Hot toys Delorean disassembly

[@LexterminateFlamejob]

Dude! Life saver! Got mine imported from italy in total working order,arrived with lights not working. I was gutted! The guy gave me the hot toys marty as a apology,but ive never been totally happy. Mow i can finally get in this thing and sort it out. Bless ya!

[@LexterminateFlamejob]

Took mine spart following your instructions,and im ecstatic to say its now in 100% working order! Cannot thank you enough. Took about an hour and s half for disassembly,repair and reassembly. Very happy guy here in blighty. Cheers my friend.👍👍👍👍

[@2NDCBT]

Brother, that's awesome!!! Can't tell you how happy I am to know that this helped! I love sharing my ideas and ways to fix things in the community!

[@LexterminateFlamejob]

@@2NDCBT if you hadn't have shown the screws behind the grill,i would never have guessed how to get in it. I was praying that it was all the same set up,as mine is the original hot toys delorean. All it was was the wires on the power button had been bent back. Every time i walk past it now i have to switch it on and look at it. 🤣👍

[@2NDCBT]

@@LexterminateFlamejob If you could see the smile on my face!!! I really am happy for you, and believe me, I know exactly how you feel knowing that everything works fine! So awesome!

[@BrianLaliberte]

Dude, you are a legend! This just saved me a ton of work! Please field strip walkthrough toys. This is great!

[@2NDCBT]

So glad that this helped.

[@BrianLaliberte]

Invaluable. If you recorded your entire field strip I would really, REALLy, like to see it.@@2NDCBT

[@2NDCBT]

@@BrianLaliberte I'll try to get it uploaded when I do it again😀

[@frankocerrutti2156]

There is a lot of Hot toys deloreans out there, and a lot of them with issues, that's why I find this video very helpful to those who want to fix those issues more efficiently... I have a problem with mine on the hood but I can fix it with glue, good video ! take care

[@2NDCBT]

I'm so glad that you found this video helpful! I like helping out my fellow collectors.

[@manuelsumaker2845]

Hola sabrías si con el delorean si compro las figuras de neca quedarían bien o serían demasiado pequeñas....? O sabes alguna marca que sea buena calidad y más asequible...Ya me das tu opinión gracias

[@2NDCBT]

@@manuelsumaker2845 Hola. He visto a algunas personas poner esas cifras en vehiculos a escala 1/6 a veces me parecen un poco pequenas. Pero a veces se ven bien,pero si funciona para ti, lo haria, entenderia por que, porque las figuras de juguetes calientes son muy caras, espero que esto ayude.

[@manuelsumaker2845]

@@2NDCBT pues muchas gracias las voy a pedir ahora mismo !!! Sería interesante hacer un vídeo con esas figuras para más gente !!! Jejee un abrazo y gracias

[@2NDCBT]

@@manuelsumaker2845 Denada!

[@txwing99]

THANK YOU!!! Finally someone shows us how it’s done!!! 😊

[@2NDCBT]

Much appreciated!!!

[@scifiismyjam4387]

They brought the real Back to the future Delorean to a Comicbook convention in Eastbourne last year, got to see it in person and some lucky peeps managed to get a tour of the inside. This thing looks almost identical to the real deal.

[@2NDCBT]

I've only seen two in person. Thank you for watching brother!

[@2NDCBT]

I'm almost certain that most of us wanted to know how to take this thing apart! I took the leap but to be honest, it was very scary! 😂

[@Rob-z7k]

Thats a beautiful collectors item!

[@bimmerwill925]

Very nice bud! Ive been itching to rip mine apart to wire in some flux band lights and swap out the headlight leds for some some slightly warmer leds. The rear looks likes it will be a real pain. Excellent info though!

[@2NDCBT]

OMG! I had forgotten to mention that I was going to swap out the headlights! I'm going to paint some details on the inside door buttons. I hope this video helps out. Thank you for watching!

[@rudysonesixthworld]

😮 I give you a ton of credit for doing that! lol. Another great video!

[@2NDCBT]

You are awesome Rudy!!! Thank you brother! Trust me, I was asking myself "Whaat the heck did I get myself into! 😂

[@GladiatorJourney]

looks like my car after a weekend bender! 😂

[@2NDCBT]

Too funny Brother! Had a truck that ended up like that in the mission district! Remember? 😂😂😂

[@manuelsumaker2845]

Hola acabo de recibir el delorean 1/6 de hot toys,quedaría bien si compro las figuras de neca para completarla? Ya que no me viene bien comprar las de hot toys....de marty....ect ...gracias

[@2NDCBT]

Hola. He visto a algunas personas poner esas cifras en vehiculos a escala 1/6 a veces me parecen un poco pequenas. Pero a veces se ven bien,pero si funciona para ti, lo haria, entenderia por que, porque las figuras de juguetes calientes son muy caras, espero que esto ayude.

[@BrianLaliberte]

Do you have to unscrew the windshield to open op the electronics under the hood/trunk?

[@2NDCBT]

No, you don't but it's best to get the windshield out of the way. It's also a very tight fit where the windshield and the "Fender clip" meet. I found that when I tried to just remove the clip without removing the windshield screws it was tough to lift up the fender clip on that end. Just me. Lol. Hope that helped.

[@BrianLaliberte]

Dude, you are the fucking man!

[@2NDCBT]

@@BrianLaliberte Thank you brother!

[@МартиМакфлаев]

😎🎸👍👏🏆🥇🔥🔥🔥🔥🔥

[@2NDCBT]

Totally appreciate you!

[@alanjames6236]

Great vid ,the one reason i wont by this is the car inacuracy, nothing is ever perfect but the front of the gullwing door window frame is tapered ,thick at the bottom and thin up the top ,plus other models are more accurate with no sharp edge at the top of the door ,running down the rear window frame .its curved not sharp angled ,making it way less sleek than the real car ,not worried about the time travel parts as theres room for inacuracy ,but the car should look right,most dont notice due to its size and features .

[@2NDCBT]

Roger that. Thank you for your reply and thank you for watching.

[@erikmagnuson4499]

Hey Tony. Maybe you remember I asked you last year about a problem I had with my Delorean having a loose wheel assembly, specifically the joint on the axle responsible for the front wheel swivel? Anyway, it is just a missing screw and washer that was either not installed at the factory or somehow came loose in transit. I was hoping to simply replace the missing screw--easy enough, right? Well, after watching your video, it is obvious to me that even if I strip the vehicle down this far, I still won't have access to install this screw because the wheel well will still be in the way. Unless there is some specialty tool that allows for small screws to be installed around corners, more deconstruction is required. This screw must be placed very early on construction before the body is even placed on the frame. I will heed Grandma Marine's advice, and I won't bother trying to fix it. At least the joint isn't load bearing and, once properly placed, even without the screw, it does not come undone by itself.

[@2NDCBT]

I remember.😊But there is a way to remove the wheel to get it out of the way. There is a screw that is covered by the DMC hubcap. That may help but it is true, if you don't have to mess with it then don't...But...there is a way. Take care my friend.

[@2NDCBT]

Question: How come Doc Brown did not use parts from the Delorean that he hid in the cave while in the 1800'S to fix the one Marty brought back? Technically there should have been Two Delorean's when Marty went back to the 1800's! The one Doc hid in the cave and the one Marty used to go back in time! Just asking!😂

[@marineboy4622]

Marty wouldn't have been able to get back to the 1800's if Doc took parts from the cave car. As soon as any parts were removed, Marty and the repaired car, would start to disappear.

[@2NDCBT]

@@marineboy4622 Good theory!

[@marineboy4622]

@@2NDCBT What 1885 Doc should have done was to leave himself a note with the cave car, telling 55 Doc what happened when Marty travelled back to 1885. With the knowledge of the car being damaged upon arriving in 1885, 55 Doc would make sure to pack a spare fuel line and a jerrycan of gas. Assuming the damage was unavoidable, 1885 Doc would have the parts and gas needed for the return trip, so no need for the train.

[@2NDCBT]

@@marineboy4622 That's a great idea!

[@txgame9305]

Nah the delorean got in the hood💀

[@2NDCBT]

Thank you for watching.

[@luizalmeida9399]

Honda s2000 ..

[@2NDCBT]

Thanks for watching

[@rasheedwallace2113]

Tu pues du cul dude!!!!!

[@2NDCBT]

Thanks for watching brother!

[@venger]

Hi. My dash connectors for the time circuit and dash lights have somehow disconnected (probably during shipping) how 'easy' would it be to remove the dashboard to re-connect them?

[@2NDCBT]

I haven't gone that far yet. The only thing in the dashboards are the bulbs. The connectors are on the front fender clip, Bumpers and coming out of the middle of the floorboards (0:22) and on the front plate where the 'fender clip' was (also at 0:22). Check those connections. hope this will help.