Hotpoint / Indesit Dryer Not collecting Water

[@washingmachinetipsandhelp4350]

Please feel free to buy me a Beer if this video helped. You know us Irish and Beer 🍺🙂paypal.me/washingmachinetips?locale.x=en_US

[@ilijaeirann8180]

You sir are my hero, I managed to fix my dryer following your instructions.

[@washingmachinetipsandhelp4350]

Excellent 👍😎

[@SamDaviesBuilder]

Thanks for this - just used this video to help me clean out the water collection tray and now it’s collecting water again 😃

[@washingmachinetipsandhelp4350]

Brill, Glad to hear it helped Sam, And Thanks so much for the Sub. 👍

[@washingmachinetipsandhelp4350]

Ps- Also subbed to your channel too! So great videos on there !

[@SamDaviesBuilder]

@@washingmachinetipsandhelp4350 thanks! All the best on your way to 1000 subs…I don’t think you’ll have to wait too much longer!

[@washingmachinetipsandhelp4350]

@@SamDaviesBuilder thanks Sam. Ah it’s taking long enough 😂 - Only just over half way there and at it more than a year. I’ll keep at it though. Will get there in the End ✌️- Thanks a mill again Sam

[@ninabradley3870]

Thank you! Pump was full of water. I was able to get into it watching your video 😊

[@washingmachinetipsandhelp4350]

That’s Great Nina, I’m glad it was of help to you 🙂

[@9KS6_]

Hope this sorts out my issue, I've subscribed n thanks for the video

[@washingmachinetipsandhelp4350]

No problem Ki- Thank you for subscribing 👍

[@blackhole9387]

You are my hero! 🎉

[@washingmachinetipsandhelp4350]

👍🙂

[@kostaspapas7184]

congratulations for your video

[@washingmachinetipsandhelp4350]

Thank you! 😃

[@Dazgrego]

Where to buy the pump. Assume I need new one As no water going into top drawer. Filling up in the bottom container and red light full water comes on. And then dryer goes cold. When I empty the water out. It works again till it’s full again

[@washingmachinetipsandhelp4350]

@@Dazgrego espares

[@charlottebrennan7576]

Hi, the box that collects the water under the pump. Do you know how to replace one of those or where I would get a replacement from?

[@washingmachinetipsandhelp4350]

Hey, I think that is actually part of the Machine and can’t be replaced. I am open to correction though on that

[@Thursdaym2]

Very good but noticed you replaced with a housing unit containing a pump not just the pump. Can the pump be separated from the unit or does that vary from model to model

[@washingmachinetipsandhelp4350]

No the pump can be replaced separately 🙂👌👍

[@pvas77]

My pump seems to be operating 100% of the time. Is this a fault with the float? Isnt the pump supposed to turn off when the float is its low position?

[@washingmachinetipsandhelp4350]

@@pvas77 Hi, Apologies I only saw this, I was away on holiday. Did you manage to get it sorted out ?

[@dodgytaxi]

Brilliant thank you

[@washingmachinetipsandhelp4350]

You are very welcome 🙂👍

[@HiruS22]

Thanks 👍

[@Dawnybm1]

My dryer sounds like it’s draining water but that’s it. It’s not turning or drying. Thanks to you I took it to bits and the bottom was full of sludge. I’ve cleaned it all out but it’s still just making the draining sound. Do I need a new pump?

[@washingmachinetipsandhelp4350]

Hey There! Love the channel name! Would love an all nighter but not sure the body would be able 🤔 - Anyway Is your machine a condenser dryer and what make is it please ?

[@Dawnybm1]

@@washingmachinetipsandhelp4350 its a condenser indesit. It’s exactly like the one in video.

[@Dawnybm1]

@@washingmachinetipsandhelp4350 Just realised what you meant by channel name 😂 my granddaughters have high jacked my account. I can’t do all nighters now. Usually in bed by 8 😂

[@washingmachinetipsandhelp4350]

🤣Oh I can do them but I need to take two days off to stay in bed after it! Sorry now for the questions-so with a load from the washing machine is the drum not turning?

[@Dawnybm1]

@@washingmachinetipsandhelp4350 no nothing is happening. Just making a buzzing sound.

[@Alana12]

Where can I get the white tube from lost mine in transit

[@washingmachinetipsandhelp4350]

This is where I get my parts. Here is the part you are looking for. www.espares.co.uk/product/es660885/tumble-dryer-drain-pipe

[@gemmaharrison9584]

That's great wat if my pipes at the back were in the wrong hole on the bottom of the dryer wat damage can it cause if I put it on like this for one load of washing I've put them right now but I hope I haven't damaged my dryer

[@washingmachinetipsandhelp4350]

Hi Gemma. It should be ok if you only did one cycle 👍

[@gemmaharrison9584]

@@washingmachinetipsandhelp4350 oh thank god lol where would the water have gone just so I can clean it all out

[@washingmachinetipsandhelp4350]

If you take the condenser box out (Bottom left) held in with 3 clips and clean out any water in there you should be right as rain 🙂👍

[@gemmaharrison9584]

@@washingmachinetipsandhelp4350 thanks 😊 🙏 life saver

[@washingmachinetipsandhelp4350]

No prob. May I ask you to give my channel a sub to help me get to the 1000 subs (nearly There) 🙂🙂

[@initialb5009]

Can the rubber be bought seperate?

[@washingmachinetipsandhelp4350]

Hi- Yes it can 👍

[@Gary_Cross]

@@washingmachinetipsandhelp4350 Do you have a link at all? Thanks

[@washingmachinetipsandhelp4350]

Hi Gary, a link for what may I ask please ?

[@hardworker8030]

Would you know what causes the pump on a hotpoint tumble dryer to make a funny noise but still pumps water.

[@washingmachinetipsandhelp4350]

Hey. Unfortunately sometimes they just go noisey over time. I have had to change quiet a few, like you said pumps fine but very nosey. When taking out the old pump everything seems to be in perfect condition. Just wear and tear is all.

[@1988AcidRevival]

Nice one.

[@washingmachinetipsandhelp4350]

No problem. May I ask you to subscribe- Please 🤞Closing in on 500 subs 🤞

[@stoqntodorov3198]

Why is my pump constantly running? I press and release the float and it is constantly spinning.

[@washingmachinetipsandhelp4350]

@@stoqntodorov3198 sounds like a faulty pump or there is a slight chance it is the PCB. I’d change the pump, Worth a try

[@stoqntodorov3198]

I will replace the pump, the old pump has a broken propeller. Hopefully with the new pump, when the float is pressed and released, it stops and starts correctly.

[@washingmachinetipsandhelp4350]

@stoqntodorov3198 excellent ! Good luck !

[@sherrybray1725]

Help!!! Replaced the pump but still not drawing 😢 any tips?

[@sherrybray1725]

Draining in to the drawer.

[@washingmachinetipsandhelp4350]

@@sherrybray1725 you probabaly have a blockage. With rhetoric condenser box out reach into the very back right corner make sure there and the channel that leads to it is completely clear of lint and wet fluff

[@1992mattyowen]

Mine has started leaking from the condenser recently, under said condenser was like foam that was really wet to the touch, I pulled it off (big mistake) as it started leaking more, the collection tray at the top is always empty now, is it possible possible replace the foam do you know? Thanks.

[@washingmachinetipsandhelp4350]

Hi Matt, I think the main issue you have is the dryer not pumping water into the water collection tray. This will either be a blockage or a problem with the pump. At the back corner of the dryer you will see a bulged plastic cover. If you can take this off (be gentle as it is held onto the back of the dryer with flimsy enough clips) clean up inside there first.!also make sure the pump propeller is ok as sometimes these get damaged stopping the water pumping up into the water tray. If all here seems ok, pull on the condenser you mentioned above and reach in and get all the fluff you can get out out of it. Especially the bottom right as there is a hole there that can get blocked which stops the water getting down into the pump chamber. Let me know how you get on 👍

[@williamknifeman7330]

🙏🏻 Legend

[@washingmachinetipsandhelp4350]

Glad it helped. Please Sub if you don’t mind 🙂

[@washingmachinetipsandhelp4350]

Thanks 👍

[@craigo531]

I did this and it's still not working what could it be after that

[@washingmachinetipsandhelp4350]

@@craigo531 Can you explain what you tried, Dave me arching over the video

[@craigo531]

@@washingmachinetipsandhelp4350 yes so I bought a new pump for the dryer and switched it out today no problem but it's still not drying the clothes heats up no issue just won't collect water or lint

[@craigo531]

@@washingmachinetipsandhelp4350 I got a new pump and replaced it no problem made sure all the wires went to the same place and put the unit back in but the dryer is still not drying the clothes not collecting water or lint