I contacted Jay about this topic after his initial video and he was incredibly helpful and kind with his time in answer my questions.
@jayguitar6 ай бұрын
Thanks for the great Q Gabe! It really got me thinking about setting it up for live 😊 🙏 I appreciate it man! I should have give you a credit on the video! Completely slipped my mind! Apologies. Btw, I didn't realise that they had included an update in the latest firmware (v1.0.4) that adds the ability to change the global I/O Settings so that you can turn off the Cab/IR blocks either for the left or right outputs. However, they haven't included the ability to turn off the Cab/IR for lets say the unbalanced out and leave the Cab/IR on for the balanced so that you can run a dry stereo signal into a stereo power amp and two cabs (or tow FRFR speakers) and the wet to front of house. Maybe they will add it in a future update as that would be helpful. Have an awesome day.
@gabrielstevens416 ай бұрын
@@jayguitar no worries at all, I just appreciate your time and showing how this unit can be utilized!
@TVoltG6 ай бұрын
Oh this is the video I have been wanting to see. Thank you Jay. Will be home early today and will watch this fully with my monitors.
@GOW3epic6 ай бұрын
Thank you very much for your help. Rock on!
@anthonycosta26625 ай бұрын
Thank you Jay!!!
@vintagetone226 ай бұрын
Very nice upload my friend.superb player.👍⚘🌹⚘🌹⚘⚘🎸🎸
@jayguitar6 ай бұрын
Thanks! Much appreciated man! Have an awesome day.
@Elektrifekt6 ай бұрын
I would love to take guitar lessons from this guy.
@jayguitar6 ай бұрын
Very kind of you thanks! Have an awesome day.
@deeseen34952 ай бұрын
Great stuff
@josegeraldino27946 ай бұрын
Great video. The fact that you can't us more effects, they may need to send some updates tu optimize that DSP problem.
@jayguitar6 ай бұрын
Yes thats a good point about the FX. Something that I have flagged for a while with the Ampero. The DSP does run out. Have a great day.
@danielsandoval18602 ай бұрын
Hello Jay, loved the video and helped a lot. Do you know how to record mic or voice (i have a microphone connected with xlr) but logic does not read it. Can you help me out? Thanks!!
@matheushelt51356 ай бұрын
Nicee!
@fuzzfizz4 ай бұрын
This is the reason why i wont buy this for now. My ideal chain is, comp-wah-od-trem-amp-chorus-reverb-delay-(output to poweramp here)-cabinet-(output xlr to foh). With fm3, i can really do this, my foh out is stereo (because stereo cab block), and my power amp out is mono (summed at the output). I can also split the signal just after amp block and duplicate the effects for mono power amp out, while moving my effects after the cabinet block to get a better tone at the foh. With my mooer ge300 i can do the first chain but the cab block is mono though, and to make it stereo at the foh, i have to split it after the amp block, but i cant have effects for my poweramp out. But the main point is i can move both output anywhere i want. Disabling cab only at the left output, like some modeller do, is not going to do much as the foh is still mono. Kemper has a function which you can do whatever chain you like and disabling the cab at the monitor outs, achieving the same goal. With the ampero stage, i can only either do a mono split with one output have the cab disabled (like valeton), or split it in the middle but my poweramp out don't have effects like I'm doing with my mooer now. The reason for this is when i gig, i want they to take my xlr out but when i practice, i just want to hear from the cabinet speakers. So my suggestion to hotone is, have the ability to to this Y to AB split, but can be split anywhere in the chain so that i can use more effects in my chain before i split it to poweramp and foh output.
@jepoyfilosopo78393 ай бұрын
Hi Jay! New subscriber here 😊😊😊, can you explain these i/o settings oultput Left No cab, cab only, ir only, cab/ir
@jayguitar2 ай бұрын
Welcome and thank for the sub! In all honesty I can't recall all the settings - details will be on the video or in the manual for the unit 🙏 Have an awesome day!
@jordiumethar49636 ай бұрын
You leave me stunned. how cool
@oz.faemine4 ай бұрын
Is this possible on the Amperso II Stomp?
@siena95946 ай бұрын
Jay, nice one great video!! I noticed in the recently released 1.04 firmware update for this unit it now has 'No Cab function added (Global > I/O'.. does this mean you can switch off and cab/IR in that particular out put, so you can go straight to power amp and cab, therefore freeing up some much needed extra DSP?
@jayguitar6 ай бұрын
Thanks so much for the heads up about that! I installed the updated firmware and it has kinda made my video redundant! 😂 The function to turn off the cab for left and right outputs independently is certainly there now and works (I tried it this morning). It doesnt however seem to have the ability to assign cab/IR to the balanced outputs (for lets say front of house) and the unbalanced outputs without cab/IR so you can run into an FRFR or poweramp/cab. I think they missed a trick here. Maybe they can add it in a future firmware update. Have an awesome day and thanks again for letting me know!
@hanspietervansteincallenfe66555 ай бұрын
@@jayguitar Thanks for this video. I think you're right that the new firmware is only half a solution, as you can only turn off the cab or IR's for all outputs (although you could turn it off for L or R and route the signal the way you want it (say the signal with cab / IR to the L output, and the one without to the R output). I tried this and it works, the only issue is if you play with headphones, one side sounds horrible because it lacks the cab / IR. Another option is not to use the no cab setting (as in your video) and route the one to FOH to the balanced outputs and the one without cab / IR to the unbalanced, you won't necessarily need to go to the FX send out. Also: to use less DSP you could put reverb delay before the split, so you wouldn't need to have duplicates. And one more thing: I think if you want to use an FRFR for stage monitoring, you want to send a signal with cab / IR to your speaker, otherwise it will sound pretty bad. I think you would only want to skip cab / IR if you're using a regular power amp + guitar cab. Anyway, thanks for the video, very useful, you have a very laidback and friendly style which makes it fun to watch. Keep it up!
@jayguitar5 ай бұрын
@@hanspietervansteincallenfe6655 Thanks man! I appreciate the additional info! Yeah the cab off option in the menu kinda works - hopefully I can feed that back to them and they can fix it to a better solution. Good point about the FRFR sound and also the effects! I didn’t even think of that - it would make sense. My ‘studio’ brain was on when doing the setup - I always add the effects after the cab when recording. Thanks again and have an awesome day!
@billy46435 ай бұрын
Hi Jay! I saw your Yamaha thr, have you tried the hotone stage with the Yamaha in flat mode? I would be interested to know if it sounds good?
@jayguitar5 ай бұрын
That’s a great idea! I imagine that it would sound pretty cool. I think some experimenting needs doing 🤔 Have an awesome day!
@fhhghggf60386 ай бұрын
Hi mate great videos...can it not be set up so that all presets/scenes have a cabinet on the xlr outs..to front of house and no cabinet on the jack outputs?..that wld leave the fx loop free to use for other pedals
@z00rginal6 ай бұрын
It seems to be possible, check page 36 in the manual. Getting my unit on tuesday, yay!
@jayguitar6 ай бұрын
Hey dude, thats a great Q - I didn't realise that they had included an update in the latest firmware (v1.0.4) that adds the ability to change the global I/O Settings so that you can turn off the Cab/IR blocks either for the left or right outputs. However, they haven't included the ability to turn off the Cab/IR for lets say the unbalanced out and leave the Cab/IR on for the balanced so that you can run a dry stereo signal into a stereo power amp and two cabs (or tow FRFR speakers) and the wet to front of house. Maybe they will add it in a future update as that would be helpful. Have an awesome day.
@IlyaBiOxiMoV3 ай бұрын
hi, where can I download cabinet impulses for your presets?
@jayguitar3 ай бұрын
Hey dude, you can find my signature IR pack in my webstore 😊 bit.ly/JP-IR-Pack - hope that helps. Have an awesome day!
@nishanthreghunath88454 ай бұрын
Hi, I am noob at guitar gears, hence my query might seem Silly. Could anyone tell me whether we can use the stage as a guitar and vocal processor at the same time. As in, use it like the tc helicon play electric.
@jayguitar4 ай бұрын
Hey dude, yes it can be used that way - you can set up a parallel signal so that one chain of effects is for vocals and the other is for guitar, and then you can route them to different outputs so that you can have guitar and vocals together. Hope that helps. Have an awesome day!
@nishanthreghunath88454 ай бұрын
@@jayguitar thank you so much mam. Ordering one right away. It's actually very hard to come across hotone users in my locality. Everyone using either a line 6 or axe fx. Your answer has helped me to finalise my purchase. Getting the stage right away. Thanks once again
@ReksoWaskito6 ай бұрын
Can ampero 2 Stomp do this?
@jayguitar5 ай бұрын
That’s a great Q. I have no idea if it can. I will have to check into that. Have an awesome day.
@erickpontes2564Күн бұрын
Yes, you can! Sometimes when I play live the sound engineer wants me to send two guitar signals: one from the amp mic’ed and other using a direct box. What I do with my Ampero 2 stomp is sending one signal with IR to the direct box and other to the amp without it. To do that you just need to go to the global settings and choose the option “no cab” (or IR) to the output that is going to an amplifier.
@JoeBaermann5 ай бұрын
Signal split done as I thought it had to with the Ampero 2’s, which is utter crap. You are loosing the abilty to add additional fx pre IR and it steal resources by using double up post fx on a unit that already is starved. It should be a native feature to turn of IR on either output, like it is in many other pedals of this kind. Might as well just get the Stomp and 4 cable it with a preamp pedal that does separate outputs without the need of doubling paths or get one of the more original multi fx pedals that cost a tad more.
@jayguitar5 ай бұрын
I hear you about the set up - they have updated the firmware and it is possible to switch off the IR/CAB to the outputs but its not perfect in how it works. Hopefully they will update the firmware again and improve it 🙏 Have an awesome day!