely! I have a lot more planned for my garage so stay tuned!

[@troyhenry3267]

Does the No spots Pro really do a good job of minimizing hard water spotting?? How soon before you have to replace resin?? Do you only use it for final rinse?

[@HorsePowerObsessed]

I only use it for final rinses and it does a great job.

[@RADGarage]

Awesome video! I’m currently installing my AR 630 TSS in my garage and this was very helpful. Cheers.

[@HorsePowerObsessed]

Glad it helped! LOVE this setup!

[@26-CJ]

@@HorsePowerObsessedis there another video since this says part 2

[@laoboy316]

Where did you get the Stainless steel shelf at ?

[@colemcmeans7809]

looks great, wish I could even entertain the idea of a garage remodel. mines decorated with parts and tools so not so bad

[@HorsePowerObsessed]

Thanks, man. I know it's not for everyone but I'm too OCD to have it any other way.

[@colemcmeans7809]

@@HorsePowerObsessed wish I could just out of room and it's all good stuff... I need a small warehouse.

[@nikhil7229]

I’m planning on making a build very similar to this with just the hose reel and pressure washer. I’m planning on using the Karcher 1700 cube, what are the connections needed for the Hose to washer, Washer to jumper hose, and Hose to gun? Are all of the connections already provided when I order parts? Thanks.

[@bfilz]

Insane brotha....Love the set up!

[@HorsePowerObsessed]

Thank you! It's insanely functional as well as beautiful 😍

[@roger2115]

Nice setup..... can a quick disconnect be connected to the reel swivel inside the reel to connect the pressure washer hose faster?

[@cmd_76]

Setup looks great bud. Nicely done 👍

[@HorsePowerObsessed]

Thanks, man! Hugely functional, too!

[@cmd_76]

For sure. Can't go wrong with what u have done. Looks sweet 👍

[@HorsePowerObsessed]

Thank you!

[@gary9879]

Thank you for the info. I’m looking at the same AR pressure washer and it states it’s 14”x14” x20” online.....surprised you can get by with an 8”x16” shelf?

[@fillflashdetailer8838]

Yeah, that 14x14x20 measurement is not correct. This unit easily fits on an 8x16 shelf.

[@Yielar1]

Which nozzles did you go with for the AR Blue Clean 630 for car washing?

[@HorsePowerObsessed]

I use a 4.0 orifice nozzle to have the pressure right around 900 psi which is perfect for washing a car.

[@evanrenk7785]

Can you send the links of the stainless hose running from the spot pro to the pressure washer, and the stainless shelf? Nice video!!

[@HorsePowerObsessed]

Absolutely! The hoses you can get here: amzn.to/36A8vK5 and shelf can be purchased from here: bit.ly/3d8Im7F 8x16.

[@gary9879]

@@HorsePowerObsessed what size shelf is it....how deep?

[@04sti20]

Those toggle anchors hold the reel with the hose and water no issuse ? And also the pressure washer wrights over 50 lbs.

[@HorsePowerObsessed]

Correct. Each toggle holds 200+ pounds. It’s been over a year without any issue.

[@codyspencer3491]

Not OG spec but close. Nice setup.

[@HorsePowerObsessed]

You're right. It's HPOG spec! 🤘😎🤘

[@jermanehoowse4618]

Yeah not OG spec. This guy seems like he actually does work himself.

[@troyhenry3267]

Can you do a video on exactly how you have your hoses connected to the No Spots Pro unit and what you have to do in order to use filtered water vs. Tap water???? Thankyou!!

[@HorsePowerObsessed]

I plan on doing an update video on this whole setup soon. Stay tuned.

[@26-CJ]

⁠Can I ask if you can give me a link to the fittings you used on the spigot. 1. The Y valve 2. The fittings that are on both sides of the Y valve 3. The stainless steel hoses you used from Y valve to the deionizer. You seem to have custom lengths. How can we get the different sizes you have. Last question. Do the quick connects on the spigot leak at all. Obviously you used pipe tape on the threads. My question is in the quick connect fitting. Do you get a tight seal there? Thank you for the info in advance.

[@austinstroot9910]

What other DI system would you recommend, the one you mention and link is no longer available on Amazon! Great video, love the detail oriented OCD type stuff, I can definitely relate

[@HorsePowerObsessed]

Thank you. I'm assuming it will come back in stock soon but other than that one the only other system I'd recommend is a lot more pricey. If you're interested it's this one here: amzn.to/3g5hQQU

[@jermanehoowse4618]

OCD has nothing to do with being detail oriented. Just saying.

[@brenthobby3282]

Looks like someone has been following Matt Moreman haha

[@HorsePowerObsessed]

Yes and no. The only part on my setup that is the same as his is the reel and shelf. The rest is all mine.

[@briankapp5827]

Did you get the shelf from Obsessed Garage? Is the reel retractable or manual only? Thank you for the link to the video. Looks great!

[@JS-mr2ei]

The only thing missing is the Kranzle K1322TS.

[@HorsePowerObsessed]

I found through personal testing that the price difference wasn't warranted. The AR is a beastly pressure washer.

[@jermanehoowse4618]

Why pay hundreds more for same performance? Actually less since 1322 does not have hot water function

[@FlashTechEngineering]

Hi bro 6.55 teflon tape you were going in the wrong direction .. unless it was a left hand fitting..

[@joshcosta423]

I just watched this and thought the SAME thing. He did it a backwards wrap

[@FlashTechEngineering]

Leaky leaky 😂

[@troyhenry3267]

I have a question. BTW, great how to video. Since I don't have a spigot in my garage I will have to run my garden hose from side of house to the No spot canister. Do you have a way that would be the easiest to do this connection? I want the ability to switch between tap water and switching to deionized water when I go to rinsing my vehicle. Any advice appreciated

[@HorsePowerObsessed]

Thank you. The no spots pro can be attached directly to a garden hose. Does your garden hose end with a female or male connection?

[@troyhenry3267]

@@HorsePowerObsessed it will have a QD coupler on it

[@troyhenry3267]

I'm going to get a estimate from plumber to see how much it would be to have a water spigot installed on the inside of my garage. I would very much rather connect into a water supply just underneath my press washer setup than to have to connect a garden hose to the side of my house then connect it to my press. Washer.

[@troyhenry3267]

Do you have link for the y splitter valve going into the No spot unit?

[@patcap535]

Question are the toggle bolts the only thing holding the he pressure washer and Cox reel? No backing board?

[@HorsePowerObsessed]

Correct. The toggle bolts will hold 200 pounds.

[@patcap535]

@@HorsePowerObsessed thanks

[@HorsePowerObsessed]

You’re very welcome

[@patzimaro1]

How have those toggle bolts been holding up on drywall for you so far? Have you noticed any looseness or any other issues? Thanks

[@HorsePowerObsessed]

Absolutely perfectly. No issues at all.

[@hfjeff2736]

This is a very clean, neat install. I was wondering the same thing. There is a lot of weight with the pressure washer, hose reel, and hose full of water all in one concentrated area. I mounted a 1/4 sheet of 3/4" plywood with T-nuts for the hose reel. HorsePower, thanks for posting all the materials you used for whips and quick connects. It will help me finish my setup.

[@stevegrimes5105]

Nice, clean installation. Does the AR630 stay in place? No need to screw it to the shelf?

[@HorsePowerObsessed]

Thank you. Yes, it stays in place. It has small rubber feet that keeps it in pace and keeps the vibration down.

[@michaelanthony4491]

Where did you find that stainless shelf unit. Did not see in your list. Thanks Mike

[@HorsePowerObsessed]

I got it here: www.stainlesssupply.com/stainless-kitchen-products/docs/stainless-fixed-shelving.php?fbclid=IwAR1CO-fOonvLMh88aokDj0IEBIL29RA1XuSWYZU7-ftdKSEc8YeHrssPyaA

[@M6_1LE]

Have you had any issues mounting the hose reel with drywall anchors?

[@HorsePowerObsessed]

Zero issues. I plan on making an update video soon talking about how everything has held up.

[@nismonad88]

Very nice, Can I know what adapter and/or quick connects you putted on the inlet hose to the inlet in the machine ?

[@HorsePowerObsessed]

Absolutely. I used these: amzn.to/3G34HBJ

[@nismonad88]

@@HorsePowerObsessed no adapter ? Looks like a female hose

[@ajbrown2013]

I would have put some rubber backing pad behind the reel on the wall and the brackets to reduce any vibration noise.

[@HorsePowerObsessed]

That's not a bad idea! 🤔

[@damienhealy6850]

I love this set up. Very neat install. I’m especially interested in the braided feeder hose with the right angle connect that connects to the pressure washer. Could you give us a link to where you got that? I don’t think it’s in your purchased list. Thanks so much!

[@HorsePowerObsessed]

Thank you! Yes, here's the link to the right angle hose set: amzn.to/3FwgEjV

[@damienhealy6850]

@@HorsePowerObsessed Thank you so much for the fast response!

[@26-CJ]

@@HorsePowerObsessedIt seems as if these are nickel plated fittings on the hoses. Are there any stainless steel hoses that have stainless steel fittings on them? If not won’t they corrode.

[@thomaskehoe5716]

What gun and wand would you recommend for someone purchasing the AR Blue Clean 630 pressure washer without the gun and wand? Looking into copying this setup for my garage

[@HorsePowerObsessed]

This is the one I use and it’s fantastic! amzn.to/3EFpjAj

[@thomaskehoe5716]

@@HorsePowerObsessed thank you for such a quick reply!

[@HorsePowerObsessed]

You’re very welcome! I’m super passionate about this setup so I’m happy to help!

[@thomaskehoe5716]

Hey, I’m having some trouble on the setup with the quick connects. I ordered the mtm quick connects you had linked, but it was only 1 quick connect and 3 male fittings. I’m still missing a quick connect for the blue clean output (male quick connect), a quick connect female for jumper hose to at blue clean and a quick connect from the hose to the gun. Would you be able to help me out on which connection package to buy with all the correct quick connects/ fittings

[@thomaskehoe5716]

What is the fitting called at “15:50” on the video. It is needed at the end of the 2’ jumper to the at blue clean and at the end for the gun attachment? Can you please link that, it wasn’t in the quick connect pieces under description.

[@HorsePowerObsessed]

It's the quick connect here: amzn.to/38RpEVa

[@thomaskehoe5716]

@@HorsePowerObsessed Thank you so much! Last piece i need to complete this setup and get it working!

[@HorsePowerObsessed]

Heck yeah! You’re gonna love it!

[@tannercorwin1001]

Nice setup! Have you had any issues w leaking over time? I would like to do a similar setup but hide the unit inside a cabinet. Thx!

[@HorsePowerObsessed]

So far no leaking! If it does (which it will eventually) you need to replace the rubber gaskets in the quick disconnects (very cheap/easy).

[@jamesthibautii5341]

Where did you get the Stainess steel shelf for the pressure washer? I don't see it on the list

[@HorsePowerObsessed]

You can get them custom sized here: bit.ly/3SCJMv6

[@smote911]

Was researching this pressure washer and came across your channel and subscribed. I really appreciate the detailed, step by step method you showed in setting this up. I think you may have won me over to this system. Did you have water spigot installed in garage or was it there when you bought house. I don't have one in my garage but can see how much neater, cleaner and easier that would make it. Thanks again! I'm a Porsche gal but your Vette is nice!

[@HorsePowerObsessed]

The water supply was there but I swapped out the old leaky spigot for a new one before setting all this up. If you build something similar you'll find it is one of the most useful setups around. I use it all the time to wash my cars and it's so much more convenient than lugging around a pressure washer with a wire and a hose for everything to get tangled up. Shoot me an email if you need any assistance getting this up and running.

[@parhamobriant1970]

The receptacle is installed upside down. Yes, it still works. The reason is safety. If a plug is not fully pressed in and a metal item falls down the wall it could cause it to short out. Typical for all receptacles.

[@HorsePowerObsessed]

Yup. All the outlets nowadays are installed this way, unfortunately.

[@parhamobriant1970]

That was a direct quote I was given from my electrical Engineer. I have seen a lot of things done wrong in residential construction over and above electrical. Commercial construction has plenty of issues as well.

[@HorsePowerObsessed]

Yup. All of the outlets I've seen in houses built in the last 50 years are this way. If you flip them over so they are NOT upside down, everyone else thinks they ARE upside down lol

[@Patrick94GSR]

@@parhamobriant1970 there is nothing in the electrical code specifying which way outlets go. Residential is almost always done ground pin down. Commercial is almost always done ground pin up. No idea; that’s just how I’ve seen it done in my near 20 years in architecture and construction.

[@parhamobriant1970]

@@Patrick94GSR My electrical engineers say it is for safety in case of a plug not fully seated and something across the power prongs causing a breaker to flip. It makes sense even if it is not as you say it is not in the code.

[@shoka4095]

always put teflon on clockwise or it backs out.

[@kyleyork4849]

What what anchor toggle bolts and hardware did you use? Can you please rely with link? Thanks!

[@HorsePowerObsessed]

Sure thing. You can get the same ones I used here: amzn.to/3jVNyzm

[@willdamian1066]

Do you have a video reviewing your DI water tank?

[@MMichaelJJ07145]

Does you black MTM hose mark the concrete? I emailed MTM and asked about the difference between their black hose and OGs blue hose. They said it was the same except for the blue is mostly non marking and black marks.

[@HorsePowerObsessed]

I haven't noticed any marking issues.

[@MMichaelJJ07145]

Thanks for the quick response.

[@jermanehoowse4618]

If you’re worried about any marking MTM has a grey kobrajet hose

[@thomasabarca5960]

Great Vid! For your hose reel, is it anchored into studs or just toggle bolts held by drywall?

[@HorsePowerObsessed]

Thank you. Toggle bolts all the way around.

[@thomasabarca5960]

Thanks for the reply. I've been considering a very similar setup but was concerned toggle bolts alone wouldn't get the job done. I'm in a rental with steel studs and I'm hesitant to alter them, so this is great news! 🤙🏽

[@HorsePowerObsessed]

It's been great! The toggle bolts I have hold up to 250 lb per bolt so they're going to be absolutely fine.

[@1320str8liner]

@@HorsePowerObsessed I heard you say 250 in the video, but the one in the provided like says 80 per bolt, am I looking at the wrong ones? I’ve always been scared to use toggle bolts, but I think it’s time I give them a try

[@krazieboy03]

Is there a reason you opted for the hot model version of the AR630 instead of just the cold version?

[@HorsePowerObsessed]

The hot version was the only one that was in stock at the time but the most important part is the total stop system because they do make the same pressure washer without that.

[@jermanehoowse4618]

So he could use hot water?

[@patzimaro1]

Nice setup. Which shelve did you use? Thanks

[@HorsePowerObsessed]

I used this shelf here: bit.ly/3cSvgxU.

[@patzimaro1]

I’m looking to get an ar blue clean as well. Do you recall the size you used? Looks perfect.

[@patzimaro1]

*the shelf size sorry

[@prophet7885]

Which shelf did you use? Is there a reason you use No Spots over diw-20?

[@HorsePowerObsessed]

I used this shelf here: bit.ly/3cSvgxU. The No Spots worked better in my testing and it fit nicer in the area I had for it. I also think it looks nicer and it's much easier to change the resin in it when the time comes.

[@prophet7885]

@@HorsePowerObsessed I think No Spots looks better too. Thanks.

[@HorsePowerObsessed]

You're welcome!

[@gary9879]

@@HorsePowerObsessed what size shelf did you use? The link just takes you to a website...how wide and how deep? Thank you!

[@gary9879]

Also...about how high is the shelf mounted? Great set up and video!!

[@sunnydays1238]

Where did you buy your shelf from?

[@LT4POWERED]

Second channel, “HIO” for Home Improvement Obsessed? Looks great though!

[@HorsePowerObsessed]

lol maybe I should! Thanks, man!

[@LT4POWERED]

I’m on vacation this week and I am going to attempt a ceiling fan install. Hope I don’t blow anything up!

[@HorsePowerObsessed]

Nice! How did it go?

[@LT4POWERED]

Eh, well it’s up and the light and fan both work with the chains but not with the wall switch. So I guess I didn’t wire it correctly. There were two black/hot wires (I capped one with a wire nut) and with the old one the wall switch controlled the light only. It was wired differently than the instructions showed for the new one so I don’t know. At least we have a working light somehow though!

[@jeffchaulk5346]

Is the MTM Hydro SS fitting that goes into the Outlet with a 3/8” plug for the AR630 a 14mm with 3/8” plug or 15MM with 3/8” plug?

[@HorsePowerObsessed]

M22 14mm. You can get a very similar one here for less than from MTM: amzn.to/311Zvwt

[@jeffchaulk5346]

Thanks. I thought so but when I looked at the link at Amazon, it says it is not compatible with the electric AR blue.

[@HorsePowerObsessed]

Amazon gets that stuff wrong a lot! I promise you it works. 👍👍

[@26-CJ]

@@HorsePowerObsessedIf I needed to use a quick connect on the spigot that has female threads to connect to the spigot and the other end of the fitting is the inlet plug. Basically a female thread to spigot and plug on other end of fitting.

[@jcolon2001]

Lol you gave your little lady the smallest roller to paint with instead of a larger roller to cover more area faster her arm had to be exhausted 🤣

[@HorsePowerObsessed]

🤣🤣🤣 This is the one she chose actually! She is very very particular about the way she paints. She literally would not allow me to do any of the painting!

[@jcolon2001]

@@HorsePowerObsessed LOL Yeah my wife is very particular when it comes to things like that also , Did you get the garage floors done yet?

[@HorsePowerObsessed]

Not yet. Still weighing some options.

[@blake8297]

Did you bolt the pressure washer to the shelf?

[@HorsePowerObsessed]

No. The pressure washer has rubber feet on it that prevents movement.

[@RADGarage]

@@HorsePowerObsessed I was going to ask same question. So, no need to bolt. That takes a load off my mind.

[@HorsePowerObsessed]

Yup! No need to bolt. It's been fine like this for over a year.

[@davidbram]

Do you have a link for the inlet hose?

[@HorsePowerObsessed]

Inlet is here: amzn.to/3msi75D

[@kraken509]

What elbow did you use on the water inlet on pump?

[@HorsePowerObsessed]

I actually used this hose kit that had an elbow built into it. amzn.to/3Am4BTi

[@michaelwest307]

Great Video; That 3 part stainless steel shelf? What's the link for that or Manufacture? thanks

[@HorsePowerObsessed]

Thank you! I used this shelf here in 8x16: bit.ly/3cSvgxU.

[@cmd_76]

Any particular Y hose connector you using in this setup bud? This is second one and it's slowly leaking again :(

[@HorsePowerObsessed]

I bought it about a year ago from Walmart so it's nothing special but it does seem solid. I'll see if I can dig up a name for ya.

[@cmd_76]

Cool. Thx bud. Appreciate it

[@HorsePowerObsessed]

This is the same one only it's brass instead of black. I couldn't find the black one anymore. amzn.to/3gVsxUc

[@cmd_76]

Awesome. Thanks brother. You didn't have to go through all that trouble. I appreciate it bud. Thank you

[@Quad631]

Where did u get the cross braided hose that goes from the filter to the pressure washer? And v connection off the Spicket?

[@HorsePowerObsessed]

Stainless hoses: amzn.to/3akn4Vj Y connector spigot: amzn.to/2QANtas

[@supermrevo]

Great video! Where’s the link to the tool at around 5:30? Thanks!

[@HorsePowerObsessed]

I knew I forgot something! You can find it here: amzn.to/3ejmI0y

[@brandonwill4297]

If someone wanted to buy this whole set up. Did you buy multiple of any things ?

[@HorsePowerObsessed]

Yes. The stainless steel quick disconnects you'll need multiples.

[@brandonwill4297]

HorsePower Obsessed okay thanks, and what is the connection between the reel and the jumper hose?

[@HorsePowerObsessed]

That is actually provided with the reel.

[@patzimaro1]

I was wondering what size shelf did you use? Thank you

[@HorsePowerObsessed]

8x18

[@MotorCityMoto]

What size bolts and drill bit for the cox reel?

[@HorsePowerObsessed]

Drywall Toggle Bolts - amzn.to/3vIOOfe

[@tomfaltash9634]

Love the set up but You’ve got a water supply right next to an electrical outlet. I did notice that your electrical has a gfi. That is good, but code states that any electrical outlets need to be at least six feet from a power supply. Just wanted to let you know Justin. Not trying to be a shit. Just letting you know buddy...

[@HorsePowerObsessed]

lol I got ya! The outlet is GFCI and so is the plug on the pressure washer. It's not necessarily up to code, but it looks cleaner this way and nothing would ever happen due to the protection of the outlet and plug.

[@mykey06]

Could you please link the toggle bolts you used to mount the reel? Much appreciated!

[@HorsePowerObsessed]

Absolutely! You can get them here: amzn.to/3vIOOfe

[@mykey06]

@@HorsePowerObsessed I appreciate it!

[@ajbrown2013]

WD40 works great for stainless steel

[@45searay]

You need to take care of that garage floor....

[@HorsePowerObsessed]

It's coming...

[@jermanehoowse4618]

What do you have on yours?

[@goofydog2]

Contact e when you're finished with all the work...

[@HorsePowerObsessed]

The pressure washer setup is complete. 👍👍

[@ajbrown2013]

Never use plaster for muddying drywall never

[@jetdrvr5909]

Hmmm, I wonder were you got all your ideas and product research from....

[@HorsePowerObsessed]

A lot of internet research and trial and error. I bought a few things from Obsessed Garage but didn't care for a lot of his setup and parts used.

[@jermanehoowse4618]

Do a search online. Tons of different resources to find out what parts you could use for your setup

[@jluisp7]

Where did you get the hose bibb mounting plate?

[@HorsePowerObsessed]

It was a wood block I bought at home depot and drilled a hole in the center.

[@blackalligatorstudios]

👋

[@HorsePowerObsessed]

👍👍

[@spear-it]

Great setup ! I just reviewed my pressure washing set up. Check it out!

[@HorsePowerObsessed]

Thanks! Will do!

[@spear-it]

@@HorsePowerObsessed thank you! Let me know what you think

[@HorsePowerObsessed]

Will do!

[@duramaxcountryboy2107]

Your as bad as me all screws have to be the same way or it will drive you nuts

[@HorsePowerObsessed]

Yes sir! It's a real issue...

[@patcap535]

Where did you get your braided hose?

[@HorsePowerObsessed]

Right here: amzn.to/3PWzyWA

[@patcap535]

Thanks