Hot Rod Wood Chipper RETURNS! Machining is DONE!

That's right, you read the title right! Our AMC 304 V8 Powered Wood Chipper is going to live again! After some, or a lot, of machining by our good friend Mike at M&M Head Service in Delaware, the 304 AMC block is ready for final cleaning and reassembly.
Fortunately for us, we have been doing a lot of AMC V8 stuff over the last few years and though the bores of this block were horrible, we happened to have a used set of .030 over pistons and rods already sitting around. So block work, clean up the crankshaft, and we're ready to put this thing back together and back into service! Thanks for turning this around so quickly Mike!

[@terryeustice5399]

Thank you Rich for the update. Merry Christmas and Seasons Greetings! 🎁🎄

[@SeanJoseph-s2s]

Happy Holidays to everyone at the shop.... good content and thanks...🔧🔧👍

[@randyhyde7222]

Merry Christmas have a great holiday.

[@jasonhayden7597]

Merry Christmas Rich ,Austin, and the whole crew

[@terryeustice5399]

Thanks!

[@WiSeNhEiMeR-1369]

HOWdy LUCORE - Rich, Thanks for the AMC V-8 Content COOP the WiSeNhEiMeR from Richmond, INDIANA ...

[@OriginalMomo]

Merry Christmas, to Rich and the boys @Lucore!

[@hydroy1]

Merry Christmas, to Rich

[@peterkovacs8654]

Cool, chipper content, different

[@98Z28LS1]

👍👍

[@shoresharp8349]

Make sure you do some research on if your chipper knives have to be balanced. The last thing you want is that drum spinning 50k rpm to and the knives be out of balance. We always took the knives out and sent to a machine shop for sharping. Chipper was a 18inch barco she would eat a 18inch oak.log like nothing!!! If you could get it in the throat she would eat!! We accidentally fed a log in with a 1/2 chain and she ate the chain and threw it threw the chipperbox. Not good !!!

[@johndillinger8482]

what happened to the pontiac 350?

[@LucoreAuto]

Awaiting parts that should be arriving Monday

[@johnbean1994]

Not impressed with that machine shop! Nasty work! Bob would have done better