At least one person appreciated you getting it up on the charger! Great work guys, good call on the freeze plugs now.
@horsetorquesdiesel4 жыл бұрын
Thank you!
@HeidiFegles11 ай бұрын
Life hack - wrap your hose where your cutting in electrical tape and cut in the middle both ends are contained of splinters even when you take the tape off. Pretty mind blowing
@johngraves92013 жыл бұрын
Hit the nail on the head when you said you would regret those stage 8 locking bolts in the future! Very clever design and work great but BOY are they a pain!!
@matthewmajcher71804 жыл бұрын
I wish I would have found your channel sooner than last week... Good shit Josh, keep em coming!
@horsetorquesdiesel4 жыл бұрын
Thank you! Channel is still really new!
@colinlawrence21863 жыл бұрын
Josh you make it look so easy and a really neat installation 👍 As always God bless you and stay safe out there 🙋♂️ 🇬🇧
@horsetorquesdiesel3 жыл бұрын
Thanks, you too!
@ferrallderrall65884 жыл бұрын
Freeze plug upgrade looks solid af,sweet little upgrade
@horsetorquesdiesel4 жыл бұрын
Yes would highly recommend it
@joandcorbin4 жыл бұрын
I'm just started watching but I cant believe u dont have more subscribers
@witcher714 жыл бұрын
Yet.
@horsetorquesdiesel4 жыл бұрын
I have only been going for 45 days so I’m thrilled with the progression
@justinilderton4 жыл бұрын
just watched your Buying your first Cummins video you did a month ago and i am literally doing the say thing as y’all i’m in the process of getting my first diesel truck and i’m got my eye on a 06 or 07 5.9 and want to do the same build process as y’all are doing thanks for having all the videos of each process on making big power
@horsetorquesdiesel4 жыл бұрын
No problem I hope the search goes well!
@powerstroketurbo954 жыл бұрын
Awesome video! Showing us the steps and all! Feeling a little more confident about doing this swap myself.
@horsetorquesdiesel4 жыл бұрын
It is pretty straight forward!
@jamesmarlar6964 жыл бұрын
Sweet when I change out my turbo with the one you reccomended to me on my 12 valve some of these lil tips will come in handy as usual good stuff...can't wait to see it on dyno
@horsetorquesdiesel4 жыл бұрын
Me either glad you are enjoying it!
@shawnmathis38433 жыл бұрын
Man, Love the videos. New favorite channel. You in Ohio? Ask bc you went to D&J Machine Overhauling my 05 5.9 soon. Shooting for 800. 100 over injectors, 10mm cp3, 467.7 and the other usual stuff in the valve terrain and supporting mods building out the 48re too all billet shafts i was gonna go with a stock bottom end but i think ive talked myself into rods. keep up the sweet content!!!! very informative.
@horsetorquesdiesel3 жыл бұрын
We live in SW Utah so we road tripped out there!
@joshuaquilliam2887 Жыл бұрын
Glad my 5.9 isn't the only one that sounds like a civic with a fart can lmao. My 6.7 has a great sound to it with a 5" but man the 5.9 sounds so different.
@ryanbrown9184 жыл бұрын
Looks like she got a little loose on ya! Love it
@horsetorquesdiesel4 жыл бұрын
Oh ya loving the s400
@johnevans70654 жыл бұрын
Steed speed’s are sexy. I almost didn’t want to install mine.
@horsetorquesdiesel4 жыл бұрын
I know the feeling! This was my first brand new one
@heavyhans22964 жыл бұрын
You guys make all that work so simple 👏fantastic job
@ToadieSage4 жыл бұрын
That turbo bark 🤤
@horsetorquesdiesel4 жыл бұрын
It’s addicting
@mikestrucks4 жыл бұрын
Hell yeah ! She sounds badass !! Good job guys 😬🤘🏻
@horsetorquesdiesel4 жыл бұрын
Thank you!
@creer32ify4 жыл бұрын
Get that dyno video out!
@horsetorquesdiesel4 жыл бұрын
Very soon!
@brianp55794 жыл бұрын
Damn you got the best content on KZbin.
@horsetorquesdiesel4 жыл бұрын
I greatly appreciate it. I’m having fun so that is an awesome compliment!
@brentmcmahon8188 Жыл бұрын
A company called East Texas Dodge Drive Shafts and smooth as silk !
@Filzkiiz4 жыл бұрын
YesSiRr!!😎👊💯💯🔥🔥🔥
@agipegi4 жыл бұрын
Looking good josh !
@horsetorquesdiesel4 жыл бұрын
Thank you
@brycecox94203 жыл бұрын
What kind of hose is that you used to run to the firewall and also maybe by chance do you remember what fittings you used for the heat exchanger delete?
@horsetorquesdiesel3 жыл бұрын
Silicone 5/8” heater core line from NAPA 1/2npt
@brycecox94203 жыл бұрын
@@horsetorquesdiesel thanks man appreciate it awesome stuff
@hillsautohome3464 жыл бұрын
Great work, fantastic video! P.S. Nice to see someone else running an EnerSys battery, they are top notch!
@horsetorquesdiesel4 жыл бұрын
Love mine, much better than anything else in my opinion
@cosmolinefien31993 жыл бұрын
what size fittings did you use to adapt your coolant line? What size silicone line did you use?
@gtblzd5 ай бұрын
Did you ever figure out the sizes? Im needing to do this to mine as it was converted to a manual from an auto before I bought it and the stock lines are more crap in the way.
@MGRDiesel2 жыл бұрын
Hey bro great job hey where do you buy your parts?
@FSIV69694 жыл бұрын
Nice work 👌🏿
@horsetorquesdiesel4 жыл бұрын
Thank you
@kylehartsell7200 Жыл бұрын
I am getting ready to install a WC (probably) kit to my 07 third gen 5.9. What turbo combo do you recommend? I want a performance set up, but I also tow a RV trailor 6 to 8 times a year. Sometimes a car trailor as well. I currently have a no cat 4 inch exhaust, banks high ram intake horn and filter intake, oil and fuel bypass filters, mechanical fuel pump, quadzilla boost fooler, and a bullydog (which will change to EFI live after compound kit) thinking a 462 to 468 using the stock turbo. Any input would be greatly appreciated. Thanks
@keiferjanz31974 жыл бұрын
You need to do the key, seat belt cycle to turn off the beeping on that thing.
@horsetorquesdiesel4 жыл бұрын
I’ll look into that thanks!
@2DodgeGarage11 ай бұрын
Where did you get the sticker on your radiator? Would be sweet on my 1st and 3rd Gens
@horsetorquesdiesel11 ай бұрын
Holderdown diesel performance
@212clearing3 жыл бұрын
How’d you do the single battery setup with the fuseable link wire coming off the alternator to that side battery and not being there now?
@mayor27822 жыл бұрын
Have a video of what it sounds like at the exhaust tip ?
@FROSTY25884 жыл бұрын
Good work 👍
@horsetorquesdiesel4 жыл бұрын
Thanks Spence!
@DocDoge3 жыл бұрын
Would you say its better to do a 2nd gen swap this way? 2006 and i wanna do a S464 and T4 steed speed like you had in the video. Its hard to justify when the swap kit from fleece with no turbo and no manifold is 900 bucks and i know i can piece it out cheaper. End goal is 650hp
@BigRob345 Жыл бұрын
467.7 with a 0.81 housing make it spool faster?
@RamTahoe4 жыл бұрын
My 06 mega came with a very half assed 2nd swap........ I'm not even gonna really worry bout it, going back to 3rd manifold with my old 63/67
@horsetorquesdiesel4 жыл бұрын
Sometimes those are rough and expensive to do right
@raymedorio19302 жыл бұрын
That turbo surge it's ok for the turbo?
@diesel_gee11873 жыл бұрын
Any chance you could show what you used to block off the other coolant ports from the heater hoses on the drivers side?
@diesel_gee11873 жыл бұрын
Or what size they are?
@bryanstuber48632 жыл бұрын
How much did it cost for that set up roughly?
@jasonfegles89833 жыл бұрын
What do you guys do with the wastegate actuator plug in since the 467.7 doesn’t utilize it ? Or do you just zip ties it away and send it lol
@machinespeed69164 жыл бұрын
Literally doing the exact same thing right now.
@horsetorquesdiesel4 жыл бұрын
Would recommend
@levi5.94 жыл бұрын
God bless America! I need to get on your level
@horsetorquesdiesel4 жыл бұрын
Couldn’t agree more!
@brentmcmahon8188 Жыл бұрын
Get rid of that two piece drive shaft mine was 800 bucks with all new ends on drive shaft no use parts and I think mine was like 72” long 5” diameter I got tired of changing carrier bearing.
@3DProductions3 жыл бұрын
i see the headstuds are done, this truck have the arp2000s or 625s? & has it had the valve springs & pushrods swapped out?
@horsetorquesdiesel3 жыл бұрын
625 ARPs valve springs and pushrods are upgraded as well
@3DProductions2 жыл бұрын
@@horsetorquesdiesel just ordered some 625s for my 18, 3 month wait time oof. Steed speed manifold 14-16 weeks too
@getnlost5547 Жыл бұрын
Do you remember how this setup towed?
@horsetorquesdiesel Жыл бұрын
It was alright it's much better on a 6.7 Cummins
@seanparker65443 жыл бұрын
Do you do any injection upgrades or add a 10mm CP3 or do any transmission work or do you think you don’t need it? I’m just curious cause I’m about to do mine but it is a lot more money if I do those upgrades.
@horsetorquesdiesel3 жыл бұрын
whats the goal?
@michealevert77933 жыл бұрын
What size feed line did you use? I am building a second gen swap now and am using a s364.5. I am wondering if I should use a -4 or a -6 size hose. Thanks
@HeidiFegles11 ай бұрын
Go -6 and restrict if needed for a ball bearing
@nicolasramirez65673 жыл бұрын
Nice!!! Stock ingectors??
@horsetorquesdiesel3 жыл бұрын
DDP 100% overs
@alexbrainard96464 жыл бұрын
What are you guys doing with the fleece cheetah that you pulled off?
@horsetorquesdiesel4 жыл бұрын
Sold it and it went to Texas
@73cjproject4 жыл бұрын
Excellent video! That Steed Speed is gorgeous! Love the tips and tricks. Definitely my favorite channel! It's nice to see the experience without having to go through it myself first. Definitely alleviates some of the nerves about tackling some of these projects. Looks like a very streetable set up. Still capable of towing without being too smoky down low? Did you go with a higher stall on the converter too?
@horsetorquesdiesel4 жыл бұрын
I think you could tow with this it wouldn’t be ideal but could be done easy enough. Yes we have a high stall 200 over stock.
@josedearcos14903 жыл бұрын
How much does the part?
@GM-cq7ek3 жыл бұрын
What’s does it mean when it gives me the option for cast or billet or which one would work best??
@horsetorquesdiesel3 жыл бұрын
Billet will take more overspeed and bark before failure
@jobanirubio56832 жыл бұрын
Can I do a 2nd gen swap on my 05 cummins with the stock turbo?
@horsetorquesdiesel2 жыл бұрын
Yes just have to relocate the waste gate
@gene24v334 жыл бұрын
What for fuel?
@matthewmajcher71804 жыл бұрын
Watch the videos
@gene24v334 жыл бұрын
@@matthewmajcher7180 I can’t ask a question if i missed where he said that?
@tc12544 жыл бұрын
100 over nozzles and I believe a 12mil cp3 dont quote me on it tho
@matthewmajcher71804 жыл бұрын
@@gene24v33 He has talked about his fueling upgrades in his previous videos. If you skim back through, you'll find all of your answers. Josh goes over it quite thoroughly
@jamesmarlar6964 жыл бұрын
Go back about 4 videos all Dynamite Diesel products
@brentmcmahon8188 Жыл бұрын
The are made of aluminum 5”
@brentmcmahon8188 Жыл бұрын
How much would you charge me to do the same thing to my 05 ?
@horsetorquesdiesel Жыл бұрын
A lot of options call us at the shop 276-608-3298
@biggrigg9384 жыл бұрын
shut-ta-ta-ta-tar fakn lol kool video keep it up
@jeffbeaird7474 жыл бұрын
Where do you find the time to run all the way down to Mexico for the burnout sessions. Hahaha
@horsetorquesdiesel4 жыл бұрын
C13 air drops
@codymarshall57533 жыл бұрын
Why is second gen swaps so popular and are the better?
@akrider1745 ай бұрын
I have a 467.7 as well I get lots of shat ta ta? Is this ok?
@horsetorquesdiesel5 ай бұрын
Eventually it can hurt it but s400s are pretty stout
@akrider1745 ай бұрын
@@horsetorquesdiesel so how do you get rid of it?
@horsetorquesdiesel5 ай бұрын
@@akrider174stop chopping the throttle
@pabloajungo76303 жыл бұрын
I thought and from what everyone says that 5.9 isn't great with the s400's spooling them up. There more for a 6.7
@horsetorquesdiesel3 жыл бұрын
83 turbine s400s aren’t bad on a 5.9 with a loose convert
@TheProchargedmopar4 жыл бұрын
👍
@bthorn5035 Жыл бұрын
Has anyone ever swapped an older 5.9 into a 6.4 truck?
@HeidiFegles11 ай бұрын
Just rip it out and never put that factory drain hose back in ever. Get the an adaptor so much nicer.
@1997steven19973 жыл бұрын
You want to sell the fleece cheetah?
@jeepsnthings5654 жыл бұрын
I've always thought that it's a bad thing when the turbo makes that sound. Isn't it fighting the air that's not entering the the cylinders?
@horsetorquesdiesel4 жыл бұрын
It’s barking, it’s hard on them but s400s are tough SOBs so it will be fine
@robertturnbull29034 жыл бұрын
Didn't even let the he351 have a chance
@horsetorquesdiesel4 жыл бұрын
I drove it for 3 weeks it was fun but I miss high rpm power
@shelbymoore81403 жыл бұрын
You want to sell the 1.10 housing?
@horsetorquesdiesel3 жыл бұрын
No gonna hold onto it
@shelbymoore81403 жыл бұрын
I don’t blame you. Thanks for getting back!
@eliwillis13 жыл бұрын
@@horsetorquesdiesel I think this is the turbo and Hp range I would like to shoot for. I’m just learning all this turbo talk. How come you go .90 housing ? Spool faster? I’m starting from scratch learning this stuff. Got my cart at PDD stuffed full of parts after watching all your vids. Just wanna make the right call before I checkout. PDD doesn’t list that housing on their website, but I’ll have them get me one if I need it. Thanks again I’m sure it’s hard responding to every comment
@horsetorquesdiesel3 жыл бұрын
@@eliwillis1 .90’ because we live at 6000 ft and it was a 5.9 truck
@TheProchargedmopar4 жыл бұрын
What is your Instagram? I tried searching from what you said in another vid but nothing coming up. I did find your employers IG.