House Washing XJET M5 Twist

Soft Wash House Washing. We use biodegradable solutions to properly clean your home with safe low pressure. Guaranteed to kill all organic mold and algae and keep it away up to 4X longer than using just a pressure washer.
Gibsonspw.com

[@dlsimes]

Looks like you added a much longer siphon hose. We have not found a biodegradable solution yet that will clean algae like SH.

[@gibsonspressurewashing9986]

Bleach is best

[@Ben-sv9op]

You're doing something wrong. Not sure what chemical strength they're using but you got a pre wash spray chemical. Let sit ten fifteen minutes and everything should be disappeared easily.

[@erikservices]

Nice job

[@melvinn5293]

Soft wash doesn’t need too much pressure Let the chemical do the job And if you want to do it quick Then use sodium hypochlorite 10 percent and mixed up with soap

[@aidanspoon]

What soap do u recommend

[@flying-fijiantv6282]

@@aidanspoon dawn or any soap. Soap is used so it doesn’t run off so quickly. It’ll stick to whatever surface you’re spraying it on

[@powerfulimprovements]

Fun right?!

[@ssplaya713]

Will this product dilute chemical’s and if so by how much? Thank you.

[@kristopherrainbolt2617]

What valves are you using for the xjet? I noticed the flexilla

[@flying-fijiantv6282]

Looks like you did it right. I mean the dirt is gone 🤷🏽‍♂️

[@Ben-sv9op]

And hit the gutters with sh as well can't leave it that way looks wack but good luck

[@ChristianRodriguez-fs3ch]

Can I ask what siphon hose your using with your x jet? Is that like a flexzilla hose? If so which one? Thanks!

[@gibsonspressurewashing9986]

Flexzilla 3/8” air hose. Just cut the ends off and it will fit on the Xjet nozzle

[@littlebritches8631]

Do you have an extra long syphon tube or something??

[@erikservices]

You can use up to 100 feet

[@rsookdd8632]

Are you rinsing with the xjet nozzle?

[@gibsonspressurewashing9986]

Yes

[@rsookdd8632]

What’s your ratio for a 5 gallon pale? With the xjet if you are doing 1% not too dirty house

[@andreamanning5075]

@@gibsonspressurewashing9986 thank you for what you do. Ill add you to my prayer list. Much love. Miss manning

[@snapnpiksallthetime7672]

you working on christmas lol

[@nxt-gengaming8453]

His batch was weak needs to be stronger

[@softwashscience]

So your not getting proper coverage when your treating the siding and looks like your surfactant content is to low. Try not to spray up into the soffit like that and maybe do a smaller section at a time. What was your mix strength on surface contact? Also maybe most importantly here you need to treat it with your mix until the green is gone and then rinse with low pressure below 450 psi honestly try 150-250 and check with an inline pressure gauge they are cheap and this will speed you way up.

[@firstclassfrank]

Gibson’s Pressure Washing I’m 2 jobs in. Where can I get a downstream injector ?

[@softwashscience]

Frank Makle almost anywhere.

[@melvinn5293]

I’ve done it before with a back pack sprayer 3 gallons of water and half gallon of sodium hypochlorite 10 percent mixed with soap And that works great and fast!!!!

[@davewatters718]

rookie